On Wed, Nov 15, 2017 at 10:31:14AM -0800, Tim Harvey wrote: > On Wed, Nov 15, 2017 at 7:52 AM, Rob Herring <robh@xxxxxxxxxx> wrote: > > On Thu, Nov 09, 2017 at 10:45:34AM -0800, Tim Harvey wrote: > >> Add support for the TDA1997x HDMI receivers. > >> > >> Cc: Hans Verkuil <hverkuil@xxxxxxxxx> > >> Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> > >> --- > >> v3: > >> - use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros > >> - fixed missing break > >> - use only hdmi_infoframe_log for infoframe logging > >> - simplify tda1997x_s_stream error handling > >> - add delayed work proc to handle hotplug enable/disable > >> - fix set_edid (disable HPD before writing, enable after) > >> - remove enabling edid by default > >> - initialize timings > >> - take quant range into account in colorspace conversion > >> - remove vendor/product tracking (we provide this in log_status via infoframes) > >> - add v4l_controls > >> - add more detail to log_status > >> - calculate vhref generator timings > >> - timing detection fixes (rounding errors, hswidth errors) > >> - rename configure_input/configure_conv functions > >> > >> v2: > >> - implement dv timings enum/cap > >> - remove deprecated g_mbus_config op > >> - fix dv_query_timings > >> - add EDID get/set handling > >> - remove max-pixel-rate support > >> - add audio codec DAI support > >> - change audio bindings > >> --- > >> drivers/media/i2c/Kconfig | 9 + > >> drivers/media/i2c/Makefile | 1 + > >> drivers/media/i2c/tda1997x.c | 3485 ++++++++++++++++++++++++++++++++++ > >> include/dt-bindings/media/tda1997x.h | 78 + > > > > This belongs with the binding documentation patch. > > > > Rob, > > Thanks - missed that. I will move it for v4. > > Regarding your previous comment to the v2 series: > > The rest of the binding looks fine, but I have some reservations about > > this. I think this should be common probably. There's been a few > > bindings for display recently that deal with the interface format. Maybe > > some vendor property is needed here to map a standard interface format > > back to pin configuration. > > I take it this is not an 'Ack' for the bindings? > > Which did you feel should be made common? I admit I was surprised > there wasn't a common binding for audio bus format (i2s|spdif) but if > you were referring to the video data that would probably be much more > complicated. The video data. Either you have to try to come up with some way to map color components to signals/pins (and even cycles) or you just enumerate the formats and keep adding to them when new ones appear. There's h/w that allows the former, but in the end you have to interoperate, so enumerating the formats is probably enough. > I was hoping one of the media/driver maintainers would respond to your > comment with thoughts as I'm not familiar with a very wide variety of > receivers. I am hoping, too. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
