Add initial documentation for the pci-rcar-gen2 driver device tree bindings. This is not yet complete and needs work on the sub-nodes for the PCI bus. Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx> --- Cc: linux-sh@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Cc: horms+renesas@xxxxxxxxxxxx --- .../devicetree/bindings/pci/renessas,pci-r8a7790.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/renessas,pci-r8a7790.txt diff --git a/Documentation/devicetree/bindings/pci/renessas,pci-r8a7790.txt b/Documentation/devicetree/bindings/pci/renessas,pci-r8a7790.txt new file mode 100644 index 0000000..a6fd432 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/renessas,pci-r8a7790.txt @@ -0,0 +1,12 @@ +Renesas internal AHB to PCI bridge + +This is the bridge used internally to connect the USB controllers to the +AHB. + +Required properties: + - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC + - reg : A list of physical regions to access the device. The first is + the operational registers for the OHCI/EHCI controller and the + second region is for the bridge configuration and control registers. + - interrupts : interrupt for the device + - clocks : The reference to the device clock -- 1.8.5.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
