Hi Patrice,
On 30/01/14 14:55, Patrice CHOTARD wrote:
> From: Alexandre TORGUE <alexandre.torgue@xxxxxx>
>
> The STid127 integrates all harware components to function as a cable modem
s/harware/hardware/
s/STid127/STiD127
Please fix other instances too.
> or, in combination with a back end device, as a Gateway set top boxe.
s/boxe/box/
>
> Supported devices:
> -UART0
> -UART2
>
> Signed-off-by: alexandre torgue <alexandre.torgue@xxxxxx>
> ---
> arch/arm/boot/dts/stid127-clock.dtsi | 31 ++++
> arch/arm/boot/dts/stid127-pinctrl.dtsi | 245 ++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/stid127.dtsi | 130 +++++++++++++++++
> 3 files changed, 406 insertions(+)
> create mode 100644 arch/arm/boot/dts/stid127-clock.dtsi
> create mode 100644 arch/arm/boot/dts/stid127-pinctrl.dtsi
> create mode 100644 arch/arm/boot/dts/stid127.dtsi
>
> diff --git a/arch/arm/boot/dts/stid127-clock.dtsi b/arch/arm/boot/dts/stid127-clock.dtsi
> new file mode 100644
> index 0000000..c6cafa9
> --- /dev/null
> +++ b/arch/arm/boot/dts/stid127-clock.dtsi
> @@ -0,0 +1,31 @@
> +/*
> + * Copyright (C) 2013 STMicroelectronics (R&D) Limited
2014
> + * Author(s): Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
> + * Alexandre Torgue <alexandre.torgue@xxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/ {Acked-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
> + clocks {
> + /*
> + * ARM Peripheral clock for timers
> + */
> + arm_periph_clk: arm_periph_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <100000000>;
> + };
> + /*
> + * Bootloader initialized system infrastructure clock for
> + * serial devices.
> + */
> + CLK_IC_LP_HD: clockgenA0@29 {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <100000000>;
> + clock-output-names = "CLK_IC_LP_HD";
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/stid127-pinctrl.dtsi b/arch/arm/boot/dts/stid127-pinctrl.dtsi
> new file mode 100644
> index 0000000..3fa66f3
> --- /dev/null
> +++ b/arch/arm/boot/dts/stid127-pinctrl.dtsi
> @@ -0,0 +1,245 @@
> +/*
> + * Copyright (C) 2012 STMicroelectronics Limited.
2014
> + * Author(s): Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
> + * Alexandre Torgue <alexandre.torgue@xxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * publishhed by the Free Software Foundation.
s/publishhed/published/
> + */
> +#include "st-pincfg.h"
> +/ {
> + aliases {
> + gpio0 = &PIO0;
> + gpio1 = &PIO1;
> + gpio2 = &PIO2;
> + gpio3 = &PIO3;
> + gpio4 = &PIO4;
> + gpio5 = &PIO5;
> + gpio6 = &PIO6;
> + gpio7 = &PIO7;
> + gpio8 = &PIO8;
> + gpio9 = &PIO9;
> + gpio10 = &PIO10;
> + gpio11 = &PIO11;
> + gpio12 = &PIO12;
> + gpio13 = &PIO13;
> + gpio14 = &PIO14;
> + gpio15 = &PIO15;
> + gpio16 = &PIO16;
> + gpio17 = &PIO17;
> + gpio18 = &PIO18;
> + gpio19 = &PIO19;
> + gpio20 = &PIO20;
> + gpio21 = &PIO21;
> + gpio22 = &PIO22;
> +
> + };
> +
> + soc {
> + pin-controller-pwest {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "st,stid127-pwest-pinctrl";
> + st,syscfg = <&syscfg_pwest>;
> + ranges = <0 0xfebe0000 0x8000>;
Can you add interrupt controller support to the pin controller.
Patches are in : https://lkml.org/lkml/2014/1/16/342
All these patches are due to be in v3.15.
> +
> + PIO0: gpio@febe0000 {
> + gpio-controller;
> + #gpio-cells = <1>;
> + reg = <0 0x100>;
> + interrupts = <0 149 0>;
> + st,bank-name = "PIO0";
> + };
> + rx = <&PIO3 0 ALT2 IN>;
> + };
> + };
> + };
> +
> + };
unnecessary empty line here.
> diff --git a/arch/arm/boot/dts/stid127.dtsi b/arch/arm/boot/dts/stid127.dtsi
> new file mode 100644
> index 0000000..a6f0b8fe
> --- /dev/null
> +++ b/arch/arm/boot/dts/stid127.dtsi
> @@ -0,0 +1,130 @@
> +/*
> + * Copyright (C) 2013 STMicroelectronics Limited.
2014
> + * Author(s): Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
> + * Alexandre Torgue <alexandre.torgue@xxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * publishhed by the Free Software Foundation.
s/publishhed/published/
> + */
> +#include "stid127-pinctrl.dtsi"
> +#include "stid127-clock.dtsi"
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg = <0>;
> + };
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + reg = <1>;
> + };
> + };
> +
> + intc: interrupt-controller@fffe1000 {
> + compatible = "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0xfffe1000 0x1000>,
> + <0xfffe0100 0x100>;
> + };
> +
> + scu@fffe0000 {
> + compatible = "arm,cortex-a9-scu";
> + reg = <0xfffe0000 0x1000>;
> + };
> +
> + timer@fffe0200 {
> + interrupt-parent = <&intc>;
> + compatible = "arm,cortex-a9-global-timer";
> + reg = <0xfffe0200 0x100>;
> + interrupts = <1 11 0x04>;
> + clocks = <&arm_periph_clk>;
Fix the tab spacing here.
Thanks,
srini
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
