On Fri, Nov 17, 2017 at 11:24:03AM +0100, Lukasz Majewski wrote:
> This is the support for aa070mc01-ca1 Mitsubishi display.
>
> Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> .../imx6q-display5-mitsubishi-aa070-800x480.dts | 51 ++++++++++++++++++++++
> 2 files changed, 52 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6q-display5-mitsubishi-aa070-800x480.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d9d0c82e7d20..10b3ad078dea 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -407,6 +407,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6q-cm-fx6.dtb \
> imx6q-cubox-i.dtb \
> imx6q-dfi-fs700-m60.dtb \
> + imx6q-display5-mitsubishi-aa070-800x480.dtb \
> imx6q-display5-tianma-tm070-1280x768.dtb \
> imx6q-dmo-edmqmx6.dtb \
> imx6q-evi.dtb \
<snip>
> +#include "imx6q-display5.dtsi"
> +
> +&panel {
> + compatible = "mitsubishi,aa070mc01-ca1";
> +};
How many DTB files do you want to add for this display5 board? It's
obvious no fun to maintain a bunch of DTB files for all the panels this
board can support. Let's stop right here.
Shawn
> +
> +&ldb {
> + lvds0: lvds-channel@0 {
> + fsl,data-mapping = "spwg";
> + fsl,data-width = <24>;
> + };
> +};
> --
> 2.11.0
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
