On Mon, Oct 09, 2017 at 07:18:24PM +0300, Sergei Shtylyov wrote:
> Hello!
>
> On 10/09/2017 04:21 PM, Biju Das wrote:
>
> >Enable HS-USB device for the iWave G20D-Q7 carrier board based on
> >RZ/G1M.
> >Also disable the host mode support on usb otg port by default to avoid
> >pin conflicts.
> >
> >Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> >Signed-off-by: Chris Paterson <chris.paterson2@xxxxxxxxxxx>
> >---
> > arch/arm/boot/dts/iwg20d-q7-common.dtsi | 8 +++++++-
> > 1 file changed, 7 insertions(+), 1 deletion(-)
> >
> >diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> >index 1c072c0..e6b50c6 100644
> >--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> >+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> [...]
> >@@ -72,7 +78,7 @@
> > };
> > &pci0 {
> >- status = "okay";
> >+ status = "disabled";
>
> I think you may just omit this prop -- you most prolly have it
> "disabloed" in the R8A7743's DT.
Yes, I expect so too.
> > pinctrl-0 = <&usb0_pins>;
> > pinctrl-names = "default";
> > };
>
> MBR, Sergei
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
