First three patches are improvement and fixes for SPEAr13xx support. Next patch modify phy-core driver for its initialization during subsys_initcall(). Platform ahci driver is modified for phy hooks. Patch#6 and 7 modify/add support for SPEAr13xx SATA and PCIe. These patches are tested with SPEAr1310 evaluation board: - INTEL PRO 100/100 EP card - USB xhci gen2 card - Above cards connected through LeCROY PTC switch Modifications for SATA are tested with SPEAr1340-evb board Changes since v2: - Incorporated comments to move SPEAr13xx PCIe and SATA phy specific routines to the phy framework - Modify ahci driver to include phy hooks - phy-core driver modifications for subsys_initcall() Changes since v1: - Few patches of the series are already accepted and applied to mainline e.g. pcie designware driver improvements,fixes for IO translation bug, PCIe dw driver maintainer. So dropped these from v2. - Incorporated comment to move the common/reset PCIe code to the seperate driver - PCIe and SATA share common PHY configuration registers, so move SATA platform code to the system config driver Fourth patch is improves pcie designware driver and fixes the IO translation bug. IO translation bug fix leads to the working of PCIe EP devices connected to RC through switch. PCIe driver support for SPEAr1310/40 platform board is added. These patches are tested with SPEAr1310 evaluation board: - INTEL PRO 100/100 EP card - USB xhci gen2 card - Above cards connected through LeCROY PTC switch Mohit Kumar (2): SPEAr13xx: defconfig: Update MAINTAINERS: Add ST SPEAr13xx PCIe driver maintainer Pratyush Anand (6): clk: SPEAr13xx: Fix pcie clock name SPEAr13xx: Fix static mapping table phy: Initialize phy core with subsys_initcall ata: ahci platform: Add phy hooks to make it more generic SPEAr13xx: Fixup: Move SPEAr1340 SATA platform code to phy driver pcie: SPEAr13xx: Add designware pcie support Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-ide@xxxxxxxxxxxxxxx Cc: linux-pci@xxxxxxxxxxxxxxx Cc: spear-devel@xxxxxxxxxxx Cc: Tejun Heo <tj@xxxxxxxxxx> .../devicetree/bindings/ata/ahci-platform.txt | 2 + .../devicetree/bindings/pci/spear13xx-pcie.txt | 7 + .../devicetree/bindings/phy/spear13xx-miphy.txt | 8 + MAINTAINERS | 6 + arch/arm/boot/dts/spear1310-evb.dts | 4 + arch/arm/boot/dts/spear1310.dtsi | 87 ++++- arch/arm/boot/dts/spear1340-evb.dts | 4 + arch/arm/boot/dts/spear1340.dtsi | 29 ++- arch/arm/boot/dts/spear13xx.dtsi | 10 +- arch/arm/configs/spear13xx_defconfig | 16 + arch/arm/mach-spear/Kconfig | 3 + arch/arm/mach-spear/include/mach/spear.h | 4 +- arch/arm/mach-spear/spear1340.c | 127 +----- arch/arm/mach-spear/spear13xx.c | 2 +- drivers/ata/ahci.h | 2 + drivers/ata/ahci_platform.c | 20 + drivers/clk/spear/spear1310_clock.c | 6 +- drivers/clk/spear/spear1340_clock.c | 2 +- drivers/pci/host/Kconfig | 5 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-spear13xx.c | 407 +++++++++++++++++ drivers/phy/Kconfig | 6 + drivers/phy/Makefile | 1 + drivers/phy/phy-core.c | 2 +- drivers/phy/phy-spear13xx-sata-pcie.c | 481 ++++++++++++++++++++ 25 files changed, 1102 insertions(+), 140 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/spear13xx-pcie.txt create mode 100644 Documentation/devicetree/bindings/phy/spear13xx-miphy.txt create mode 100644 drivers/pci/host/pcie-spear13xx.c create mode 100644 drivers/phy/phy-spear13xx-sata-pcie.c -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
