This series introduces platform bus (OpenFirmware) binding for via-rhine, as used in various ARM-based Systems-on-Chip by VIA/WonderMedia. This has been tested in OF configuration by myself on a WM8950-based VIA APC Rock development board, and in PCI configuration by Roger. Unfortunately, I can't find my original submission from 30 Nov in any of the mailing list archives (must have done something stupid while sending). However, Roger seems to have received the patches fine, tested them on PCI and signed off, so I'm including his Signed-off-by: with this submission along with my own. Please note that this series does not include any ifdefs for either PCI or OF case, so in Roger's set-up the third patch increased module size from 39372 to 40868 bytes (+3.8%). I'm following the example of via-velocity here, which didn't have ifdefs either (and I believe it is cleaner this way). Not sure if it's appropriate for 3.14 at this point, but getting it merged to -next would be much appreciated. Best regards, Alexey Alexey Charkov (3): net: via-rhine: switch to generic DMA functions net: via-rhine: reduce usage of the PCI-specific struct net: via-rhine: add OF bus binding .../devicetree/bindings/net/via-rhine.txt | 18 + drivers/net/ethernet/via/Kconfig | 2 +- drivers/net/ethernet/via/via-rhine.c | 403 ++++++++++++--------- 3 files changed, 260 insertions(+), 163 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/via-rhine.txt -- 1.8.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
