The sensor protocol provides functions to manage platform sensors, and provides the commands to describe the protocol version and the various attribute flags. It also provides commands to discover various sensors implemented and managed by the platform, read any sensor synchronously or asynchronously as allowed by the platform, program sensor attributes and/or configurations, if applicable. This patch adds support for most of the above features. Cc: Arnd Bergmann <arnd@xxxxxxxx> Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx> --- drivers/firmware/arm_scmi/Makefile | 2 +- drivers/firmware/arm_scmi/sensors.c | 287 ++++++++++++++++++++++++++++++++++++ include/linux/scmi_protocol.h | 41 ++++++ 3 files changed, 329 insertions(+), 1 deletion(-) create mode 100644 drivers/firmware/arm_scmi/sensors.c diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile index 52ecc08556a2..f9dee5ad0aa0 100644 --- a/drivers/firmware/arm_scmi/Makefile +++ b/drivers/firmware/arm_scmi/Makefile @@ -1,2 +1,2 @@ obj-$(CONFIG_ARM_SCMI_PROTOCOL) = arm_scmi.o -arm_scmi-y = base.o clock.o driver.o perf.o power.o +arm_scmi-y = base.o clock.o driver.o perf.o power.o sensors.o diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c new file mode 100644 index 000000000000..c868ccb7d6a3 --- /dev/null +++ b/drivers/firmware/arm_scmi/sensors.c @@ -0,0 +1,287 @@ +/* + * System Control and Management Interface (SCMI) Sensor Protocol + * + * Copyright (C) 2017 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "common.h" + +enum scmi_sensor_protocol_cmd { + SENSOR_DESCRIPTION_GET = 0x3, + SENSOR_CONFIG_SET = 0x4, + SENSOR_TRIP_POINT_SET = 0x5, + SENSOR_READING_GET = 0x6, +}; + +struct scmi_msg_resp_sensor_attributes { + __le16 num_sensors; + u8 max_requests; + u8 reserved; + __le32 reg_addr_low; + __le32 reg_addr_high; + __le32 reg_size; +}; + +struct scmi_msg_resp_sensor_description { + __le16 num_returned; + __le16 num_remaining; + struct { + __le32 id; + __le32 attributes_low; +#define SUPPORTS_ASYNC_READ(x) ((x) & BIT(31)) +#define NUM_TRIP_POINTS(x) (((x) >> 4) & 0xff) + __le32 attributes_high; +#define SENSOR_TYPE(x) ((x) & 0xff) +#define SENSOR_SCALE(x) (((x) >> 11) & 0x3f) +#define SENSOR_UPDATE_SCALE(x) (((x) >> 22) & 0x1f) +#define SENSOR_UPDATE_BASE(x) (((x) >> 27) & 0x1f) + u8 name[SCMI_MAX_STR_SIZE]; + } desc[0]; +}; + +struct scmi_msg_set_sensor_config { + __le32 id; + __le32 event_control; +}; + +struct scmi_msg_set_sensor_trip_point { + __le32 id; + __le32 event_control; +#define SENSOR_TP_EVENT_MASK (0x3) +#define SENSOR_TP_DISABLED 0x0 +#define SENSOR_TP_POSITIVE 0x1 +#define SENSOR_TP_NEGATIVE 0x2 +#define SENSOR_TP_BOTH 0x3 +#define SENSOR_TP_ID(x) (((x) & 0xff) << 4) + __le32 value_low; + __le32 value_high; +}; + +struct scmi_msg_sensor_reading_get { + __le32 id; + __le32 flags; +#define SENSOR_READ_ASYNC BIT(0) +}; + +struct sensors_info { + int num_sensors; + int max_requests; + u64 reg_addr; + u32 reg_size; + struct scmi_sensor_info *sensors; +}; + +static struct sensors_info sensor_info; + +static int scmi_sensor_attributes_get(const struct scmi_handle *handle, + struct sensors_info *sensor_info) +{ + int ret; + struct scmi_xfer *t; + struct scmi_msg_resp_sensor_attributes *attr; + + ret = scmi_one_xfer_init(handle, PROTOCOL_ATTRIBUTES, + SCMI_PROTOCOL_SENSOR, 0, sizeof(*attr), &t); + if (ret) + return ret; + + attr = t->rx.buf; + + ret = scmi_do_xfer(handle, t); + if (!ret) { + sensor_info->num_sensors = le16_to_cpu(attr->num_sensors); + sensor_info->max_requests = attr->max_requests; + sensor_info->reg_addr = le32_to_cpu(attr->reg_addr_low) | + (u64)le32_to_cpu(attr->reg_addr_high) << 32; + sensor_info->reg_size = le32_to_cpu(attr->reg_size); + } + + scmi_one_xfer_put(handle, t); + return ret; +} + +static int scmi_sensor_description_get(const struct scmi_handle *handle) +{ + int ret, cnt; + u32 desc_index = 0; + u16 num_returned, num_remaining; + struct scmi_xfer *t; + struct scmi_msg_resp_sensor_description *buf; + + ret = scmi_one_xfer_init(handle, SENSOR_DESCRIPTION_GET, + SCMI_PROTOCOL_SENSOR, sizeof(__le32), 0, &t); + if (ret) + return ret; + + buf = t->rx.buf; + + do { + /* Set the number of sensors to be skipped/already read */ + *(__le32 *)t->tx.buf = cpu_to_le32(desc_index); + + ret = scmi_do_xfer(handle, t); + if (ret) + break; + + num_returned = le16_to_cpu(buf->num_returned); + num_remaining = le16_to_cpu(buf->num_remaining); + + if (desc_index + num_returned > sensor_info.num_sensors) { + dev_err(handle->dev, "No. of sensors can't exceed %d", + sensor_info.num_sensors); + break; + } + + for (cnt = 0; cnt < num_returned; cnt++) { + u32 attrh; + struct scmi_sensor_info *s; + + attrh = le32_to_cpu(buf->desc[cnt].attributes_high); + s = &sensor_info.sensors[desc_index + cnt]; + s->id = le32_to_cpu(buf->desc[cnt].id); + s->type = SENSOR_TYPE(attrh); + memcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE); + } + + desc_index += num_returned; + /* + * check for both returned and remaining to avoid infinite + * loop due to buggy firmware + */ + } while (num_returned && num_remaining); + + scmi_one_xfer_put(handle, t); + return ret; +} + +static int +scmi_sensor_configuration_set(const struct scmi_handle *handle, u32 sensor_id) +{ + int ret; + u32 evt_cntl = BIT(0); + struct scmi_xfer *t; + struct scmi_msg_set_sensor_config *cfg; + + ret = scmi_one_xfer_init(handle, SENSOR_CONFIG_SET, + SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t); + if (ret) + return ret; + + cfg = t->tx.buf; + cfg->id = cpu_to_le32(sensor_id); + cfg->event_control = cpu_to_le32(evt_cntl); + + ret = scmi_do_xfer(handle, t); + + scmi_one_xfer_put(handle, t); + return ret; +} + +static int scmi_sensor_trip_point_set(const struct scmi_handle *handle, + u32 sensor_id, u8 trip_id, u64 trip_value) +{ + int ret; + u32 evt_cntl = SENSOR_TP_BOTH; + struct scmi_xfer *t; + struct scmi_msg_set_sensor_trip_point *trip; + + ret = scmi_one_xfer_init(handle, SENSOR_TRIP_POINT_SET, + SCMI_PROTOCOL_SENSOR, sizeof(*trip), 0, &t); + if (ret) + return ret; + + trip = t->tx.buf; + trip->id = cpu_to_le32(sensor_id); + trip->event_control = cpu_to_le32(evt_cntl | SENSOR_TP_ID(trip_id)); + trip->value_low = cpu_to_le32(trip_value & 0xffffffff); + trip->value_high = cpu_to_le32(trip_value >> 32); + + ret = scmi_do_xfer(handle, t); + + scmi_one_xfer_put(handle, t); + return ret; +} + +static int scmi_sensor_reading_get(const struct scmi_handle *handle, + u32 sensor_id, bool async, u64 *value) +{ + int ret; + struct scmi_xfer *t; + struct scmi_msg_sensor_reading_get *sensor; + + ret = scmi_one_xfer_init(handle, SENSOR_READING_GET, + SCMI_PROTOCOL_SENSOR, sizeof(*sensor), + sizeof(u64), &t); + if (ret) + return ret; + + sensor = t->tx.buf; + sensor->id = cpu_to_le32(sensor_id); + sensor->flags = cpu_to_le32(async ? SENSOR_READ_ASYNC : 0); + + ret = scmi_do_xfer(handle, t); + if (!ret) { + __le32 *pval = t->rx.buf; + + *value = le32_to_cpu(*pval); + *value |= (u64)le32_to_cpu(*(pval + 1)) << 32; + } + + scmi_one_xfer_put(handle, t); + return ret; +} + +static const struct scmi_sensor_info * +scmi_sensor_info_get(const struct scmi_handle *handle, u32 sensor_id) +{ + return sensor_info.sensors + sensor_id; +} + +static int scmi_sensor_count_get(const struct scmi_handle *handle) +{ + return sensor_info.num_sensors; +} + +static struct scmi_sensor_ops sensor_ops = { + .count_get = scmi_sensor_count_get, + .info_get = scmi_sensor_info_get, + .configuration_set = scmi_sensor_configuration_set, + .trip_point_set = scmi_sensor_trip_point_set, + .reading_get = scmi_sensor_reading_get, +}; + +int scmi_sensors_protocol_init(struct scmi_handle *handle) +{ + u32 version; + + scmi_version_get(handle, SCMI_PROTOCOL_SENSOR, &version); + + dev_dbg(handle->dev, "Sensor Version %d.%d\n", + PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version)); + + scmi_sensor_attributes_get(handle, &sensor_info); + + sensor_info.sensors = devm_kcalloc(handle->dev, sensor_info.num_sensors, + sizeof(struct scmi_sensor_info), + GFP_KERNEL); + if (!sensor_info.sensors) + return -ENOMEM; + + scmi_sensor_description_get(handle); + + handle->sensor_ops = &sensor_ops; + + return 0; +} diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h index e5a80511f88c..5e29394b5cc9 100644 --- a/include/linux/scmi_protocol.h +++ b/include/linux/scmi_protocol.h @@ -136,6 +136,45 @@ struct scmi_power_ops { int (*state_notify_enable)(const struct scmi_handle *, u32, bool); }; +struct scmi_sensor_info { + u32 id; + u8 type; + char name[SCMI_MAX_STR_SIZE]; +}; + +/* + * Partial list from Distributed Management Task Force (DMTF) specification: + * DSP0249 (Platform Level Data Model specification) + */ +enum scmi_sensor_class { + NONE = 0x0, + TEMPERATURE_C = 0x2, + VOLTAGE = 0x5, + CURRENT = 0x6, + POWER = 0x7, + ENERGY = 0x8, +}; + +/** + * struct scmi_sensor_ops - represents the various operations provided + * by SCMI Sensor Protocol + * + * @count_get: get the count of sensors provided by SCMI + * @info_get: get the information of the specified sensor + * @configuration_set: control notifications on cross-over events for + * the trip-points + * @trip_point_set: selects and configures a trip-point of interest + * @reading_get: gets the current value of the sensor + */ +struct scmi_sensor_ops { + int (*count_get)(const struct scmi_handle *); + const struct scmi_sensor_info *(*info_get)(const struct scmi_handle *, + u32); + int (*configuration_set)(const struct scmi_handle *, u32); + int (*trip_point_set)(const struct scmi_handle *, u32, u8, u64); + int (*reading_get)(const struct scmi_handle *, u32, bool, u64 *); +}; + /** * struct scmi_handle - Handle returned to ARM SCMI clients for usage. * @@ -144,6 +183,7 @@ struct scmi_power_ops { * @power_ops: pointer to set of power protocol operations * @perf_ops: pointer to set of performance protocol operations * @clk_ops: pointer to set of clock protocol operations + * @sensor_ops: pointer to set of sensor protocol operations */ struct scmi_handle { struct device *dev; @@ -151,6 +191,7 @@ struct scmi_handle { struct scmi_power_ops *power_ops; struct scmi_perf_ops *perf_ops; struct scmi_clk_ops *clk_ops; + struct scmi_sensor_ops *sensor_ops; }; #if IS_REACHABLE(CONFIG_ARM_SCMI_PROTOCOL) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
