There are mcu_bus and dma_bus clocks needed to be turned on/off by
driver on some SoCs, so add them as optional ones
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
drivers/usb/mtu3/mtu3.h | 5 ++
drivers/usb/mtu3/mtu3_plat.c | 121 ++++++++++++++++++++++++++++--------------
2 files changed, 86 insertions(+), 40 deletions(-)
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index 6d3278e..2795294 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -206,6 +206,9 @@ struct otg_switch_mtk {
* @ippc_base: register base address of IP Power and Clock interface (IPPC)
* @vusb33: usb3.3V shared by device/host IP
* @sys_clk: system clock of mtu3, shared by device/host IP
+ * @ref_clk: reference clock
+ * @mcu_clk: mcu_bus_ck clock for AHB bus etc
+ * @dma_clk: dma_bus_ck clock for AXI bus etc
* @dr_mode: works in which mode:
* host only, device only or dual-role mode
* @u2_ports: number of usb2.0 host ports
@@ -226,6 +229,8 @@ struct ssusb_mtk {
struct regulator *vusb33;
struct clk *sys_clk;
struct clk *ref_clk;
+ struct clk *mcu_clk;
+ struct clk *dma_clk;
/* otg */
struct otg_switch_mtk otg_switch;
enum usb_dr_mode dr_mode;
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 9edad30..fb89920 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -110,15 +110,9 @@ static void ssusb_phy_power_off(struct ssusb_mtk *ssusb)
phy_power_off(ssusb->phys[i]);
}
-static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
+static int ssusb_clks_enable(struct ssusb_mtk *ssusb)
{
- int ret = 0;
-
- ret = regulator_enable(ssusb->vusb33);
- if (ret) {
- dev_err(ssusb->dev, "failed to enable vusb33\n");
- goto vusb33_err;
- }
+ int ret;
ret = clk_prepare_enable(ssusb->sys_clk);
if (ret) {
@@ -132,6 +126,52 @@ static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
goto ref_clk_err;
}
+ ret = clk_prepare_enable(ssusb->mcu_clk);
+ if (ret) {
+ dev_err(ssusb->dev, "failed to enable mcu_clk\n");
+ goto mcu_clk_err;
+ }
+
+ ret = clk_prepare_enable(ssusb->dma_clk);
+ if (ret) {
+ dev_err(ssusb->dev, "failed to enable dma_clk\n");
+ goto dma_clk_err;
+ }
+
+ return 0;
+
+dma_clk_err:
+ clk_disable_unprepare(ssusb->mcu_clk);
+mcu_clk_err:
+ clk_disable_unprepare(ssusb->ref_clk);
+ref_clk_err:
+ clk_disable_unprepare(ssusb->sys_clk);
+sys_clk_err:
+ return ret;
+}
+
+static void ssusb_clks_disable(struct ssusb_mtk *ssusb)
+{
+ clk_disable_unprepare(ssusb->dma_clk);
+ clk_disable_unprepare(ssusb->mcu_clk);
+ clk_disable_unprepare(ssusb->ref_clk);
+ clk_disable_unprepare(ssusb->sys_clk);
+}
+
+static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
+{
+ int ret = 0;
+
+ ret = regulator_enable(ssusb->vusb33);
+ if (ret) {
+ dev_err(ssusb->dev, "failed to enable vusb33\n");
+ goto vusb33_err;
+ }
+
+ ret = ssusb_clks_enable(ssusb);
+ if (ret)
+ goto clks_err;
+
ret = ssusb_phy_init(ssusb);
if (ret) {
dev_err(ssusb->dev, "failed to init phy\n");
@@ -149,20 +189,16 @@ static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
phy_err:
ssusb_phy_exit(ssusb);
phy_init_err:
- clk_disable_unprepare(ssusb->ref_clk);
-ref_clk_err:
- clk_disable_unprepare(ssusb->sys_clk);
-sys_clk_err:
+ ssusb_clks_disable(ssusb);
+clks_err:
regulator_disable(ssusb->vusb33);
vusb33_err:
-
return ret;
}
static void ssusb_rscs_exit(struct ssusb_mtk *ssusb)
{
- clk_disable_unprepare(ssusb->sys_clk);
- clk_disable_unprepare(ssusb->ref_clk);
+ ssusb_clks_disable(ssusb);
regulator_disable(ssusb->vusb33);
ssusb_phy_power_off(ssusb);
ssusb_phy_exit(ssusb);
@@ -203,6 +239,19 @@ static int get_iddig_pinctrl(struct ssusb_mtk *ssusb)
return 0;
}
+/* ignore the error if the clock does not exist */
+static struct clk *get_optional_clk(struct device *dev, const char *id)
+{
+ struct clk *opt_clk;
+
+ opt_clk = devm_clk_get(dev, id);
+ /* ignore error number except EPROBE_DEFER */
+ if (IS_ERR(opt_clk) && (PTR_ERR(opt_clk) != -EPROBE_DEFER))
+ opt_clk = NULL;
+
+ return opt_clk;
+}
+
static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
{
struct device_node *node = pdev->dev.of_node;
@@ -225,18 +274,17 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
return PTR_ERR(ssusb->sys_clk);
}
- /*
- * reference clock is usually a "fixed-clock", make it optional
- * for backward compatibility and ignore the error if it does
- * not exist.
- */
- ssusb->ref_clk = devm_clk_get(dev, "ref_ck");
- if (IS_ERR(ssusb->ref_clk)) {
- if (PTR_ERR(ssusb->ref_clk) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
+ ssusb->ref_clk = get_optional_clk(dev, "ref_ck");
+ if (IS_ERR(ssusb->ref_clk))
+ return PTR_ERR(ssusb->ref_clk);
- ssusb->ref_clk = NULL;
- }
+ ssusb->mcu_clk = get_optional_clk(dev, "mcu_ck");
+ if (IS_ERR(ssusb->mcu_clk))
+ return PTR_ERR(ssusb->mcu_clk);
+
+ ssusb->dma_clk = get_optional_clk(dev, "dma_ck");
+ if (IS_ERR(ssusb->dma_clk))
+ return PTR_ERR(ssusb->dma_clk);
ssusb->num_phys = of_count_phandle_with_args(node,
"phys", "#phy-cells");
@@ -451,8 +499,7 @@ static int __maybe_unused mtu3_suspend(struct device *dev)
ssusb_host_disable(ssusb, true);
ssusb_phy_power_off(ssusb);
- clk_disable_unprepare(ssusb->sys_clk);
- clk_disable_unprepare(ssusb->ref_clk);
+ ssusb_clks_disable(ssusb);
ssusb_wakeup_enable(ssusb);
return 0;
@@ -470,27 +517,21 @@ static int __maybe_unused mtu3_resume(struct device *dev)
return 0;
ssusb_wakeup_disable(ssusb);
- ret = clk_prepare_enable(ssusb->sys_clk);
- if (ret)
- goto err_sys_clk;
-
- ret = clk_prepare_enable(ssusb->ref_clk);
+ ret = ssusb_clks_enable(ssusb);
if (ret)
- goto err_ref_clk;
+ goto clks_err;
ret = ssusb_phy_power_on(ssusb);
if (ret)
- goto err_power_on;
+ goto phy_err;
ssusb_host_enable(ssusb);
return 0;
-err_power_on:
- clk_disable_unprepare(ssusb->ref_clk);
-err_ref_clk:
- clk_disable_unprepare(ssusb->sys_clk);
-err_sys_clk:
+phy_err:
+ ssusb_clks_disable(ssusb);
+clks_err:
return ret;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
