On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote:
> Enable the buses that are in use and the devices that are attached.
> Currently that is just the battery backed RTC.
>
> Some of these buses are for hotplugged cards, such as PCIe cards. Others
> do not yet have upstream drivers, so there are no devices attached.
>
> Signed-off-by: Joel Stanley <joel@xxxxxxxxx>
> ---
> arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 ++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> index 1190fec1b5d0..f79c1d21c47f 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> @@ -79,3 +79,57 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_rmii1_default>;
> };
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + /* PCIe slot 1 (x8) */
> + status = "enabled";
This is not okay. Neither are those below.
Cheers,
Andrew
> +};
> +
> +&i2c7 {
> + /* PCIe slot 2 (x16) */
> + status = "enabled";
> +};
> +
> +&i2c8 {
> + /* PCIe slot 3 (x16) */
> + status = "enabled";
> +};
> +
> +&i2c9 {
> + /* PCIe slot 4 (x16) */
> + status = "enabled";
> +};
> +
> +&i2c10 {
> + /* PCIe slot 5 (x8) */
> + status = "enabled";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + rtc@32 {
> + compatible = "epson,rx8900";
> + reg = <0x32>;
> + };
> +};
> +
> +&i2c12 {
> + status = "okay";
> +};Attachment:
signature.asc
Description: This is a digitally signed message part
