Enable pci1 and pci2 nodes for USB controllers attached to the AHB<>PCI
bridge devices. Node pci0 is enabled for the moment as a device, but
could be switched to usb-gadget mode later.
Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
Reviewed-by: Ian Molton <ian.molton@xxxxxxxxxxxxxxx>
---
Cc: linux-sh@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Magnus Damm <magnus.damm@xxxxxxxxx>
Cc: Simon Horman <horms@xxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a7790-lager.dts | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 57569cb..8dfcd25 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -80,6 +80,22 @@
renesas,groups = "mmc1_data8", "mmc1_ctrl";
renesas,function = "mmc1";
};
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb";
+ };
+
+ usb2_pins: usb2 {
+ renesas,groups = "usb2";
+ renesas,function = "usb";
+ };
+
};
&mmcif1 {
@@ -91,3 +107,21 @@
non-removable;
status = "okay";
};
+
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&pci2 {
+ status = "okay";
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+};
--
1.8.5.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
