Hi folks, I've dropped the full set from devicetree and linux-acpi lists; let me know if you want it back. The entire set is posted to linux-media list. We have a large influx of new, unmerged, drivers that are now parsing fwnode endpoints and each one of them is doing this a little bit differently. The needs are still exactly the same for the graph data structure is device independent. This is still a non-trivial task and the majority of the driver implementations are buggy, just buggy in different ways. Facilitate parsing endpoints by adding a convenience function for parsing the endpoints, and make the omap3isp and rcar-vin drivers use them as an example. To show where we're getting with this, I've added support for async sub-device notifier support that is notifiers that can be registered by sub-device drivers as well as V4L2 fwnode improvements to make use of them and the DTS changes for the Nokia N9. Some of these patches I've posted previously in this set here: <URL:http://www.spinics.net/lists/linux-media/msg118764.html> Since that, the complete callback of the master notifier registering the V4L2 device is only called once all sub-notifiers have been completed as well. This way the device node creation can be postponed until all devices have been successfully initialised. With this, the as3645a driver successfully registers a sub-device to the media device created by the omap3isp driver. The kernel also has the information it's related to the sensor driven by the smiapp driver but we don't have a way to expose that information yet. The patches have a dependency to the as3645a driver fixes: <URL:https://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git/log/?h=fixes-4.14-rc3> since v14: - Patch "v4l: fwnode: Support generic parsing of graph endpoints in a device" depends on another patch "device property: preserve usecount for node passed to of_fwnode_graph_get_port_parent()". Add Depends-on tag. - Add patch "v4l: async: fix unbind error in v4l2_async_notifier_unregister()" by Niklas. Effectively the notifier's unbind callback is called before v4l2_async_cleanup(), not after it. - Fix complete callback error handling (patch "v4l: async: Fix notifier complete callback error handling"). - Rework error handling in in v4l2_async_match_notify() and add comments. No functional changes there. - Don't assign sd->dev to NULL in v4l2_async_cleanup() (patch "v4l: async: Don't set sd->dev NULL in v4l2_async_cleanup"). - Introduce a function to unbind sub-devices from a notifier. This is a common operation so a common implementation is beneficial. - Assign notifier's v4l2_dev (or sd for sub-device notifiers) NULL on failure. - Make v4l2_async_notifier_unregister() safe to call with a NULL argument. - Set the implicitly allocated sub-device notifier NULL on async sub-device unregistration (used to be a dangling pointer). - Clean up async sub-device unregistration. - Fix v4l2_fwnode_endpoint_free() comment to match KernelDoc style, i.e. make the function visible in documentation. - Don't add a random newline near the end of v4l2_async.h. - Move patch "v4l: fwnode: Move KernelDoc documentation to the header" later in the set. The five first patches should now address bugs in the V4L2 async framework, causing an oops on complete callback failure. since v13: - Add patch "v4l: fwnode: Add a convenience function for registering sensors" and make the sensor driver changes a lot smaller. - Fix v4l2_async_notifier_parse_fwnode_endpoints() error handling for omap3isp. - Return -ENODEV in rcar-vin if no async sub-device is available. I.e. fix a bug in previous versions of "rcar-vin: Use generic parser for parsing fwnode endpoints". - Rework notifier completion in patch "v4l: async: Allow binding notifiers to sub-devices". This fixes calling complete notifiers more than once; they are now all called once when all async sub-devices in all related notifiers have been bound. - Split the same patch ("v4l: async: Allow binding notifiers to sub-devices") into two, first one that prepares for async sub-devices and another that implements the bulk of support for sub-device notifiers. - Postpone sub-device bound callback until v4l2_device is available in all cases. This also applies to the media device. The notifier's bound callback was in some cases called before having v4l2_device in v13. - Prevent registering fwnodes as async sub-devices more than once. - Use list_move instead of list_del and list_add in v4l2_async_notifier_unbind_all_subdevs. - Call v4l2_async_notifier_release v4l2_async_notifier_cleanup instead. It's a cleanup function and does not release the object passed to it. - In v4l2_async_notifier_fwnode_parse_endpoint, set match_type field with the fwnode.fwnode field, not later. - In debug and other messages, use port@number/endpoint@number format. - Call fwnode_handle_put() to release references obtained using e.g. fwnode_graph_get_port_parent. - Multiple