Add a description of the External Interrupt Unit (EXIU) interrupt
controller as found on the Socionext SynQuacer SoC.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
---
Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt | 32 ++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
new file mode 100644
index 000000000000..dc3778b6fbee
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
@@ -0,0 +1,32 @@
+Socionext SynQuacer External Interrupt Unit (EXIU)
+
+The Socionext Synquacer SoC has an external interrupt unit (EXIU)
+that forwards a block of 32 configurable input lines to 32 adjacent
+level-high type GICv3 SPIs.
+
+Required properties:
+
+- compatible : Should be "socionext,synquacer-exiu".
+- reg : Specifies base physical address and size of the
+ control registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 3.
+- interrupt-parent : phandle of the GIC these interrupts are routed to.
+- socionext,spi-base : The SPI number of the first SPI of the 32 adjacent
+ ones the EXIU forwards its interrups to.
+
+Notes:
+
+- Only SPIs can use the EXIU as an interrupt parent.
+
+Example:
+
+ exiu: exiu@510c0000 {
+ compatible = "socionext,synquacer-exiu";
+ reg = <0x0 0x510c0000 0x0 0x20>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <3>;
+ socionext,spi-base = <112>;
+ };
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
