Hi Chris,
thanks for the patches
On Tue, Oct 03, 2017 at 02:33:33AM -0500, Chris Brandt wrote:
> Aspects like the number of ports and the location where peripherals are
> brought out differ between the RZ/A1H and RZ/A1L.
>
> Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
> ---
> drivers/pinctrl/pinctrl-rza1.c | 134 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 134 insertions(+)
>
> diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/pinctrl-rza1.c
> index 04d058706b80..717c0f4449a0 100644
> --- a/drivers/pinctrl/pinctrl-rza1.c
> +++ b/drivers/pinctrl/pinctrl-rza1.c
> @@ -302,6 +302,134 @@ static const struct rza1_pinmux_conf rza1h_pmx_conf = {
> .swio_entries = rza1h_swio_entries,
> };
>
> +/* ----------------------------------------------------------------------------
> + * RZ/A1L (r7s72102) pinmux flags
> + */
Do you have other authoritative sources for pin's bidir settings?
According to the publicly available manual, there are other pins that
needs bidir not listed here.
As the same happened with RZ/A1H I'm not too concerned, but I'm
listing some of there here nonetheless
> +
> +static const struct rza1_bidir_pin rza1l_bidir_pins_p1[] = {
> + { .pin = 0, .func = 1 },
> + { .pin = 1, .func = 1 },
> + { .pin = 2, .func = 1 },
> + { .pin = 3, .func = 1 },
> + { .pin = 4, .func = 1 },
> + { .pin = 5, .func = 1 },
> + { .pin = 6, .func = 1 },
> + { .pin = 7, .func = 1 },
> +};
> +
P2 has several TIOC pins in mode 4 and SSI in mode 2
> +static const struct rza1_bidir_pin rza1l_bidir_pins_p3[] = {
> + { .pin = 0, .func = 2 },
> + { .pin = 1, .func = 2 },
> + { .pin = 2, .func = 2 },
> + { .pin = 4, .func = 2 },
> + { .pin = 5, .func = 2 },
> + { .pin = 10, .func = 2 },
> + { .pin = 11, .func = 2 },
> + { .pin = 12, .func = 2 },
> + { .pin = 13, .func = 2 },
> +};
TIOC in mode3, SKC3 and SCK1 in mode 5
> +
> +static const struct rza1_bidir_pin rza1l_bidir_pins_p4[] = {
> + { .pin = 1, .func = 4 },
> + { .pin = 2, .func = 2 },
> + { .pin = 3, .func = 2 },
> + { .pin = 6, .func = 2 },
> + { .pin = 7, .func = 2 },
> +};
Confused, you're here listing TIOC2B pin (pin 1 mode #4) but not TIOC1B (pin 0 mode #4)
ET_MDIO in mode 4, which we list as bidir in RZ/A1H
> +
> +static const struct rza1_bidir_pin rza1l_bidir_pins_p5[] = {
> + { .pin = 0, .func = 1 },
> + { .pin = 1, .func = 1 },
> + { .pin = 2, .func = 1 },
> + { .pin = 3, .func = 1 },
> + { .pin = 4, .func = 1 },
> + { .pin = 5, .func = 1 },
> + { .pin = 6, .func = 1 },
> + { .pin = 7, .func = 1 },
> + { .pin = 8, .func = 1 },
> + { .pin = 9, .func = 1 },
> + { .pin = 10, .func = 1 },
> + { .pin = 11, .func = 1 },
> + { .pin = 12, .func = 1 },
> + { .pin = 13, .func = 1 },
> + { .pin = 14, .func = 1 },
> + { .pin = 15, .func = 1 },
> + { .pin = 0, .func = 2 },
> + { .pin = 1, .func = 2 },
> + { .pin = 2, .func = 2 },
> + { .pin = 3, .func = 2 },
> +};
I'll stop here with bidir as I guess we're following different documents, as
it happened for RZ/A1H you may have another source of informations
> +
> +static const struct rza1_bidir_pin rza1l_bidir_pins_p6[] = {
> + { .pin = 0, .func = 1 },
> + { .pin = 1, .func = 1 },
> + { .pin = 2, .func = 1 },
> + { .pin = 3, .func = 1 },
> + { .pin = 4, .func = 1 },
> + { .pin = 5, .func = 1 },
> + { .pin = 6, .func = 1 },
> + { .pin = 7, .func = 1 },
> + { .pin = 8, .func = 1 },
> + { .pin = 9, .func = 1 },
> + { .pin = 10, .func = 1 },
> + { .pin = 11, .func = 1 },
> + { .pin = 12, .func = 1 },
> + { .pin = 13, .func = 1 },
> + { .pin = 14, .func = 1 },
> + { .pin = 15, .func = 1 },
> +};
> +
> +static const struct rza1_bidir_pin rza1l_bidir_pins_p7[] = {
> + { .pin = 2, .func = 2 },
> + { .pin = 3, .func = 2 },
> + { .pin = 5, .func = 2 },
> + { .pin = 6, .func = 2 },
> + { .pin = 7, .func = 2 },
> + { .pin = 2, .func = 3 },
> + { .pin = 3, .func = 3 },
> + { .pin = 5, .func = 3 },
> + { .pin = 6, .func = 3 },
> + { .pin = 7, .func = 3 },
> +};
> +
> +static const struct rza1_bidir_pin rza1l_bidir_pins_p9[] = {
> + { .pin = 1, .func = 2 },
> + { .pin = 0, .func = 3 },
> + { .pin = 1, .func = 3 },
> + { .pin = 3, .func = 3 },
> + { .pin = 4, .func = 3 },
> + { .pin = 5, .func = 3 },
> +};
> +
> +static const struct rza1_swio_pin rza1l_swio_pins[] = {
> + { .port = 2, .pin = 8, .func = 2, .input = 0 },
> + { .port = 5, .pin = 6, .func = 3, .input = 0 },
> + { .port = 6, .pin = 6, .func = 3, .input = 0 },
> + { .port = 6, .pin = 10, .func = 3, .input = 0 },
> + { .port = 7, .pin = 10, .func = 2, .input = 0 },
> + { .port = 8, .pin = 2, .func = 3, .input = 0 },
> +};
I count 20 SWIO pins
TIOC[0-4][A-D]
SSITx[0-3]
WDTOVF
Thanks
j
> +
> +static const struct rza1_bidir_entry rza1l_bidir_entries[RZA1_NPORTS] = {
> + [1] = { ARRAY_SIZE(rza1l_bidir_pins_p1), rza1l_bidir_pins_p1 },
> + [3] = { ARRAY_SIZE(rza1l_bidir_pins_p3), rza1l_bidir_pins_p3 },
> + [4] = { ARRAY_SIZE(rza1l_bidir_pins_p4), rza1l_bidir_pins_p4 },
> + [5] = { ARRAY_SIZE(rza1l_bidir_pins_p4), rza1l_bidir_pins_p5 },
> + [6] = { ARRAY_SIZE(rza1l_bidir_pins_p6), rza1l_bidir_pins_p6 },
> + [7] = { ARRAY_SIZE(rza1l_bidir_pins_p7), rza1l_bidir_pins_p7 },
> + [9] = { ARRAY_SIZE(rza1l_bidir_pins_p9), rza1l_bidir_pins_p9 },
> +};
> +
> +static const struct rza1_swio_entry rza1l_swio_entries[] = {
> + [0] = { ARRAY_SIZE(rza1h_swio_pins), rza1h_swio_pins },
> +};
> +
> +/* RZ/A1L (r7s72102x) pinmux flags table */
> +static const struct rza1_pinmux_conf rza1l_pmx_conf = {
> + .bidir_entries = rza1l_bidir_entries,
> + .swio_entries = rza1l_swio_entries,
> +};
> +
> /* ----------------------------------------------------------------------------
> * RZ/A1 types
> */
> @@ -1283,9 +1411,15 @@ static int rza1_pinctrl_probe(struct platform_device *pdev)
>
> static const struct of_device_id rza1_pinctrl_of_match[] = {
> {
> + /* RZ/A1H, RZ/A1M */
> .compatible = "renesas,r7s72100-ports",
> .data = &rza1h_pmx_conf,
> },
> + {
> + /* RZ/A1L */
> + .compatible = "renesas,r7s72102-ports",
> + .data = &rza1l_pmx_conf,
> + },
> { }
> };
>
> --
> 2.14.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
