On Thu, 26 Oct 2017 18:47:50 +0100
Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> On Wed, 25 Oct 2017 11:27:45 +0200
> Fabrice Gasnier <fabrice.gasnier@xxxxxx> wrote:
>
> > STM32H7 ADC channels can be configured either as single ended or
> > differential with 'st,adc-channels' or 'st,adc-diff-channels'
> > (positive and negative input pair: <vinp vinn>, ...).
> >
> > Differential channels have different offset and scale, from spec:
> > raw value = (full_scale / 2) * (1 + (vinp - vinn) / vref).
> > Add offset attribute.
> >
> > Differential channels are selected by DIFSEL register. Negative
> > inputs must be added to pre-selected channels as well (PCSEL).
> >
> > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
>
> Looks good. Again, DT review needed before I take the whole series.
>
> Jonathan
>
Applied to the togreg branch of iio.git and pushed out as
testing for the autobuilders to play with it.
Thanks,
Jonathan
> > ---
> > Changes in v2:
> > - Improve val & val2 variable names in stm32_adc_chan_init_one()
> > definition as suggested by Jonathan.
> > ---
> > drivers/iio/adc/stm32-adc.c | 123 +++++++++++++++++++++++++++++++++++++-------
> > 1 file changed, 103 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> > index 417a894..fd50067 100644
> > --- a/drivers/iio/adc/stm32-adc.c
> > +++ b/drivers/iio/adc/stm32-adc.c
> > @@ -92,6 +92,7 @@
> > #define STM32H7_ADC_SQR3 0x38
> > #define STM32H7_ADC_SQR4 0x3C
> > #define STM32H7_ADC_DR 0x40
> > +#define STM32H7_ADC_DIFSEL 0xC0
> > #define STM32H7_ADC_CALFACT 0xC4
> > #define STM32H7_ADC_CALFACT2 0xC8
> >
> > @@ -154,7 +155,7 @@ enum stm32h7_adc_dmngt {
> > #define STM32H7_BOOST_CLKRATE 20000000UL
> >
> > #define STM32_ADC_CH_MAX 20 /* max number of channels */
> > -#define STM32_ADC_CH_SZ 5 /* max channel name size */
> > +#define STM32_ADC_CH_SZ 10 /* max channel name size */
> > #define STM32_ADC_MAX_SQ 16 /* SQ1..SQ16 */
> > #define STM32_ADC_MAX_SMP 7 /* SMPx range is [0..7] */
> > #define STM32_ADC_TIMEOUT_US 100000
> > @@ -299,6 +300,7 @@ struct stm32_adc_cfg {
> > * @rx_buf: dma rx buffer cpu address
> > * @rx_dma_buf: dma rx buffer bus address
> > * @rx_buf_sz: dma rx buffer size
> > + * @difsel bitmask to set single-ended/differential channel
> > * @pcsel bitmask to preselect channels on some devices
> > * @smpr_val: sampling time settings (e.g. smpr1 / smpr2)
> > * @cal: optional calibration data on some devices
> > @@ -321,12 +323,18 @@ struct stm32_adc {
> > u8 *rx_buf;
> > dma_addr_t rx_dma_buf;
> > unsigned int rx_buf_sz;
> > + u32 difsel;
> > u32 pcsel;
> > u32 smpr_val[2];
> > struct stm32_adc_calib cal;
> > char chan_name[STM32_ADC_CH_MAX][STM32_ADC_CH_SZ];
> > };
> >
> > +struct stm32_adc_diff_channel {
> > + u32 vinp;
> > + u32 vinn;
> > +};
> > +
> > /**
> > * struct stm32_adc_info - stm32 ADC, per instance config data
> > * @max_channels: Number of channels
> > @@ -944,15 +952,19 @@ static int stm32h7_adc_selfcalib(struct stm32_adc *adc)
> > * stm32h7_adc_prepare() - Leave power down mode to enable ADC.
> > * @adc: stm32 adc instance
> > * Leave power down mode.
> > + * Configure channels as single ended or differential before enabling ADC.
> > * Enable ADC.
> > * Restore calibration data.
> > - * Pre-select channels that may be used in PCSEL (required by input MUX / IO).