KernelDoc documentation fixes. since v12: - Merge patches "v4l: fwnode: Support generic parsing of graph endpoints in a device" and "v4l: fwnode: Support generic parsing of graph endpoints, per port". Improve the commit and KernelDoc documentation as well. - Reformat loop conditions in v4l2_async_notifier_try_complete() and v4l2_fwnode_reference_get_int_prop(). Improve comments in fwnode_property_get_reference_args() return value handling. Also check for -ENODATA in v4l2_fwnode_reference_parse_int_props(). - Add an ACPI example for v4l2_fwnode_reference_get_int_prop(). - Document index parameter, document nprops parameter better and fix -EINVAL error code documentation for v4l2_fwnode_reference_get_int_prop(). - Use WARN_ON_ONCE(true) instead of WARN_ON_ONCE(1) in v4l2_async_notifier_release(). since v11: - Add patch "et8ek8: Add support for flash and lens devices". - Add patch "v4l: fwnode: Support generic parsing of graph endpoints, per port". The use case for this is to parse only upstream ports in a device with sources and sinks. The downstream ports have already been parsed by other drivers. - Rename v4l2_fwnode_reference_parse_sensor_common as v4l2_async_notifier_parse_fwnode_sensor_common. This is in line with other functions that parse information using fwnode API and set up async sub-devices in the notifier. since v10: - Rename v4l2_async_get_subdev_notifier as v4l2_async_find_subdev_notifier, as this is what it effectively does: finds a notifier for a sub-device. Same for v4l2_async_notifier_get_v4l2_dev / v4l2_async_notifier_get_v4l2_dev. - Initialise lists before calling v4l2_async_notifier_call_complete() if there are no sub-devices in a notifier. - Warn on missing sub-device or existing v4l2_device on sub-device notifier register, and conversely missing v4l2_device or existing sub-device for a master notifier. - Set notifier's sd and v4l2_dev fields NULL when the sub-device is unregistered. - Document the newly added helper functions for parsing external references in v4l2-fwnode.c better. - Return -ENOENT in v4l2_fwnode_reference_parse if no entries are found, and other errors as they occur. - Turn the loop in v4l2_fwnode_reference_get_int_prop a while loop (was for). - Don't put fwnodes in v4l2_fwnode_reference_parse_int_props. - Fix description of parent field in struct v4l2_async_notifier. - In the documentation of v4l2_async_notifier_release, document that this function must be called also after v4l2_fwnode_reference_parse_sensor_common, not just v4l2_async_notifier_parse_fwnode_endpoints. The same goes for v4l2_async_notifier_parse_fwnode_endpoints as well as v4l2_fwnode_reference_parse_sensor_common. since v9: - Drop "as3645a: Switch to fwnode property API" and "ACPI: Document how to refer to LEDs from remote nodes" patches. They're better off separately from this set. - Address property documentation redundancy in smiapp DT binding documentation. - Add patches "ov5670: Add support for flash and lens devices" and "ov13858: Add support for flash and lens devices". since v8: - Improve terminology for notifiers. Instead of master / subdev, we have root, parent and subdev notifiers. - Renamed "flash" property as "flash-leds". There are many, and currently we make assumptions in a lot of places (e.g. LED bindings) that these are LEDs. While we don't have any other types of flashes supported right now (e.g. Xenon), it's safer to assume we might have them in the future. - Use ENOTCONN instead of EPERM to tell from driver's callback function that an endpoint is to be skipped but not handled as an error. - Avoid accessing notifier's subdevs array as well as num_subdevs field from rcar-vin driver. - Add a patch "v4l: async: Allow async notifier register call succeed with no subdevs", which allows, well, what the subject says. - Move checks for subdev / v4l2_dev from __v4l2_async_notifier_register() to v4l2_async_notifier_register() and v4l2_async_subdev_notifier_register(). - Don't initialise notifier->list. There was no need to do so, as this is the entry added to the list and not used otherwise. I.e. regarding this, the state before this patchset is restored. - Clean up error handling in v4l2_async_notifier_fwnode_parse_endpoint(). - WARN_ON() in v4l2_async_notifier_parse_fwnode_endpoints() if the asd_struct_size is smaller than size of struct v4l2_async_subdev. - Make v4l2_fwnode_reference_parse() static as there should be no need to use it outside the V4L2 fwnode framework. Also, remove the callback function as well as other arguments that always have the same value in current usage. (This can be changed later on if needed without affecting drivers.) - Add the patch "v4l: fwnode: Add a helper function to obtain device / interger references", which allows similar use than v4l2_fwnode_reference_parse() but is more useful on ACPI based systems --- on ACPI, you can only refer to device nodes (corresponding struct deice in Linux), not to data extension nodes under the devices. - Improve v4l2_fwnode_reference_parse_sensor_common() to work on ACPI based systems. - Add patch "ACPI: Document how to refer to LEDs from remote nodes" to document using and referring to LEDs on ACPI. - Rebase the set on AS3645A fixes I just sent ("AS3645A fixes") - In v4l2_fwnode_reference_parse_sensor_common(), tell if parsing a property failed. - Improved documentation for v4l2_async_notifier_parse_fwnode_endpoints(). - Fix v4l2_async_notifier_try_all_subdevs(); it is allowed that the list entry being iterated over is deleted but no other changes to the list are allowed. This could be the case if a sub-device driver's notifier binds a sub-device. Restart the loop whenever a match is found. - Add patch "as3645a: Switch to fwnode property API" which also adds ACPI support. since v7: - Added three more patches: v4l: async: Remove re-probing support v4l: async: Use more intuitive names for internal functions dt: bindings: smiapp: Document lens-focus and flash properties The last one was already sent previously after the rest of the patchset. - Removed re-probing support. This is hard to support and only useful in special cases. It can be reintroduced later on if there's really a need --- note that in e.g. omap3isp this was always broken and no-one ever complained. - Remove smiapp driver's async complete callback (and ops). It is redundant: the sub-device nodes are created through the master notifier. - Improve flash property documentation in video-interfaces.txt. - Introduce helper functions to call notifier operations, one for each operation. - Rename v4l2_async_test_notify as v4l2_async_match_notify and v4l2_async_belongs to v4l2_async_find_match. - v4l2_async_notifier_test_all_subdevs() renamed as v4l2_async_notifier_try_all_subdevs(). - Made notifier_v4l2_dev a function (it was a macro). - Registering subdev notifiers from sub-device drivers that control sub-devices created through sub-notifiers is now supported. In other words, subdev notifiers may be registered through other subdev notifiers. This is the source of the bulk of the changes between v7 and v8. - Add explanatory comments to helper functions used by V4L2 async framework. This should help understanding the internal workings of the framework. - Removed the "notifiers" list in struct v4l2_async_notifier. The information can be found from existing data structures. - Explicitly check that registering a non-subdev notifier has v4l2_dev and a subdev notifier has a sub-device pointer. - Unified several code paths between subdev notifiers and non-subdev notifiers. - Fixed v4l2_async_notifier_release() --- calling it on a notifier for which the driver had allocated the subdevs array would lead calling kvfree() on that array. Now notifier->max_subdevs is checked before proceeding. - Fixed a use-after-free issue in v4l2_async_notifier_fwnode_parse_endpoints(). - Small fixes to KernelDoc documentation for v4l2_async_notifier_parse_fwnode_endpoints(). since v6: - Drop the last patch that added variant for parsing endpoints given specific port and endpoints numbers. - Separate driver changes from the fwnode endpoint parser patch into two patches. rcar-vin driver is now using the name function. - Use -ENOTCONN to tell the parser that and endpoint (or a reference) is to be ignored. - parse_endpoint and parse_single callback functions are now optional and documented as such. - Added Laurent's patch adding notifier operations struct which I rebase on the fwnode parser patchset. I wrote another patch to call the notifier operations through macros. - Add DT bindings for flash and lens devices. - V4L2 fwnode parser for references (such as flash and lens). - Added smiapp driver support for async sub-devices (lens and flash). - Added a few fixes for omap3isp. since v5: - Use v4l2_async_ prefix for static functions as well (4th patch) - Use memcpy() to copy array rather than a loop - Document that the v4l2_async_subdev pointer in driver specific struct must be the first member - Improve documentation of the added functions (4th and 5th patches) - Arguments - More thorough explation of the purpose, usage and object lifetime - Added acks since v4: - Prepend the set with three documentation fixes. - The driver's async struct must begin with struct v4l2_async_subdev. Fix this for omap3isp and document it. - Improve documentation for new functions. - Don't use devm_ family of functions for allocating memory. Introduce v4l2_async_notifier_release() to release memory resources. - Rework both v4l2_async_notifier_fwnode_parse_endpoints() and v4l2_async_notifier_fwnode_parse_endpoint() and the local functions they call. This should make the code cleaner. Despite the name, for linking and typical usage reasons the functions remain in v4l2-fwnode.c. - Convert rcar-vin to use v4l2_async_notifier_fwnode_parse_endpoint(). - Use