Add resets properties to all nodes that have reset lines.
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/uniphier-ld4.dtsi | 9 +++++++++
arch/arm/boot/dts/uniphier-pro4.dtsi | 11 +++++++++++
arch/arm/boot/dts/uniphier-pro5.dtsi | 11 +++++++++++
arch/arm/boot/dts/uniphier-pxs2.dtsi | 12 ++++++++++++
arch/arm/boot/dts/uniphier-sld8.dtsi | 9 +++++++++
5 files changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index c0cd300..01fc3e1 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -71,6 +71,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
@@ -81,6 +82,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
@@ -91,6 +93,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
@@ -101,6 +104,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
@@ -127,6 +131,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -140,6 +145,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -153,6 +159,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
@@ -166,6 +173,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -319,6 +327,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 095a364..7955c3a 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -79,6 +79,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
@@ -89,6 +90,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
@@ -99,6 +101,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
@@ -109,6 +112,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
@@ -135,6 +139,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -148,6 +153,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -161,6 +167,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
@@ -174,6 +181,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -187,6 +195,7 @@
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
@@ -198,6 +207,7 @@
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
+ resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
@@ -338,6 +348,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index dba944f..6589b8a 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -166,6 +166,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
@@ -176,6 +177,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
@@ -186,6 +188,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
@@ -196,6 +199,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
@@ -222,6 +226,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -235,6 +240,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -248,6 +254,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
@@ -261,6 +268,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -274,6 +282,7 @@
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
@@ -285,6 +294,7 @@
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
+ resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
@@ -399,6 +409,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index a745437..d82d6d8 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -173,6 +173,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
@@ -183,6 +184,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
@@ -193,6 +195,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
@@ -203,6 +206,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
@@ -232,6 +236,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -245,6 +250,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -258,6 +264,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
@@ -271,6 +278,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -282,6 +290,7 @@
#size-cells = <0>;
interrupts = <0 45 4>;
clocks = <&peri_clk 8>;
+ resets = <&peri_rst 8>;
clock-frequency = <400000>;
};
@@ -293,6 +302,7 @@
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
@@ -304,6 +314,7 @@
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
+ resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
@@ -425,6 +436,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index df6d870..7188536 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -71,6 +71,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
@@ -81,6 +82,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
@@ -91,6 +93,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
@@ -101,6 +104,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
@@ -131,6 +135,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -144,6 +149,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -157,6 +163,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
@@ -170,6 +177,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -323,6 +331,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
