[PATCH 2/2] ARM: dts: r8a7743: Add xhci support to SoC dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>

Add node for xhci. Boards DT files will enable it if needed.

Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/r8a7743.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 699c040..386bf07 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -931,6 +931,26 @@
 			status = "disabled";
 		};
 
+		/*
+		 * pci1 and xhci share the same phy, therefore only one of them
+		 * can be active at any one time. If both of them are enabled,
+		 * a race condition will determine who'll control the phy.
+		 * A firmware file is needed by the xhci driver in order for
+		 * USB 3.0 to work properly.
+		 */
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7743",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		sdhi0: sd@ee100000 {
 			compatible = "renesas,sdhi-r8a7743";
 			reg = <0 0xee100000 0 0x328>;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux