Re: [PATCH v3 12/12] ARM: dtsi: axp81x: set pinmux for GPIO0/1 when used as LDOs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Oct 3, 2017 at 4:42 AM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> On Mon, Oct 02, 2017 at 12:08:54PM +0000, Quentin Schulz wrote:
>> On AXP813/818, GPIO0 and GPIO1 can be used as LDO as (respectively)
>> ldo_io0 and ldo_io1.
>>
>> Let's add the pinctrl properties to the said regulators.
>>
>> Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/axp81x.dtsi | 14 ++++++++++++++
>>  1 file changed, 14 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
>> index f90f257130d5..099b0ddc1bbb 100644
>> --- a/arch/arm/boot/dts/axp81x.dtsi
>> +++ b/arch/arm/boot/dts/axp81x.dtsi
>> @@ -52,6 +52,16 @@
>>               compatible = "x-powers,axp813-gpio";
>>               gpio-controller;
>>               #gpio-cells = <2>;
>> +
>> +             gpio0_ldo: gpio0_ldo {
>> +                     pins = "GPIO0";
>> +                     function = "ldo";
>> +             };
>> +
>> +             gpio1_ldo: gpio1_ldo {
>> +                     pins = "GPIO1";
>> +                     function = "ldo";
>> +             };
>
> The node names are not supposed to contain any hyphens.

Hmm, I was under the impression that hyphens were preferred in
node names, and a warning would be added to dtc later on.
I might be wrong though.

ChenYu
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux