The Realtek RTL8723BS and RTL8723DS chipsets are SDIO wifi chips. They
also contain a Bluetooth module which is connected via UART to the host.
Realtek's userspace initialization tool (rtk_hciattach) differentiates
these two via the HCI version and revision returned by the
HCI_OP_READ_LOCAL_VERSION command.
Additionally we apply these checks only the for UART devices. Everything
else is assumed to be a "RTL8723B" which was originally supported by the
driver (communicating via USB).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
drivers/bluetooth/btrtl.c | 32 ++++++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 45b872f5ad22..d896f9421250 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -418,9 +418,33 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev)
has_rom_version = false;
break;
case RTL_ROM_LMP_8723B:
- fw_name = "rtl_bt/rtl8723b_fw.bin";
- cfg_name = "rtl_bt/rtl8723b_config.bin";
+ /* all variants support reading the ROM version */
has_rom_version = true;
+
+ /*
+ * RTL8723 devices exist in different variants:
+ * - RTL8723BS (SDIO chip with UART Bluetooth)
+ * - RTL8723DS (SDIO chip with UART Bluetooth)
+ * - for backwards-compatibility everything else is assumed to
+ * be an RTL8723B communicating over USB
+ *
+ * Only UART devices really need the config because that
+ * contains the UART speed / flow control settings.
+ */
+ if (hdev->bus == HCI_UART && resp->hci_ver == 6 &&
+ le16_to_cpu(resp->hci_rev) == 0xb) {
+ fw_name = "rtl_bt/rtl8723bs_fw.bin";
+ cfg_name = "rtl_bt/rtl8723bs_config.bin";
+ cfg_needed = true;
+ } else if (hdev->bus == HCI_UART && resp->hci_ver == 8 &&
+ le16_to_cpu(resp->hci_rev) == 0xd) {
+ fw_name = "rtl_bt/rtl8723ds_fw.bin";
+ cfg_name = "rtl_bt/rtl872ds_config.bin";
+ cfg_needed = true;
+ } else {
+ fw_name = "rtl_bt/rtl8723b_fw.bin";
+ cfg_name = "rtl_bt/rtl8723b_config.bin";
+ }
break;
case RTL_ROM_LMP_8821A:
fw_name = "rtl_bt/rtl8821a_fw.bin";
@@ -641,6 +665,10 @@ MODULE_LICENSE("GPL");
MODULE_FIRMWARE("rtl_bt/rtl8723a_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761a_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin");
--
2.15.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
