Re: [PATCH v3 05/10] arm: dts: mt7623: update pio, usb and crypto nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 10/02/2017 03:54 AM, Ryder Lee wrote:
> This patch updates pio, usb and crypto nodes to make them be consistent
> with the binding documents.
> 
> Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/mt7623.dtsi | 26 ++++++++++++++------------
>  1 file changed, 14 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 381843e..0640fb7 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -227,8 +227,7 @@
>  	};
>  
>  	pio: pinctrl@10005000 {
> -		compatible = "mediatek,mt7623-pinctrl",
> -			     "mediatek,mt2701-pinctrl";
> +		compatible = "mediatek,mt7623-pinctrl";

Looks good.

>  		reg = <0 0x1000b000 0 0x1000>;
>  		mediatek,pctl-regmap = <&syscfg_pctl_a>;
>  		pins-are-numbered;
> @@ -680,7 +679,7 @@
>  		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
>  		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
>  			 <&topckgen CLK_TOP_ETHIF_SEL>;
> -		clock-names = "sys_ck", "free_ck";
> +		clock-names = "sys_ck", "ref_ck";

This is already merged. Please rebase.

>  		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
>  		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
>  		status = "disabled";
> @@ -690,8 +689,6 @@
>  		compatible = "mediatek,mt7623-u3phy",
>  			     "mediatek,mt2701-u3phy";
>  		reg = <0 0x1a1c4000 0 0x0700>;
> -		clocks = <&clk26m>;
> -		clock-names = "u3phya_ref";

Same here.

>  		#address-cells = <2>;
>  		#size-cells = <2>;
>  		ranges;
> @@ -699,12 +696,16 @@
>  
>  		u2port0: usb-phy@1a1c4800 {
>  			reg = <0 0x1a1c4800 0 0x0100>;
> +			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
> +			clock-names = "ref";

Same here.

>  			#phy-cells = <1>;
>  			status = "okay";
>  		};
>  
>  		u3port0: usb-phy@1a1c4900 {
>  			reg = <0 0x1a1c4900 0 0x0700>;
> +			clocks = <&clk26m>;
> +			clock-names = "ref";

Same here.

>  			#phy-cells = <1>;
>  			status = "okay";
>  		};
> @@ -719,7 +720,7 @@
>  		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
>  		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
>  			 <&topckgen CLK_TOP_ETHIF_SEL>;
> -		clock-names = "sys_ck", "free_ck";
> +		clock-names = "sys_ck", "ref_ck";

Same here.

>  		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
>  		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
>  		status = "disabled";
> @@ -729,8 +730,6 @@
>  		compatible = "mediatek,mt7623-u3phy",
>  			     "mediatek,mt2701-u3phy";
>  		reg = <0 0x1a244000 0 0x0700>;
> -		clocks = <&clk26m>;
> -		clock-names = "u3phya_ref";

Same here.

>  		#address-cells = <2>;
>  		#size-cells = <2>;
>  		ranges;
> @@ -738,12 +737,16 @@
>  
>  		u2port1: usb-phy@1a244800 {
>  			reg = <0 0x1a244800 0 0x0100>;
> +			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
> +			clock-names = "ref";

Same here.

>  			#phy-cells = <1>;
>  			status = "okay";
>  		};
>  
>  		u3port1: usb-phy@1a244900 {
>  			reg = <0 0x1a244900 0 0x0700>;
> +			clocks = <&clk26m>;
> +			clock-names = "ref";

Same here.

>  			#phy-cells = <1>;
>  			status = "okay";
>  		};
> @@ -784,16 +787,15 @@
>  	};
>  
>  	crypto: crypto@1b240000 {
> -		compatible = "mediatek,mt7623-crypto";
> +		compatible = "mediatek,eip97-crypto";

Crypto node is not present in upstream.

Regards,
Matthias

>  		reg = <0 0x1b240000 0 0x20000>;
>  		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
>  			     <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
>  			     <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
>  			     <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
>  			     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
> -		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
> -			 <&ethsys CLK_ETHSYS_CRYPTO>;
> -		clock-names = "ethif","cryp";
> +		clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
> +		clock-names = "cryp";
>  		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
>  		status = "disabled";
>  	};
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux