Hi Miquel,
On ven., oct. 06 2017, Miquel Raynal <miquel.raynal@xxxxxxxxxxxxxxxxxx> wrote:
> Add a node in Armada 37xx DTSI file for the second UART, with a
> different compatible due to its extended IP which has some
> differences with the first UART already in place.
>
> Make use of this commit to also fully describe the first port and
> use the same clear and named interrupt bindings for both ports.
>
> The standard UART (UART0) uses level-interrupts while the extended
> UART (UART1) uses edge-triggered interrupts.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxxxxxxxxx>
Acked-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> index a36d667f770e..72b68f23c001 100644
> --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> @@ -55,6 +55,7 @@
>
> aliases {
> serial0 = &uart0;
> + serial1 = &uart1;
> };
>
> cpus {
> @@ -136,7 +137,22 @@
> compatible = "marvell,armada-3700-uart";
> reg = <0x12000 0x200>;
> clocks = <&xtalclk>;
> - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts =
> + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uart-sum", "uart-tx", "uart-rx";
> + status = "disabled";
> + };
> +
> + uart1: serial@12200 {
> + compatible = "marvell,armada-3700-uart-ext";
> + reg = <0x12200 0x30>;
> + clocks = <&xtalclk>;
> + interrupts =
> + <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "uart-tx", "uart-rx";
> status = "disabled";
> };
>
> --
> 2.11.0
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
