Switch to the stable UART bindings and add the correct gate clocks
to the non-AO UART nodes.
This fixes the non-AO UARTs if the bootloader didn't un-gate the clocks.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Acked-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
arch/arm/boot/dts/meson8b.dtsi | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index d75e0ceda8bb..db296e5bd88a 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -248,19 +248,27 @@
};
&uart_AO {
- clocks = <&clkc CLKID_CLK81>;
+ compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+ clock-names = "baud", "xtal", "pclk";
};
&uart_A {
- clocks = <&clkc CLKID_CLK81>;
+ compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
+ clock-names = "baud", "xtal", "pclk";
};
&uart_B {
- clocks = <&clkc CLKID_CLK81>;
+ compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
+ clock-names = "baud", "xtal", "pclk";
};
&uart_C {
- clocks = <&clkc CLKID_CLK81>;
+ compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
+ clock-names = "baud", "xtal", "pclk";
};
&usb0 {
--
2.15.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
