Re: [PATCH 1/1] add mali r6p2 dt node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On Tue, Nov 07, 2017 at 11:03:30AM +0100, Giulio Benetti wrote:
> This patch adds device tree mali node compatible with r6p2 utgard kernel driver 
> provided by ARM and patched by maxime ripard on his github.
> 
> It can be easily used in target.dts with:
> 
> &mali {
> 	status = "okay";
> }
> 
> then loading mali.ko in user space.
> 
> Best regards
> Giulio Benetti
> Micronova srl

Again, you should have a proper commit log here.

Moreover, the DT binding itself doesn't have a dependency on the mali
driver version. This is just a description of the hardware so you
shouldn't mention it.

And there's no need for the status = "okay" in the board DTS, since
you don't disable it in your patch.

> Signed-off-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/sun7i-a20.dtsi | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index 228c368..e402596 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -1216,6 +1216,33 @@
>  			#size-cells = <0>;
>  		};
>  
> +		mali: gpu@1c40000 {
> +			compatible = "allwinner,sun8i-a23-mali",

This doesn't make any sense. The A23 went out later, and...

> +				     "allwinner,sun7i-a20-mali", "arm,mali-400";

You're actually using the proper compatible already.

> +			reg = <0x01c40000 0x10000>;
> +			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "gp",
> +					  "gpmmu",
> +					  "pp0",
> +					  "ppmmu0",
> +					  "pp1",
> +					  "ppmmu1",
> +					  "pmu";
> +			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
> +			clock-names = "bus", "core";
> +			resets = <&ccu RST_GPU>;
> +			#cooling-cells = <2>;

This isn't needed unless you're using thermal throttling, but in this
case you would also need to add the OPPs.

> +
> +			assigned-clocks = <&ccu CLK_GPU>;
> +			assigned-clock-rates = <381000000>;

And this should be in the driver instead.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux