[PATCH v2 2/3] dt: Document ModelGauge gauge bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




These bindings can be used to register Maxim ModelGauge ICs fuel gauge
(MAX17040/41/43/44/48/49/58/59)

Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>

---
 Documentation/devicetree/bindings/power_supply/modelgauge_battery.txt |   61 ++++++++++
 1 file changed, 61 insertions(+)

Index: battery-2.6/Documentation/devicetree/bindings/power_supply/modelgauge_battery.txt
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ battery-2.6/Documentation/devicetree/bindings/power_supply/modelgauge_battery.txt	2014-02-02 01:36:12.638624341 +0400
@@ -0,0 +1,61 @@
+modelgauge_battery
+~~~~~~~~~~~~~~~~~~
+
+Required properties:
+ - compatible		: should contain one of the following:
+			  - "maxim,max17040" for MAX17040
+			  - "maxim,max17041" for MAX17041
+			  - "maxim,max17043" for MAX17043
+			  - "maxim,max17044" for MAX17044
+			  - "maxim,max17048" for MAX17048
+			  - "maxim,max17049" for MAX17049
+			  - "maxim,max17058" for MAX17058
+			  - "maxim,max17059" for MAX17059
+
+Optional properties:
+ - maxim,rcomp0			: ModelGauge RCOMP parameter, used for
+				  temperature compensation (u8);
+ - maxim,temp-co-up		: ModelGauge TempCoUp parameter, used for
+				  temperature compensation (signed);
+ - maxim,temp-co-down		: ModelGauge TempCoDown parameter, used for
+				  temperature compensation (signed);
+ - maxim,ocvtest		: ModelGauge OCVTest parameter, used for
+				  verification of Custom Model calibration data
+				  loaded into IC RAM (u16);
+ - maxim,soc-check-a		: ModelGauge SOCCheckA parameter, used for
+				  verification of Custom Model calibration data
+				  loaded into IC RAM (u8);
+ - maxim,soc-check-b		: ModelGauge SOCCheckB parameter, used for
+				  verification of Custom Model calibration data
+				  loaded into IC RAM (u8);
+ - maxim,bits			: ModelGauge Bits parameter, used as
+				  scaling parameter in Custom Model algorithm (u8);
+ - maxim,model-data		: ModelGauge ModelData data,
+				  Custom Model calibration data (array_u8[64]).
+
+Example:
+
+modelgauge@36 {
+	compatible = "maxim,max17058";
+	reg = <0x36>;
+	interrupt-parent = <&msmgpio>;
+	interrupts = <107 0x2>;
+
+	maxim,rcomp0 = /bits/ 8 <175>;
+	maxim,temp-co-up = <(-1100)>;
+	maxim,temp-co-down = <(-4000)>;
+	maxim,ocvtest = /bits/ 16 <56144>;
+	maxim,soc-check-a = /bits/ 8 <241>;
+	maxim,soc-check-b = /bits/ 8 <243>;
+	maxim,bits = /bits/ 8 <19>;
+
+	maxim,model-data = /bits/ 8 <
+		0x9B 0x70 0xAB 0x30 0xB5 0xA0 0xB9 0xD0
+		0xBB 0xA0 0xBC 0x00 0xBC 0xB0 0xBD 0x00
+		0xBD 0x60 0xBE 0x40 0xBF 0x40 0xC1 0xF0
+		0xC5 0x60 0xC8 0xA0 0xCD 0x00 0xD1 0x50
+		0x00 0xE0 0x01 0x80 0x18 0x60 0x1C 0x20
+		0x54 0x00 0x6A 0xC0 0x79 0x20 0x65 0xC0
+		0x0B 0xE0 0x2A 0xC0 0x1D 0x00 0x17 0xE0
+		0x15 0xE0 0x11 0xE0 0x11 0x00 0x11 0x00>;
+};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux