Hi Hans,
On Wed, Jan 22, 2014 at 08:04:48PM +0100, Hans de Goede wrote:
> From: Oliver Schinagl <oliver@xxxxxxxxxxx>
>
> This patch adds sunxi sata support to A10 boards that have such a connector.
> Some boards also feature a regulator via a GPIO and support for this is also
> added.
>
> Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/sun4i-a10-a1000.dts | 4 ++++
> arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 6 +++++
> arch/arm/boot/dts/sun4i-a10.dtsi | 8 +++++++
> arch/arm/boot/dts/sunxi-ahci-reg.dtsi | 38 ++++++++++++++++++++++++++++++
I'm still half convinced about this at the moment, given the number of
platforms we support, we can always change it back if things become too messy.
> 4 files changed, 56 insertions(+)
> create mode 100644 arch/arm/boot/dts/sunxi-ahci-reg.dtsi
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> index aef8207..3fb7305 100644
> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> @@ -48,6 +48,10 @@
> status = "okay";
> };
>
> + ahci: sata@01c18000 {
> + status = "okay";
> + };
> +
> pinctrl@01c20800 {
> mmc0_cd_pin_a1000: mmc0_cd_pin@0 {
> allwinner,pins = "PH1";
> diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> index f50fb2b..6ae1110 100644
> --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> @@ -12,6 +12,7 @@
>
> /dts-v1/;
> /include/ "sun4i-a10.dtsi"
> +/include/ "sunxi-ahci-reg.dtsi"
>
> / {
> model = "Cubietech Cubieboard";
> @@ -51,6 +52,11 @@
> status = "okay";
> };
>
> + ahci: sata@01c18000 {
> + target-supply = <®_ahci_5v>;
> + status = "okay";
> + };
> +
> pinctrl@01c20800 {
> mmc0_cd_pin_cubieboard: mmc0_cd_pin@0 {
> allwinner,pins = "PH1";
> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> index 4736dd2..198dcda 100644
> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> @@ -331,6 +331,14 @@
> status = "disabled";
> };
>
> + ahci: sata@01c18000 {
> + compatible = "allwinner,sun4i-a10-ahci";
To be consistent with the rest of the sun4i devices compatible, It
should be sun4i-ahci.
However, since these devices don't use the same compatible pattern as
their own machine compatible, and are consisent with the rest of the
compatibles for the other SoCs, we can probably make this a go to
transition progressively to this pattern.
I'll cook up some patches for the other devices.
> + reg = <0x01c18000 0x1000>;
> + interrupts = <56>;
> + clocks = <&pll6 0>, <&ahb_gates 25>;
> + status = "disabled";
> + };
> +
> intc: interrupt-controller@01c20400 {
> compatible = "allwinner,sun4i-ic";
> reg = <0x01c20400 0x400>;
> diff --git a/arch/arm/boot/dts/sunxi-ahci-reg.dtsi b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi
> new file mode 100644
> index 0000000..955b197
> --- /dev/null
> +++ b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi
> @@ -0,0 +1,38 @@
> +/*
> + * sunxi boards sata target power supply common code
> + *
> + * Copyright 2014 - Hans de Goede <hdegoede@xxxxxxxxxx>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/ {
> + soc@01c00000 {
> + ahci_pwr_pin_a: ahci_pwr_pin@0 {
> + allwinner,pins = "PB8";
> + allwinner,function = "gpio_out";
> + allwinner,drive = <0>;
> + allwinner,pull = <0>;
> + };
This should be under the pinctrl node.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Attachment:
signature.asc
Description: Digital signature
