On 22/10/17 09:26, Corentin Labbe wrote: > On Thu, Oct 19, 2017 at 05:10:30PM +0200, Fabien Dessenne wrote: >> This module registers block cipher algorithms that make use of the >> STMicroelectronics STM32 crypto "CRYP1" hardware. >> The following algorithms are supported: >> - aes: ecb, cbc, ctr >> - des: ecb, cbc >> - tdes: ecb, cbc >> >> Signed-off-by: Fabien Dessenne <fabien.dessenne@xxxxxx> >> --- >> drivers/crypto/stm32/Kconfig | 9 + >> drivers/crypto/stm32/Makefile | 3 +- >> drivers/crypto/stm32/stm32-cryp.c | 1172 +++++++++++++++++++++++++++++++++++++ >> 3 files changed, 1183 insertions(+), 1 deletion(-) >> create mode 100644 drivers/crypto/stm32/stm32-cryp.c >> >> diff --git a/drivers/crypto/stm32/Kconfig b/drivers/crypto/stm32/Kconfig >> +static void stm32_cryp_irq_write_block(struct stm32_cryp *cryp) >> +{ >> + unsigned int i, j; >> + u32 *src; >> + u8 d8[4]; >> + >> + src = sg_virt(cryp->in_sg) + _walked_in; >> + >> + for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++) { >> + if (likely(cryp->total_in >= sizeof(u32))) { >> + /* Write a full u32 */ >> + stm32_cryp_write(cryp, CRYP_DIN, *src); > Hello > > Try also to test your driver with userspace via AF_ALG (libkcapi is a good start). > It should probably crash here. > I have do the same on my first sunxi-ss driver and you should use kmap(). > > Regards Hi Corentin, Thank you for suggesting to test from userspace through the AF_ALG socket with libkcapi. This increases my test coverage. I ran the miscellaneous tests (kcapi-enc-test(large).sh + test.sh) and could not observe any crash. Note that I had already fixed some 'memory crashes' while testing with testmgr / tcrypt while testing from the kernel. So it looks like the proposed implementation is fine. BR Fabien��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f