> > + * Pre-select channels that may be used in PCSEL (required by input MUX / IO):
> > + * - Only one input is selected for single ended (e.g. 'vinp')
> > + * - Two inputs are selected for differential channels (e.g. 'vinp' & 'vinn')
> > */
> > static int stm32h7_adc_prepare(struct stm32_adc *adc)
> > {
> > int ret;
> >
> > stm32h7_adc_exit_pwr_down(adc);
> > + stm32_adc_writel(adc, STM32H7_ADC_DIFSEL, adc->difsel);
> >
> > ret = stm32h7_adc_enable(adc);
> > if (ret)
> > @@ -1224,10 +1236,23 @@ static int stm32_adc_read_raw(struct iio_dev *indio_dev,
> > return ret;
> >
> > case IIO_CHAN_INFO_SCALE:
> > - *val = adc->common->vref_mv;
> > - *val2 = chan->scan_type.realbits;
> > + if (chan->differential) {
> > + *val = adc->common->vref_mv * 2;
> > + *val2 = chan->scan_type.realbits;
> > + } else {
> > + *val = adc->common->vref_mv;
> > + *val2 = chan->scan_type.realbits;
> > + }
> > return IIO_VAL_FRACTIONAL_LOG2;
> >
> > + case IIO_CHAN_INFO_OFFSET:
> > + if (chan->differential)
> > + /* ADC_full_scale / 2 */
> > + *val = -((1 << chan->scan_type.realbits) / 2);
> > + else
> > + *val = 0;
> > + return IIO_VAL_INT;
> > +
> > default:
> > return -EINVAL;
> > }
> > @@ -1591,29 +1616,39 @@ static void stm32_adc_smpr_init(struct stm32_adc *adc, int channel, u32 smp_ns)
> >
> > static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
> > struct iio_chan_spec *chan, u32 vinp,
> > - int scan_index, u32 smp)
> > + u32 vinn, int scan_index, bool differential)
> > {
> > struct stm32_adc *adc = iio_priv(indio_dev);
> > char *name = adc->chan_name[vinp];
> >
> > chan->type = IIO_VOLTAGE;
> > chan->channel = vinp;
> > - snprintf(name, STM32_ADC_CH_SZ, "in%d", vinp);
> > + if (differential) {
> > + chan->differential = 1;
> > + chan->channel2 = vinn;
> > + snprintf(name, STM32_ADC_CH_SZ, "in%d-in%d", vinp, vinn);
> > + } else {
> > + snprintf(name, STM32_ADC_CH_SZ, "in%d", vinp);
> > + }
> > chan->datasheet_name = name;
> > chan->scan_index = scan_index;
> > chan->indexed = 1;
> > chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
> > - chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
> > + chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
> > + BIT(IIO_CHAN_INFO_OFFSET);
> > chan->scan_type.sign = 'u';
> > chan->scan_type.realbits = adc->cfg->adc_info->resolutions[adc->res];
> > chan->scan_type.storagebits = 16;
> > chan->ext_info = stm32_adc_ext_info;
> >
> > - /* Prepare sampling time settings */
> > - stm32_adc_smpr_init(adc, chan->channel, smp);
> > -
> > /* pre-build selected channels mask */
> > adc->pcsel |= BIT(chan->channel);
> > + if (differential) {
> > + /* pre-build diff channels mask */
> > + adc->difsel |= BIT(chan->channel);
> > + /* Also add negative input to pre-selected channels */
> > + adc->pcsel |= BIT(chan->channel2);
> > + }
> > }
> >
> > static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
> > @@ -1621,17 +1656,40 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
> > struct device_node *node = indio_dev->dev.of_node;
> > struct stm32_adc *adc = iio_priv(indio_dev);
> > const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
> > + struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX];
> > struct property *prop;
> > const __be32 *cur;
> > struct iio_chan_spec *channels;
> > - int scan_index = 0, num_channels, ret;
> > + int scan_index = 0, num_channels = 0, num_diff = 0, ret, i;
> > u32 val, smp = 0;
> >
> > - num_channels = of_property_count_u32_elems(node, "st,adc-channels");
> > - if (num_channels < 0 ||
> > - num_channels > adc_info->max_channels) {
> > + ret = of_property_count_u32_elems(node, "st,adc-channels");
> > + if (ret > adc_info->max_channels) {
> > dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
> > - return num_channels < 0 ? num_channels : -EINVAL;
> > + return -EINVAL;
> > + } else if (ret > 0) {
> > + num_channels += ret;
> > + }
> > +
> > + ret = of_property_count_elems_of_size(node, "st,adc-diff-channels",
> > + sizeof(*diff));
> > + if (ret > adc_info->max_channels) {
> > + dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
> > + return -EINVAL;
> > + } else if (ret > 0) {
> > + int size = ret * sizeof(*diff) / sizeof(u32);
> > +
> > + num_diff = ret;
> > + num_channels += ret;
> > + ret = of_property_read_u32_array(node, "st,adc-diff-channels",
> > + (u32 *)diff, size);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + if (!num_channels) {
> > + dev_err(&indio_dev->dev, "No channels configured\n");
> > + return -ENODATA;
> > }
> >
> > /* Optional sample time is provided either for each, or all channels */
> > @@ -1652,6 +1710,33 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
> > return -EINVAL;
> > }
> >
> > + /* Channel can't be configured both as single-ended & diff */
> > + for (i = 0; i < num_diff; i++) {
> > + if (val == diff[i].vinp) {
> > + dev_err(&indio_dev->dev,
> > + "channel %d miss-configured\n", val);
> > + return -EINVAL;
> > + }
> > + }
> > + stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
> > + 0, scan_index, false);
> > + scan_index++;
> > + }
> > +
> > + for (i = 0; i < num_diff; i++) {
> > + if (diff[i].vinp >= adc_info->max_channels ||
> > + diff[i].vinn >= adc_info->max_channels) {
> > + dev_err(&indio_dev->dev, "Invalid channel in%d-in%d\n",
> > + diff[i].vinp, diff[i].vinn);
> > + return -EINVAL;
> > + }
> > + stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
> > + diff[i].vinp, diff[i].vinn, scan_index,
> > + true);
> > + scan_index++;
> > + }
> > +
> > + for (i = 0; i < scan_index; i++) {
> > /*
> > * Using of_property_read_u32_index(), smp value will only be
> > * modified if valid u32 value can be decoded. This allows to
> > @@ -1659,11 +1744,9 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
> > * value per channel.
> > */
> > of_property_read_u32_index(node, "st,min-sample-time-nsecs",
> > - scan_index, &smp);
> > -
> > - stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
> > - val, scan_index, smp);
> > - scan_index++;
> > + i, &smp);
> > + /* Prepare sampling time settings */
> > + stm32_adc_smpr_init(adc, channels[i].channel, smp);
> > }
> >
> > indio_dev->num_channels = scan_index;
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
