[PATCH v2 2/2] media: ov7740: Document device tree bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Add the device tree binding documentation for ov7740 driver and
add a new entry of ov7740 to the MAINTAINERS file.

Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxxxxxx>
---

Changes in v2:
 - Split off the bindings into a separate patch.
 - Add a new entry to the MAINTAINERS file.

 .../devicetree/bindings/media/i2c/ov7740.txt       | 43 ++++++++++++++++++++++
 MAINTAINERS                                        |  8 ++++
 2 files changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7740.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/ov7740.txt b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
new file mode 100644
index 000000000000..b306e5aa97bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
@@ -0,0 +1,43 @@
+* Omnivision OV7740 CMOS image sensor
+
+The Omnivision OV7740 image sensor supports multiple output image
+size, such as VGA, and QVGA, CIF and any size smaller. It also
+supports the RAW RGB and YUV output formats.
+
+Required Properties:
+- compatible: should be "ovti,ov7740"
+- clocks: reference to the xvclk input clock.
+- clock-names: should be "xvclk".
+
+Optional Properties:
+- reset-gpios: reference to the GPIO connected to the reset_b pin,
+  if any. Active low with pull-ip resistor.
+- powerdown-gpios: reference to the GPIO connected to the pwdn pin,
+  if any. Active high with pull-down resistor.
+
+The device node must contain one 'port' child node for its digital
+output video port, in accordance with the video interface bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+	i2c1: i2c@fc028000 {
+		ov7740: camera@21 {
+			compatible = "ovti,ov7740";
+			reg = <0x21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sensor_power &pinctrl_sensor_reset>;
+			clocks = <&isc>;
+			clock-names = "xvclk";
+			assigned-clocks = <&isc>;
+			assigned-clock-rates = <24000000>;
+			reset-gpios = <&pioA 43 GPIO_ACTIVE_LOW>;
+			powerdown-gpios = <&pioA 44 GPIO_ACTIVE_HIGH>;
+
+			port {
+				ov7740_0: endpoint {
+					remote-endpoint = <&isc_0>;
+				};
+			};
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 90230fe020f3..f0f3f121d1d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9965,6 +9965,14 @@ S:	Maintained
 F:	drivers/media/i2c/ov7670.c
 F:	Documentation/devicetree/bindings/media/i2c/ov7670.txt
 
+OMNIVISION OV7740 SENSOR DRIVER
+M:	Wenyou Yang <wenyou.yang@xxxxxxxxxxxxx>
+L:	linux-media@xxxxxxxxxxxxxxx
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	drivers/media/i2c/ov7740.c
+F:	Documentation/devicetree/bindings/media/i2c/ov7740.txt
+
 ONENAND FLASH DRIVER
 M:	Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
 L:	linux-mtd@xxxxxxxxxxxxxxxxxxx
-- 
2.13.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux