Re: [PATCH] ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Nov 20, 2017 at 11:30:49AM +0100, Arnd Bergmann wrote:
> On Mon, Nov 20, 2017 at 11:26 AM, Simon Horman <horms@xxxxxxxxxxxx> wrote:
> > On Mon, Nov 20, 2017 at 10:57:07AM +0100, Geert Uytterhoeven wrote:
> >> Hi Simon,
> >>
> >> On Mon, Nov 20, 2017 at 10:49 AM, Simon Horman <horms@xxxxxxxxxxxx> wrote:
> >> > On Thu, Nov 16, 2017 at 02:35:57PM +0100, Geert Uytterhoeven wrote:
> >> >> From: Arnd Bergmann <arnd@xxxxxxxx>
> >> >>
> >> >> With the latest dtc, we get many warnings about the missing
> >> >> '#reset-cells' property in these controllers, e.g.:
> >> >>
> >> >> arch/arm/boot/dts/r8a7790-lager.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /can@e6e80000:resets[0])
> >> >> arch/arm/boot/dts/r8a7792-blanche.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/dma-controller@e6700000:resets[0])
> >> >> arch/arm/boot/dts/r8a7792-wheat.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/ethernet@e6800000:resets[0])
> >> >> arch/arm/boot/dts/r8a7793-gose.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /gpio@e6050000:resets[0])
> >> >> arch/arm/boot/dts/r8a7794-alt.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /i2c@e6500000:resets[0])
> >> >> arch/arm/boot/dts/r8a7794-silk.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /interrupt-controller@e61c0000:resets[0])
> >> >>
> >> >> This adds it for the three r8a779x chips that were lacking it. The
> >> >> binding mandates this as <1>, so this is the value I use.
> >> >>
> >> >> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> >> >> [geert: Add fix for r8a7793.dtsi]
> >> >> Fixes: 34fbd2b12761d111 ("ARM: dts: r8a7790: Add reset control properties")
> >> >> Fixes: 6e11a322f1d7505d ("ARM: dts: r8a7792: Add reset control properties")
> >> >> Fixes: 84fb19e1d201ba86 ("ARM: dts: r8a7793: Add reset control properties")
> >> >> Fixes: 615beb759ca494a4 ("ARM: dts: r8a7794: Add reset control properties")
> >> >> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> >> >
> >> > Thanks for following up on this, its been fouling up my todo list for a
> >> > while now. Applied for v4.16.
> >>
> >> As this is a fix for changes made in v4.15-rc1, don't we want it in v4.15?
> >
> > Do the changes have any run-time effect?
> > If not I'd prefer not to push them into v4.15 as fixes.
> 
> The main effect right now is that we're up from no warnings in the
> default build to
> hundreds of warnings, which is really annoying. Obviously there is
> little gain in
> fixing these but not the other warnings that were introduced, but I would either
> want to fix them all, or disable the warning for one more release.
> 
> Rob, what do you think we should do here?

Ok, I'll queued these up as fixes for v4.15 as it seems to move things
in your desired direction.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux