- Shorten size of reg property so it covers only the implemented
registers
- Add VUART compatible
- Move stray uart1 in g5 definition
- Remove outdated current-speed property. Different bootloaders use
different speeds, so this is no longer helpful
Signed-off-by: Joel Stanley <joel@xxxxxxxxx>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 17 +++++++++--------
arch/arm/boot/dts/aspeed-g5.dtsi | 36 ++++++++++++++++++------------------
2 files changed, 27 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 191c33d18122..7a4a53666d70 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -27,6 +27,7 @@
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
+ serial5 = &vuart;
};
cpus {
@@ -199,7 +200,7 @@
uart1: serial@1e783000 {
compatible = "ns16550a";
- reg = <0x1e783000 0x1000>;
+ reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
clocks = <&clk_uart>;
@@ -209,7 +210,7 @@
uart2: serial@1e78d000 {
compatible = "ns16550a";
- reg = <0x1e78d000 0x1000>;
+ reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
clocks = <&clk_uart>;
@@ -219,7 +220,7 @@
uart3: serial@1e78e000 {
compatible = "ns16550a";
- reg = <0x1e78e000 0x1000>;
+ reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
clocks = <&clk_uart>;
@@ -229,7 +230,7 @@
uart4: serial@1e78f000 {
compatible = "ns16550a";
- reg = <0x1e78f000 0x1000>;
+ reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
clocks = <&clk_uart>;
@@ -239,7 +240,7 @@
uart5: serial@1e784000 {
compatible = "ns16550a";
- reg = <0x1e784000 0x1000>;
+ reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
@@ -248,9 +249,9 @@
status = "disabled";
};
- uart6: serial@1e787000 {
- compatible = "ns16550a";
- reg = <0x1e787000 0x1000>;
+ vuart: vuart@1e787000 {
+ compatible = "aspeed,ast2400-vuart";
+ reg = <0x1e787000 0x40>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 251fc9f4637e..0b793305120a 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -27,6 +27,7 @@
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
+ serial5 = &vuart;
};
cpus {
@@ -247,16 +248,6 @@
status = "disabled";
};
- uart1: serial@1e783000 {
- compatible = "ns16550a";
- reg = <0x1e783000 0x1000>;
- reg-shift = <2>;
- interrupts = <9>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
-
lpc: lpc@1e789000 {
compatible = "aspeed,ast2500-lpc", "simple-mfd";
reg = <0x1e789000 0x1000>;
@@ -287,9 +278,19 @@
};
};
+ uart1: serial@1e783000 {
+ compatible = "ns16550a";
+ reg = <0x1e783000 0x20>;
+ reg-shift = <2>;
+ interrupts = <9>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
- reg = <0x1e78d000 0x1000>;
+ reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
clocks = <&clk_uart>;
@@ -299,7 +300,7 @@
uart3: serial@1e78e000 {
compatible = "ns16550a";
- reg = <0x1e78e000 0x1000>;
+ reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
clocks = <&clk_uart>;
@@ -309,7 +310,7 @@
uart4: serial@1e78f000 {
compatible = "ns16550a";
- reg = <0x1e78f000 0x1000>;
+ reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
clocks = <&clk_uart>;
@@ -319,18 +320,17 @@
uart5: serial@1e784000 {
compatible = "ns16550a";
- reg = <0x1e784000 0x1000>;
+ reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
- current-speed = <38400>;
no-loopback-test;
status = "disabled";
};
- uart6: serial@1e787000 {
- compatible = "ns16550a";
- reg = <0x1e787000 0x1000>;
+ vuart: vuart@1e787000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787000 0x40>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
