On 05/10/2017 15:21, Peter Korsgaard wrote:
> Enable both gxbb USB controllers and add a 5V regulator for the OTG port
> VBUS, similar to p20x.
>
> Signed-off-by: Peter Korsgaard <peter@xxxxxxxxxxxxx>
> ---
> .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 29 ++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> index 38dfdde5c147..60cd9c3b11c8 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> @@ -88,6 +88,18 @@
> };
> };
>
> + usb_pwr: regulator-usb-pwrs {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "USB_PWR";
> +
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> vddio_card: gpio-regulator {
> compatible = "regulator-gpio";
>
> @@ -294,3 +306,20 @@
> pinctrl-0 = <&uart_ao_a_pins>;
> pinctrl-names = "default";
> };
> +
> +&usb0_phy {
> + status = "okay";
> + phy-supply = <&usb_pwr>;
> +};
> +
> +&usb1_phy {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
>
Indeed, I forgot to add USB to this board,
Thanks
Acked-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
