Select the options necessary to get USB, coincell, WiFI, touchscreen and backlight on the Z2 Tablet (and other family B devices) working. The device specific peripherals are selected as modules. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> --- arch/arm/configs/qcom_defconfig | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index f6aa100bf69c..d937f2be7c39 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -60,6 +60,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y +CONFIG_QCOM_COINCELL=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y @@ -82,6 +83,7 @@ CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_BRCMFMAC=m CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -93,6 +95,10 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_PM8XXX_VIBRATOR=y CONFIG_INPUT_PMIC8XXX_PWRKEY=y CONFIG_INPUT_UINPUT=y +CONFIG_RMI4_CORE=m +CONFIG_RMI4_I2C=m +CONFIG_RMI4_F11=y +CONFIG_RMI4_F12=y CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y @@ -128,8 +134,13 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_QCOM_RPM=y CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_MEDIA_SUPPORT=y CONFIG_FB=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_LP855X=m CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_DYNAMIC_MINORS=y @@ -148,11 +159,17 @@ CONFIG_USB_ACM=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_CHIPIDEA_ULPI=y CONFIG_USB_SERIAL=y CONFIG_USB_MSM_OTG=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_CONFIGFS=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_ULPI_BUS=y CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y @@ -187,6 +204,7 @@ CONFIG_REMOTEPROC=y CONFIG_QCOM_ADSP_PIL=y CONFIG_QCOM_Q6V5_PIL=y CONFIG_QCOM_WCNSS_PIL=y +CONFIG_RPMSG_CHAR=y CONFIG_RPMSG_QCOM_SMD=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_PM=y @@ -195,6 +213,7 @@ CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y CONFIG_QCOM_WCNSS_CTRL=y +CONFIG_EXTCON_QCOM_SPMI_MISC=y CONFIG_IIO=y CONFIG_IIO_BUFFER_CB=y CONFIG_IIO_SW_TRIGGER=y @@ -203,8 +222,10 @@ CONFIG_MPU3050_I2C=y CONFIG_AK8975=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_BMP280=y +CONFIG_PWM=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y +CONFIG_PHY_QCOM_USB_HS=y CONFIG_QCOM_QFPROM=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y @@ -226,3 +247,4 @@ CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set +CONFIG_CRYPTO_DRBG_MENU=y -- 2.12.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
