From: Ludovic Barre <ludovic.barre@xxxxxx> This series adds: -Management of multi-bank of external interrupts stm32h7 has up to 96 inputs (3 banks of 32 inputs). -Fix initial value after cold/hot boot (wakeup issue). Changes v2: -Remove irq_mask and adds const on struct stm32_exti_bank -Add wrapper functions pending and ack -Replace BITS_PER_LONG by IRQS_PER_BANK -Fill commit message on "ARM: dts: stm32: add support of exti on stm32h743" -Add system config bank for stm32h7 Ludovic Barre (9): irqchip: stm32: select GENERIC_IRQ_CHIP irqchip: stm32: add multi-bank management dt-bindings: interrupt-controllers: add compatible string for stm32h7 irqchip: stm32: add stm32h7 support irqchip: stm32: fix initial values irqchip: stm32: move the wakeup on interrupt mask ARM: dts: stm32: add exti support for stm32h743 ARM: dts: stm32: add system config bank node for stm32h743 ARM: dts: stm32: add support of exti on stm32h743 pinctrl .../interrupt-controller/st,stm32-exti.txt | 4 +- arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 24 +++ arch/arm/boot/dts/stm32h743.dtsi | 13 ++ drivers/irqchip/Kconfig | 1 + drivers/irqchip/irq-stm32-exti.c | 208 ++++++++++++++++----- 5 files changed, 200 insertions(+), 50 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
