Re: [PATCH 2/3] hwrng: exynos - add Samsung Exynos True RNG driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/23/2017 09:09 AM, Łukasz Stelmach wrote:
> Add support for True Random Number Generator found in Samsung Exynos
> 5250+ SoCs.
> 
> Signed-off-by: Łukasz Stelmach <l.stelmach@xxxxxxxxxxx>
> ---
>  MAINTAINERS                          |   7 +
>  drivers/char/hw_random/Kconfig       |  12 ++
>  drivers/char/hw_random/Makefile      |   1 +
>  drivers/char/hw_random/exynos-trng.c | 256 +++++++++++++++++++++++++++++++++++
>  4 files changed, 276 insertions(+)
>  create mode 100644 drivers/char/hw_random/exynos-trng.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2811a211632c..992074cca612 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11780,6 +11780,13 @@ S:	Maintained
>  F:	drivers/crypto/exynos-rng.c
>  F:	Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt
>  
> +SAMSUNG EXYNOS TRUE RANDOM NUMBER GENERATOR (TRNG) DRIVER
> +M:	Łukasz Stelmach <l.stelmach@xxxxxxxxxxx>
> +L:	linux-samsung-soc@xxxxxxxxxxxxxxx
> +S:	Maintained
> +F:	drivers/char/hw_random/exynos-trng.c
> +F:	Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.txt
> +
>  SAMSUNG FRAMEBUFFER DRIVER
>  M:	Jingoo Han <jingoohan1@xxxxxxxxx>
>  L:	linux-fbdev@xxxxxxxxxxxxxxx
> diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> index 95a031e9eced..a788ac07081b 100644
> --- a/drivers/char/hw_random/Kconfig
> +++ b/drivers/char/hw_random/Kconfig
> @@ -449,6 +449,18 @@ config HW_RANDOM_S390
>  
>  	  If unsure, say Y.
>  
> +config HW_RANDOM_EXYNOS
> +       tristate "Samsung Exynos True Random Number Generator support"
> +       depends on ARCH_EXYNOS || COMPILE_TEST
> +       default HW_RANDOM
> +       ---help---
> +         This driver provides support for the True Random Number
> +         Generator available in Exynos SoCs.
> +

Some whitespace strangness here.

> +	 To compile this driver as a module, choose M here: the module
> +	 will be called exynos-trng.
> +
> +	 If unsure, say Y.
>  endif # HW_RANDOM
>  
>  config UML_RANDOM
> diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> index f3728d008fff..5595df97da7a 100644
> --- a/drivers/char/hw_random/Makefile
> +++ b/drivers/char/hw_random/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_HW_RANDOM_GEODE) += geode-rng.o
>  obj-$(CONFIG_HW_RANDOM_N2RNG) += n2-rng.o
>  n2-rng-y := n2-drv.o n2-asm.o
>  obj-$(CONFIG_HW_RANDOM_VIA) += via-rng.o
> +obj-$(CONFIG_HW_RANDOM_EXYNOS) += exynos-trng.o
>  obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
>  obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
>  obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += omap3-rom-rng.o
> diff --git a/drivers/char/hw_random/exynos-trng.c b/drivers/char/hw_random/exynos-trng.c
> new file mode 100644
> index 000000000000..340e106cae24
> --- /dev/null
> +++ b/drivers/char/hw_random/exynos-trng.c
> @@ -0,0 +1,256 @@
> +/*
> + * RNG driver for Exynos TRNGs
> + *
> + * Author: Łukasz Stelmach <l.stelmach@xxxxxxxxxxx>
> + *
> + * Copyright 2017 (c) Samsung Electronics Software, Inc.
> + *
> + * Based on the Exynos PRNG driver drivers/crypto/exynos-rng by
> + * Krzysztof Kozłowski <krzk@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation;
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/crypto.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/hw_random.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#define EXYNOS_TRNG_CLKDIV         (0x0)
> +#define EXYNOS_TRNG_CTRL           (0x20)
> +#define EXYNOS_TRNG_POST_CTRL      (0x30)
> +#define EXYNOS_TRNG_ONLINE_CTRL    (0x40)
> +#define EXYNOS_TRNG_ONLINE_STAT    (0x44)
> +#define EXYNOS_TRNG_ONLINE_MAXCHI2 (0x48)
> +#define EXYNOS_TRNG_FIFO_CTRL      (0x50)
> +#define EXYNOS_TRNG_FIFO_0         (0x80)
> +#define EXYNOS_TRNG_FIFO_1         (0x84)
> +#define EXYNOS_TRNG_FIFO_2         (0x88)
> +#define EXYNOS_TRNG_FIFO_3         (0x8c)
> +#define EXYNOS_TRNG_FIFO_4         (0x90)
> +#define EXYNOS_TRNG_FIFO_5         (0x94)
> +#define EXYNOS_TRNG_FIFO_6         (0x98)
> +#define EXYNOS_TRNG_FIFO_7         (0x9c)
> +#define EXYNOS_TRNG_FIFO_LEN       (8)
> +#define EXYNOS_TRNG_CLOCK_RATE     (500000)
> +
> +struct exynos_trng_dev {
> +	struct device    *dev;
> +	void __iomem     *mem;
> +	struct clk       *clk;
> +	struct hwrng rng;
> +};
> +
> +struct exynos_trng_dev *exynos_trng_dev;


This only seems to be used as a flag to block this driver from probing
twice, but it doesn't even do that as it is not ever set to anything.
Even if it was, why block a system from having two?

> +
> +static inline void exynos_trng_set_reg(struct exynos_trng_dev *trng, u16 reg,
> +				       u32 val)
> +{
> +	/* Check range of reg? */
> +	__raw_writel(val, trng->mem + reg);

If you are not checking, then just drop this one line function, it adds
nothing.

> +}
> +
> +static inline u32 exynos_trng_get_reg(struct exynos_trng_dev *trng, u16 reg)
> +{
> +	/* Check range of reg? */
> +	return __raw_readl(trng->mem + reg);

Same

> +}
> +
> +static int exynos_trng_do_read(struct hwrng *rng, void *data, size_t max,
> +			       bool wait)
> +{
> +	struct exynos_trng_dev *trng;
> +	u32 val;
> +
> +	max = max > (EXYNOS_TRNG_FIFO_LEN * 4) ?
> +		(EXYNOS_TRNG_FIFO_LEN * 4) : max;

min()

> +
> +	trng = (struct exynos_trng_dev *)rng->priv;
> +
> +	exynos_trng_set_reg(trng, EXYNOS_TRNG_FIFO_CTRL, max * 8);
> +	val = readl_poll_timeout(trng->mem + EXYNOS_TRNG_FIFO_CTRL, val,
> +				 val == 0, 200, 1000000);
> +	if (val < 0)
> +		return val;
> +
> +	memcpy_fromio(data, trng->mem + EXYNOS_TRNG_FIFO_0, max);
> +
> +	return max;
> +}
> +
> +static int exynos_trng_init(struct hwrng *rng)
> +{
> +	struct exynos_trng_dev *trng;
> +	unsigned long sss_rate;
> +	u32 val;
> +
> +	trng = (struct exynos_trng_dev *)rng->priv;

Move up to initializer.

> +	sss_rate = clk_get_rate(trng->clk);
> +
> +	/* For most TRNG circuits the clock frequency of under 500 kHz
> +	 * is safe.
> +	 */
> +	val = sss_rate / (EXYNOS_TRNG_CLOCK_RATE * 2);
> +	if (val > 0x7fff) {
> +		dev_err(trng->dev, "clock divider too large: %d", val);
> +		return -ERANGE;
> +	}
> +	val = val << 1;
> +	exynos_trng_set_reg(trng, EXYNOS_TRNG_CLKDIV, val);
> +
> +	/* Enable the generator. */
> +	val = 1 << 31;

#define TRNG_CTRL_ENABLE BIT(31)

