Re: [PATCH 7/7] ARM: dts: Use ti-sysc module driver for omap4 musb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




* Tony Lindgren <tony@xxxxxxxxxxx> [170929 15:35]:
> Let's make use of the generic ti-sysc module for musb to have
> a child device with working runtime PM.
...
> +		target-module@4a0ab000 {
> +			compatible = "ti,sysc-omap4";
>  			ti,hwmods = "usb_otg_hs";

And this should be compatible with "ti,sysc-omap2", I messed it up while
changing from type1 and 2 to omap2 and omap4. Will apply the updated
version below.

Regards,

Tony

8< ---------------------
>From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@xxxxxxxxxxx>
Date: Fri, 29 Sep 2017 08:20:50 -0700
Subject: [PATCH] ARM: dts: Use ti-sysc module driver for omap4 musb

Let's make use of the generic ti-sysc module for musb to have
a child device with working runtime PM.

Cc: Bin Liu <b-liu@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 arch/arm/boot/dts/omap4.dtsi | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -1117,19 +1117,31 @@
 			reg-names = "otghs_control";
 		};
 
-		usb_otg_hs: usb_otg_hs@4a0ab000 {
-			compatible = "ti,omap4-musb";
-			reg = <0x4a0ab000 0x7ff>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc", "dma";
+		target-module@4a0ab000 {
+			compatible = "ti,sysc-omap2";
 			ti,hwmods = "usb_otg_hs";
-			usb-phy = <&usb2_phy>;
-			phys = <&usb2_phy>;
-			phy-names = "usb2-phy";
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
-			ctrl-module = <&omap_control_usbotg>;
+			reg = <0x4a0ab000 0x4>,
+			      <0x4a0ab004 0x4>,
+			      <0x4a0ab008 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a0ab000 0x1000>;
+
+			usb_otg_hs: otg@0 {
+				compatible = "ti,omap2-musb";
+				reg = <0x0 0x7ff>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "mc", "dma";
+				usb-phy = <&usb2_phy>;
+				phys = <&usb2_phy>;
+				phy-names = "usb2-phy";
+				multipoint = <1>;
+				num-eps = <16>;
+				ram-bits = <12>;
+				ctrl-module = <&omap_control_usbotg>;
+			};
 		};
 
 		aes1: aes@4b501000 {
-- 
2.14.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux