CAN1 interface is exposed via connector J3 found on the camera daughter
board. This patch enables can1 DT node from within the daughter board
specific dtsi.
Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Reviewed-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
index 4db18f2..476273b 100644
--- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
@@ -32,6 +32,13 @@
};
};
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
@@ -94,6 +101,11 @@
};
&pfc {
+ can1_pins: can1 {
+ groups = "can1_data_d";
+ function = "can1";
+ };
+
du_pins: du {
groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
function = "du";
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