> +	exynos_trng_set_reg(trng, EXYNOS_TRNG_CTRL, val);
> +
> +	/* Disable post processing. /dev/hwrng is supposed to deliver
> +	 * unprocessed data.
> +	 */
> +	exynos_trng_set_reg(trng, EXYNOS_TRNG_POST_CTRL, 0);
> +
> +	return 0;
> +}
> +
> +static int exynos_trng_probe(struct platform_device *pdev)
> +{
> +	struct exynos_trng_dev *trng;
> +	struct resource *res;
> +	int ret = -ENOMEM;
> +
> +	if (exynos_trng_dev)
> +		return -EEXIST;
> +
> +	trng = devm_kzalloc(&pdev->dev, sizeof(*trng), GFP_KERNEL);
> +	if (!trng)
> +		goto err_ioremap;
> +
> +	trng->rng.name = devm_kstrdup(&pdev->dev, dev_name(&pdev->dev),
> +				      GFP_KERNEL);
> +	if (!trng->rng.name)
> +		goto err_ioremap;
> +
> +	trng->rng.init = exynos_trng_init;
> +	trng->rng.read = exynos_trng_do_read;
> +	trng->rng.priv = (unsigned long) trng;
> +
> +	platform_set_drvdata(pdev, trng);
> +	trng->dev = &pdev->dev;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	trng->mem = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(trng->mem)) {
> +		dev_err(&pdev->dev, "Couldn't map IO resources.\n");
> +		ret = PTR_ERR(trng->mem);
> +		goto err_ioremap;
> +	}
> +
> +	pm_runtime_enable(&pdev->dev);
> +	ret = pm_runtime_get_sync(&pdev->dev);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "pm_runtime_get_sync() failed: %d.\n", ret);

"Could not get runtime PM",

Be descriptive an consistent, the other dev_errs don't print ret, it
will get printed as part of the probe fail message.

> +		goto err_ioremap;
> +	}
> +
> +	trng->clk = devm_clk_get(&pdev->dev, "secss");
> +	if (IS_ERR(trng->clk)) {
> +		/* XXX: EPROBE_DEFER ? */

Are you asking? If it's posible the clock is not available then yes, you
should not print the below message and exit gracefully.

> +		dev_err(&pdev->dev, "Couldn't get clock.\n");
> +		ret = PTR_ERR(trng->clk);
> +		goto err_clock;
> +	}
> +
> +	ret = clk_prepare_enable(trng->clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to enable the clk: %d.\n", ret);
> +		goto err_clock;
> +	}
> +
> +	ret = hwrng_register(&trng->rng);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Couldn't register hwrng device.\n");
> +		goto err_register;
> +	}
> +
> +	dev_info(&pdev->dev, "Exynos True Random Number Generator.\n");
> +
> +	return 0;
> +
> +err_register:
> +	clk_disable_unprepare(trng->clk);
> +
> +err_clock:
> +	trng->mem = NULL;
> +	pm_runtime_put_sync(&pdev->dev);
> +	pm_runtime_disable(&pdev->dev);
> +
> +err_ioremap:
> +	dev_err(&pdev->dev, "Initialisation failed.\n");
> +	return ret;
> +}
> +
> +static int exynos_trng_remove(struct platform_device *pdev)
> +{

pm_runtime_*, or just use devm_ versions and drop this function.

> +	exynos_trng_dev = NULL;
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused exynos_trng_suspend(struct device *dev)
> +{
> +	pm_runtime_put_sync(dev);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused exynos_trng_resume(struct device *dev)
> +{
> +	int ret;
> +
> +	ret = pm_runtime_get_sync(dev);
> +	if (ret < 0) {
> +		dev_err(dev, "pm_runtime_get_sync() failed: %d.\n", ret);
> +		pm_runtime_put_noidle(dev);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(exynos_trng_pm_ops, exynos_trng_suspend,
> +			 exynos_trng_resume);
> +
> +static const struct of_device_id exynos_trng_dt_match[] = {
> +	{
> +		.compatible = "samsung,exynos5250-trng",
> +	},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, exynos_rng_dt_match);
> +
> +static struct platform_driver exynos_trng_driver = {
> +	.driver = {
> +		.name = "exynos-trng",
> +		.pm = &exynos_trng_pm_ops,
> +		.of_match_table = exynos_trng_dt_match,
> +	},
> +	.probe = exynos_trng_probe,
> +	.remove = exynos_trng_remove,
> +};
> +
> +module_platform_driver(exynos_trng_driver);
> +MODULE_AUTHOR("Łukasz Stelmach");
> +MODULE_DESCRIPTION("H/W TRNG driver for Exynos chips");
> +MODULE_LICENSE("GPL");
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux