On Mon, Jan 27, 2014 at 12:27:14PM -0300, Ezequiel Garcia wrote:
> +static int armada370_wdt_clock_init(struct platform_device *pdev,
> + struct orion_watchdog *dev)
> +{
> + int ret;
> +
> + dev->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(dev->clk))
> + return PTR_ERR(dev->clk);
> + ret = clk_prepare_enable(dev->clk);
> + if (ret)
> + return ret;
> +
> + /* Setup watchdog input clock */
> + atomic_io_modify(dev->reg + TIMER_CTRL,
> + WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT),
> + WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT));
> +
> + dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO;
> + return 0;
> +}
> +
> +static int armadaxp_wdt_clock_init(struct platform_device *pdev,
> + struct orion_watchdog *dev)
> +{
> + int ret;
> +
> + dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
> + if (IS_ERR(dev->clk))
> + return PTR_ERR(dev->clk);
> + ret = clk_prepare_enable(dev->clk);
> + if (ret)
> + return ret;
> +
> + /* Enable the fixed watchdog clock input */
> + atomic_io_modify(dev->reg + TIMER_CTRL,
> + WDT_AXP_FIXED_ENABLE_BIT,
> + WDT_AXP_FIXED_ENABLE_BIT);
> +
> + dev->clk_rate = clk_get_rate(dev->clk);
> + return 0;
> +}
Doesn't this result in dev->clk being leaked? Or at least a difference
in the way dev->clk needs to be cleaned up between these two functions?
I think it would be better in this case to use the standard clk_get() in
the first function and always use clk_put()... until there is a devm_*
version of the of_clk_get* functions.
--
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
