Re: [PATCH v9 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Geert,

Thanks for your feedback.

On 2017-11-10 09:09:39 +0100, Geert Uytterhoeven wrote:
> Hi Niklas,
> 
> On Fri, Nov 10, 2017 at 12:43 AM, Niklas Söderlund
> <niklas.soderlund+renesas@xxxxxxxxxxxx> wrote:
> > Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers
> > are located between the video sources (CSI-2 transmitters) and the video
> > grabbers (VIN) on Gen3 of Renesas R-Car SoC.
> >
> > Each CSI-2 device is connected to more then one VIN device which
> > simultaneously can receive video from the same CSI-2 device. Each VIN
> > device can also be connected to more then one CSI-2 device. The routing
> > of which link are used are controlled by the VIN devices. There are only
> > a few possible routes which are set by hardware limitations, which are
> > different for each SoC in the Gen3 family.
> >
> > To work with the limitations of routing possibilities it is necessary
> > for the DT bindings to describe which VIN device is connected to which
> > CSI-2 device. This is why port 1 needs to to assign reg numbers for each
> > VIN device that be connected to it. To setup and to know which links are
> > valid for each SoC is the responsibility of the VIN driver since the
> > register to configure it belongs to the VIN hardware.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/media/rcar-csi2.txt        | 103 +++++++++++++++++++++
> >  MAINTAINERS                                        |   1 +
> >  2 files changed, 104 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/rcar-csi2.txt
> >
> > diff --git a/Documentation/devicetree/bindings/media/rcar-csi2.txt b/Documentation/devicetree/bindings/media/rcar-csi2.txt
> > new file mode 100644
> > index 0000000000000000..39d41d82b71b60eb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/rcar-csi2.txt
> 
> > +Example:
> > +
> > +       csi20: csi2@fea80000 {
> > +               compatible = "renesas,r8a7796-csi2", "renesas,rcar-gen3-csi2";
> > +               reg = <0 0xfea80000 0 0x10000>;
> > +               interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
> > +               clocks = <&cpg CPG_MOD 714>;
> > +               power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> 
> resets?
> 
> I know this is just an example, but your prototype patches to add the
> csi nodes to r8a7795.dtsi also don't have reset properties.

Thanks for catching this, I had updated the DT series but forgot the 
example.

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds

-- 
Regards,
Niklas Söderlund
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux