From: Markus Mayer <mmayer@xxxxxxxxxxxx> This series adds the brcmstb AVS TMON driver. The driver was originally written by Brian Norris. Changes since v4: - disable trip points properly when needed; there was code left-over from an older iteration of this driver that used long ints, which resulted in code that was incorrect now that we are using ints - rebased on v4.14-rc1 - patches 3 & 4 (turning on CONFIG_BRCMSTB_THERMAL for arm/arm64) are no longer part of the series, because they were already picked up for 4.14 Changes since v3: - Rebased on v4.13-rc3 to resolve conflicts in the MAINTAINERS file Changes since v2: - replaced calls to pr_debug() with calls to dev_dbg() [PATCH 2/4 only] - all other patches are unchanged from v2 Changes since v1: - Fixed wording in binding document - Fixed lincensing to consistently mention GPL v2 - Use thermal_zone_get_slope() and thermal_zone_get_offset() - Some minor clean-ups Brian Norris (2): Documentation: devicetree: add binding for Broadcom STB AVS TMON thermal: add brcmstb AVS TMON driver .../devicetree/bindings/thermal/brcm,avs-tmon.txt | 20 ++ MAINTAINERS | 8 + drivers/thermal/Kconfig | 2 +- drivers/thermal/broadcom/Kconfig | 7 + drivers/thermal/broadcom/Makefile | 1 + drivers/thermal/broadcom/brcmstb_thermal.c | 387 +++++++++++++++++++++ 6 files changed, 424 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
