Added property for DMA configuration of the device.
Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
---
Changes in v3:
None, but we discussed on the ML about whether we should have "dma-names"
present in the binding even if it's only one.
The helpers in the kernel to retrieve the channel info rely on the
presence of this property, so I am resending the patch based on this.
If another solution is better, please advise and I can try it and
resend the patch.
Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
index 552e7a8..6469a4c 100644
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -17,6 +17,11 @@ Required properties:
This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING ,
IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH
+Optional properties:
+ - dmas: Phandle to dma channel for the ADC.
+ - dma-names: Must be "rx" when dmas property is being used.
+ See ../../dma/dma.txt for details.
+
Example:
adc: adc@fc030000 {
@@ -31,4 +36,6 @@ adc: adc@fc030000 {
vddana-supply = <&vdd_3v3_lp_reg>;
vref-supply = <&vdd_3v3_lp_reg>;
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+ dma-names = "rx";
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