kvmalloc() for allocating the notifier's subdevs array. - max_subdevs argument for notifier_realloc is now the total maximum number of subdevs, not the number of available subdevs. - Use fwnode_device_is_available() to make sure the device actually exists. - Move the note telling v4l2_async_notifier_fwnode_parse_endpoints() should not be used by new drivers to the last patch adding v4l2_async_notifier_fwnode_parse_endpoint(). since v3: - Rebase on current mediatree master. since v2: - Rebase on CCP2 support patches. - Prepend a patch cleaning up omap3isp driver a little. since v1: - The first patch has been merged (it was a bugfix). - In anticipation that the parsing can take place over several iterations, take the existing number of async sub-devices into account when re-allocating an array of async sub-devices. - Rework the first patch to better anticipate parsing single endpoint at a time by a driver. - Add a second patch that adds a function for parsing endpoints one at a time based on port and endpoint numbers. Laurent Pinchart (1): v4l: async: Move async subdev notifier operations to a separate structure Niklas Söderlund (1): v4l: async: fix unbind error in v4l2_async_notifier_unregister() Sakari Ailus (30): v4l: async: Remove re-probing support v4l: async: Don't set sd->dev NULL in v4l2_async_cleanup v4l: async: Fix notifier complete callback error handling v4l: async: Correctly serialise async sub-device unregistration v4l: async: Use more intuitive names for internal functions v4l: async: Add V4L2 async documentation to the documentation build v4l: fwnode: Support generic parsing of graph endpoints in a device omap3isp: Use generic parser for parsing fwnode endpoints rcar-vin: Use generic parser for parsing fwnode endpoints omap3isp: Fix check for our own sub-devices omap3isp: Print the name of the entity where no source pads could be found v4l: async: Introduce helpers for calling async ops callbacks v4l: async: Register sub-devices before calling bound callback v4l: async: Allow async notifier register call succeed with no subdevs v4l: async: Prepare for async sub-device notifiers v4l: async: Allow binding notifiers to sub-devices v4l: async: Ensure only unique fwnodes are registered to notifiers dt: bindings: Add a binding for flash LED devices associated to a sensor dt: bindings: Add lens-focus binding for image sensors v4l: fwnode: Move KernelDoc documentation to the header v4l: fwnode: Add a helper function for parsing generic references v4l: fwnode: Add a helper function to obtain device / integer references v4l: fwnode: Add convenience function for parsing common external refs v4l: fwnode: Add a convenience function for registering sensors dt: bindings: smiapp: Document lens-focus and flash-leds properties smiapp: Add support for flash and lens devices et8ek8: Add support for flash and lens devices ov5670: Add support for flash and lens devices ov13858: Add support for flash and lens devices arm: dts: omap3: N9/N950: Add flash references to the camera .../devicetree/bindings/media/i2c/nokia,smia.txt | 2 + .../devicetree/bindings/media/video-interfaces.txt | 10 + Documentation/media/kapi/v4l2-async.rst | 3 + Documentation/media/kapi/v4l2-core.rst | 1 + arch/arm/boot/dts/omap3-n9.dts | 1 + arch/arm/boot/dts/omap3-n950-n9.dtsi | 4 +- arch/arm/boot/dts/omap3-n950.dts | 1 + drivers/media/i2c/et8ek8/et8ek8_driver.c | 2 +- drivers/media/i2c/ov13858.c | 2 +- drivers/media/i2c/ov5670.c | 2 +- drivers/media/i2c/smiapp/smiapp-core.c | 2 +- drivers/media/platform/am437x/am437x-vpfe.c | 8 +- drivers/media/platform/atmel/atmel-isc.c | 10 +- drivers/media/platform/atmel/atmel-isi.c | 10 +- drivers/media/platform/davinci/vpif_capture.c | 8 +- drivers/media/platform/davinci/vpif_display.c | 8 +- drivers/media/platform/exynos4-is/media-dev.c | 8 +- drivers/media/platform/omap3isp/isp.c | 133 ++--- drivers/media/platform/omap3isp/isp.h | 5 +- drivers/media/platform/pxa_camera.c | 8 +- drivers/media/platform/qcom/camss-8x16/camss.c | 8 +- drivers/media/platform/rcar-vin/rcar-core.c | 117 ++-- drivers/media/platform/rcar-vin/rcar-dma.c | 10 +- drivers/media/platform/rcar-vin/rcar-v4l2.c | 14 +- drivers/media/platform/rcar-vin/rcar-vin.h | 4 +- drivers/media/platform/rcar_drif.c | 10 +- drivers/media/platform/soc_camera/soc_camera.c | 14 +- drivers/media/platform/stm32/stm32-dcmi.c | 10 +- drivers/media/platform/ti-vpe/cal.c | 8 +- drivers/media/platform/xilinx/xilinx-vipp.c | 8 +- drivers/media/v4l2-core/v4l2-async.c | 537 ++++++++++++++---- drivers/media/v4l2-core/v4l2-fwnode.c | 623 ++++++++++++++++++--- drivers/staging/media/imx/imx-media-dev.c | 8 +- include/media/v4l2-async.h | 90 ++- include/media/v4l2-fwnode.h | 220 +++++++- include/media/v4l2-subdev.h | 3 + 36 files changed, 1488 insertions(+), 424 deletions(-) create mode 100644 Documentation/media/kapi/v4l2-async.rst -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
