Re: [PATCH v3 2/2] drivers/irqchip: gicv3: add workaround for Synquacer pre-ITS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Oct 12, 2017 at 4:34 PM, Rob Herring <robh+dt@xxxxxxxxxx> wrote:
> On Thu, Oct 12, 2017 at 1:32 PM, Ard Biesheuvel
> <ard.biesheuvel@xxxxxxxxxx> wrote:
>> The Socionext Synquacer SoC's implementation of GICv3 has a so-called
>> 'pre-ITS', which maps 32-bit writes targeted at a separate window of
>> size '4 << device_id_bits' onto writes to GITS_TRANSLATER with device
>> ID taken from bits [device_id_bits + 1:2] of the window offset.
>> Writes that target GITS_TRANSLATER directly are reported as originating
>> from device ID #0.
>>
>> So add a workaround for this. Given that this breaks isolation, clear
>> the IRQ_DOMAIN_FLAG_MSI_REMAP flag as well.
>>
>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt |  4 ++
>>  arch/arm64/Kconfig                                                    |  8 +++
>>  drivers/irqchip/irq-gic-v3-its.c                                      | 63 +++++++++++++++++++-
>>  3 files changed, 72 insertions(+), 3 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
>> index 4c29cdab0ea5..0798a61bbf99 100644
>> --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
>> +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
>> @@ -75,6 +75,10 @@ These nodes must have the following properties:
>>  - reg: Specifies the base physical address and size of the ITS
>>    registers.
>>
>> +Optional:
>> +- socionext,synquacer-pre-its: (u32, u32) tuple describing the host address
>> +  and size of the pre-ITS window, as implemented on the Socionext Synquacer SoC
>
> Sounds like a separate h/w block to me and addresses should be in
> "reg". I would suggest you define a separate node for the pre-its
> block and then use of_find_compatible_node() from the GIC driver to
> retrieve the node and whatever you need from it. Or do an SoC specific
> compatible string for the GIC and let that imply whatever information
> you need. Then the next quirk doesn't need a DT update.

Based on further irc discussion about what this pre-its thing is, I
think the property here is fine after all.

Acked-by: Rob Herring <robh@xxxxxxxxxx>

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux