Re: [PATCH v5 1/8] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Mark,

>> +static void __init brcmstb_init_early(void)
>> +{
>> +       add_preferred_console("ttyS", 0, "115200");
>> +}
>
> Is this really required?

I think I can drop this. It was a holdover from our older kernels.

>> +       /*
>> +       * set the reset vector to point to the secondary_startup
>> +       * routine
>> +       */
>> +       cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
>> +
>> +       flush_cache_all();
>
> Why? What does the new CPU need before its caches are coherent and up?

Absolutely nothing! I should be able to drop this as well.

Regarding the CPU power-down sequence, I'll review it and make sure it follows the
"Processor power domain" sequence in the A15 TRM. For any deviations, I'll double-check
with our H/W designers to ensure there aren't any magic requirements unaccounted for.

Thank you for taking a deep-dive into the code! I'll make the appropriate modifications
per your suggestions.

Regards,
Marc C


On 01/24/2014 02:14 AM, Mark Rutland wrote:
> On Wed, Jan 22, 2014 at 03:30:45AM +0000, Marc Carino wrote:
>> The BCM7xxx series of Broadcom SoCs are used primarily in set-top boxes.
>>
>> This patch adds machine support for the ARM-based Broadcom SoCs.
>>
>> Signed-off-by: Marc Carino <marc.ceeeee@xxxxxxxxx>
>> Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
>> ---
>>  arch/arm/configs/multi_v7_defconfig |    1 +
>>  arch/arm/mach-bcm/Kconfig           |   14 ++
>>  arch/arm/mach-bcm/Makefile          |    4 +
>>  arch/arm/mach-bcm/brcmstb.c         |  110 ++++++++++++
>>  arch/arm/mach-bcm/brcmstb.h         |   38 ++++
>>  arch/arm/mach-bcm/headsmp-brcmstb.S |   34 ++++
>>  arch/arm/mach-bcm/hotplug-brcmstb.c |  334 +++++++++++++++++++++++++++++++++++
>>  7 files changed, 535 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/arm/mach-bcm/brcmstb.c
>>  create mode 100644 arch/arm/mach-bcm/brcmstb.h
>>  create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
>>  create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
>>
>> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
>> index c1df4e9..7028d11 100644
>> --- a/arch/arm/configs/multi_v7_defconfig
>> +++ b/arch/arm/configs/multi_v7_defconfig
>> @@ -7,6 +7,7 @@ CONFIG_MACH_ARMADA_370=y
>>  CONFIG_MACH_ARMADA_XP=y
>>  CONFIG_ARCH_BCM=y
>>  CONFIG_ARCH_BCM_MOBILE=y
>> +CONFIG_ARCH_BRCMSTB=y
>>  CONFIG_GPIO_PCA953X=y
>>  CONFIG_ARCH_HIGHBANK=y
>>  CONFIG_ARCH_KEYSTONE=y
>> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
>> index 9fe6d88..2c1ae83 100644
>> --- a/arch/arm/mach-bcm/Kconfig
>> +++ b/arch/arm/mach-bcm/Kconfig
>> @@ -31,6 +31,20 @@ config ARCH_BCM_MOBILE
>>           BCM11130, BCM11140, BCM11351, BCM28145 and
>>           BCM28155 variants.
>>
>> +config ARCH_BRCMSTB
>> +       bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
>> +       depends on MMU
>> +       select ARM_GIC
>> +       select MIGHT_HAVE_PCI
>> +       select HAVE_SMP
>> +       select HAVE_ARM_ARCH_TIMER
>> +       help
>> +         Say Y if you intend to run the kernel on a Broadcom ARM-based STB
>> +         chipset.
>> +
>> +         This enables support for Broadcom ARM-based set-top box chipsets,
>> +         including the 7445 family of chips.
>> +
>>  endmenu
>>
>>  endif
>> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
>> index c2ccd5a..b744a12 100644
>> --- a/arch/arm/mach-bcm/Makefile
>> +++ b/arch/arm/mach-bcm/Makefile
>> @@ -13,3 +13,7 @@
>>  obj-$(CONFIG_ARCH_BCM_MOBILE)  := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
>>  plus_sec := $(call as-instr,.arch_extension sec,+sec)
>>  AFLAGS_bcm_kona_smc_asm.o      :=-Wa,-march=armv7-a$(plus_sec)
>> +
>> +obj-$(CONFIG_ARCH_BRCMSTB)     := brcmstb.o
>> +obj-$(CONFIG_SMP)              += headsmp-brcmstb.o
>> +obj-$(CONFIG_HOTPLUG_CPU)      += hotplug-brcmstb.o
>> diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
>> new file mode 100644
>> index 0000000..7a6093d
>> --- /dev/null
>> +++ b/arch/arm/mach-bcm/brcmstb.c
>> @@ -0,0 +1,110 @@
>> +/*
>> + * Copyright (C) 2013 Broadcom Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/console.h>
>> +#include <linux/clocksource.h>
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/errno.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/printk.h>
>> +#include <linux/smp.h>
>> +
>> +#include <asm/cacheflush.h>
>> +#include <asm/mach-types.h>
>> +#include <asm/mach/arch.h>
>> +#include <asm/mach/map.h>
>> +#include <asm/mach/time.h>
>> +
>> +#include "brcmstb.h"
>> +
>> +/***********************************************************************
>> + * STB CPU (main application processor)
>> + ***********************************************************************/
>> +
>> +static const char *brcmstb_match[] __initconst = {
>> +       "brcm,bcm7445",
>> +       "brcm,brcmstb",
>> +       NULL
>> +};
>> +
>> +static void __init brcmstb_init_early(void)
>> +{
>> +       add_preferred_console("ttyS", 0, "115200");
>> +}
> 
> Is this really required?
> 
>> +
>> +/***********************************************************************
>> + * SMP boot
>> + ***********************************************************************/
>> +
>> +#ifdef CONFIG_SMP
>> +static DEFINE_SPINLOCK(boot_lock);
>> +
>> +static void __cpuinit brcmstb_secondary_init(unsigned int cpu)
>> +{
>> +       /*
>> +        * Synchronise with the boot thread.
>> +        */
>> +       spin_lock(&boot_lock);
>> +       spin_unlock(&boot_lock);
>> +}
>> +
>> +static int __cpuinit brcmstb_boot_secondary(unsigned int cpu,
>> +                                           struct task_struct *idle)
>> +{
>> +       /*
>> +        * set synchronisation state between this boot processor
>> +        * and the secondary one
>> +        */
>> +       spin_lock(&boot_lock);
>> +
>> +       /* Bring up power to the core if necessary */
>> +       if (brcmstb_cpu_get_power_state(cpu) == 0)
>> +               brcmstb_cpu_power_on(cpu);
>> +
>> +       brcmstb_cpu_boot(cpu);
>> +
>> +       /*
>> +        * now the secondary core is starting up let it run its
>> +        * calibrations, then wait for it to finish
>> +        */
>> +       spin_unlock(&boot_lock);
>> +
>> +       return 0;
>> +}
>> +
>> +struct smp_operations brcmstb_smp_ops __initdata = {
>> +       .smp_prepare_cpus       = brcmstb_cpu_ctrl_setup,
>> +       .smp_secondary_init     = brcmstb_secondary_init,
>> +       .smp_boot_secondary     = brcmstb_boot_secondary,
>> +#ifdef CONFIG_HOTPLUG_CPU
>> +       .cpu_kill               = brcmstb_cpu_kill,
>> +       .cpu_die                = brcmstb_cpu_die,
>> +#endif
>> +};
>> +#endif
>> +
>> +DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
>> +       .dt_compat      = brcmstb_match,
>> +#ifdef CONFIG_SMP
>> +       .smp            = smp_ops(brcmstb_smp_ops),
>> +#endif
>> +       .init_early     = brcmstb_init_early,
>> +MACHINE_END
>> diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h
>> new file mode 100644
>> index 0000000..e49bde6
>> --- /dev/null
>> +++ b/arch/arm/mach-bcm/brcmstb.h
>> @@ -0,0 +1,38 @@
>> +/*
>> + * Copyright (C) 2013 Broadcom Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __BRCMSTB_H__
>> +#define __BRCMSTB_H__
>> +
>> +#if !defined(__ASSEMBLY__)
>> +#include <linux/smp.h>
>> +#endif
>> +
>> +#if !defined(__ASSEMBLY__)
>> +extern void brcmstb_secondary_startup(void);
>> +extern void brcmstb_cpu_boot(unsigned int cpu);
>> +extern void brcmstb_cpu_power_on(unsigned int cpu);
>> +extern int brcmstb_cpu_get_power_state(unsigned int cpu);
>> +extern struct smp_operations brcmstb_smp_ops;
>> +#if defined(CONFIG_HOTPLUG_CPU)
>> +extern void brcmstb_cpu_die(unsigned int cpu);
>> +extern int brcmstb_cpu_kill(unsigned int cpu);
>> +void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus);
>> +#else
>> +static inline void brcmstb_cpu_die(unsigned int cpu) {}
>> +static inline int brcmstb_cpu_kill(unsigned int cpu) {}
>> +static inline void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) {}
>> +#endif
>> +#endif
>> +
>> +#endif /* __BRCMSTB_H__ */
>> diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S
>> new file mode 100644
>> index 0000000..57ec438
>> --- /dev/null
>> +++ b/arch/arm/mach-bcm/headsmp-brcmstb.S
>> @@ -0,0 +1,34 @@
>> +/*
>> + * SMP boot code for secondary CPUs
>> + * Based on arch/arm/mach-tegra/headsmp.S
>> + *
>> + * Copyright (C) 2010 NVIDIA, Inc.
>> + * Copyright (C) 2013 Broadcom Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <asm/assembler.h>
>> +#include <linux/linkage.h>
>> +#include <linux/init.h>
>> +
>> +        .section ".text.head", "ax"
>> +       __CPUINIT
> 
> __CPUINIT is either going or gone by now. This should disappear.
> 
>> +
>> +ENTRY(brcmstb_secondary_startup)
>> +        /*
>> +         * Ensure CPU is in a sane state by disabling all IRQs and switching
>> +         * into SVC mode.
>> +         */
>> +        setmode        PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
>> +
>> +        bl      v7_invalidate_l1
>> +        b       secondary_startup
>> +ENDPROC(brcmstb_secondary_startup)
>> diff --git a/arch/arm/mach-bcm/hotplug-brcmstb.c b/arch/arm/mach-bcm/hotplug-brcmstb.c
>> new file mode 100644
>> index 0000000..ff4a732
>> --- /dev/null
>> +++ b/arch/arm/mach-bcm/hotplug-brcmstb.c
>> @@ -0,0 +1,334 @@
>> +/*
>> + * Broadcom STB CPU hotplug support for ARM
>> + *
>> + * Copyright (C) 2013 Broadcom Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/errno.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/printk.h>
>> +#include <linux/regmap.h>
>> +#include <linux/smp.h>
>> +#include <linux/mfd/syscon.h>
>> +
>> +#include <asm/cacheflush.h>
>> +#include <asm/mach-types.h>
>> +
>> +#include "brcmstb.h"
>> +
>> +enum {
>> +       ZONE_MAN_CLKEN_MASK             = BIT(0),
>> +       ZONE_MAN_RESET_CNTL_MASK        = BIT(1),
>> +       ZONE_MAN_MEM_PWR_MASK           = BIT(4),
>> +       ZONE_RESERVED_1_MASK            = BIT(5),
>> +       ZONE_MAN_ISO_CNTL_MASK          = BIT(6),
>> +       ZONE_MANUAL_CONTROL_MASK        = BIT(7),
>> +       ZONE_PWR_DN_REQ_MASK            = BIT(9),
>> +       ZONE_PWR_UP_REQ_MASK            = BIT(10),
>> +       ZONE_BLK_RST_ASSERT_MASK        = BIT(10),
>> +       ZONE_PWR_OFF_STATE_MASK         = BIT(26),
>> +       ZONE_PWR_ON_STATE_MASK          = BIT(26),
>> +       ZONE_DPG_PWR_STATE_MASK         = BIT(28),
>> +       ZONE_MEM_PWR_STATE_MASK         = BIT(29),
>> +       ZONE_RESET_STATE_MASK           = BIT(31),
>> +};
>> +
>> +static void __iomem *cpubiuctrl_block;
>> +static void __iomem *hif_cont_block;
>> +static u32 cpu0_pwr_zone_ctrl_reg;
>> +static u32 cpu_rst_cfg_reg;
>> +static u32 hif_cont_reg;
>> +DEFINE_PER_CPU(int, per_cpu_sw_state);
>> +
>> +static void __iomem *pwr_ctrl_get_base(unsigned int cpu)
>> +{
>> +       void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
>> +       base += (cpu * 4);
> 
> CPU isn't guaranteed to be the physical CPU ID (MPIDR.Aff*). While it
> almost certainly will be, we can't guarantee it in the face of a kexec,
> for example.
> 
> You can use cpu_logical_map(cpu) to get the physical ID.
> 
>> +       return base;
>> +}
>> +
>> +static u32 pwr_ctrl_rd(unsigned int cpu)
>> +{
>> +       void __iomem *base = pwr_ctrl_get_base(cpu);
>> +       return readl_relaxed(base);
>> +}
>> +
>> +static void pwr_ctrl_wr(unsigned int cpu, u32 val)
>> +{
>> +       void __iomem *base = pwr_ctrl_get_base(cpu);
>> +       writel(val, base);
>> +}
>> +
>> +static void cpu_rst_cfg_set(int cpu, int set)
>> +{
>> +       u32 val;
>> +       val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
>> +       if (set)
>> +               val |= BIT(cpu);
>> +       else
>> +               val &= ~BIT(cpu);
> 
> Likewise here.
> 
>> +       writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
>> +}
>> +
>> +static void cpu_set_boot_addr(int cpu, unsigned long boot_addr)
>> +{
>> +       const int reg_ofs = cpu * 8;
> 
> And here.
> 
>> +       writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
>> +       writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
>> +}
>> +
>> +void brcmstb_cpu_boot(unsigned int cpu)
>> +{
>> +       pr_info("SMP: Booting CPU%d...\n", cpu);
>> +
>> +       /*
>> +       * set the reset vector to point to the secondary_startup
>> +       * routine
>> +       */
>> +       cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
>> +
>> +       flush_cache_all();
> 
> Why? What does the new CPU need before its caches are coherent and up?
> 
>> +
>> +       /* unhalt the cpu */
>> +       cpu_rst_cfg_set(cpu, 0);
>> +}
>> +
>> +void brcmstb_cpu_power_on(unsigned int cpu)
>> +{
>> +       /*
>> +        * The secondary cores power was cut, so we must go through
>> +        * power-on initialization.
>> +        */
>> +       u32 tmp;
>> +
>> +       pr_info("SMP: Powering up CPU%d...\n", cpu);
>> +
>> +       /* Request zone power up */
>> +       pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK);
>> +
>> +       /* Wait for the power up FSM to complete */
>> +       do {
>> +               tmp = pwr_ctrl_rd(cpu);
>> +       } while (!(tmp & ZONE_PWR_ON_STATE_MASK));
>> +
>> +       per_cpu(per_cpu_sw_state, cpu) = 1;
>> +}
>> +
>> +int brcmstb_cpu_get_power_state(unsigned int cpu)
>> +{
>> +       int tmp = pwr_ctrl_rd(cpu);
>> +       return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
>> +}
>> +
>> +void __ref brcmstb_cpu_die(unsigned int cpu)
>> +{
>> +       /* Derived from misc_bpcm_arm.c */
>> +
>> +       /* Clear SCTLR.C bit */
>> +       __asm__(
>> +               "mrc    p15, 0, r0, c1, c0, 0\n"
>> +               "bic    r0, r0, #(1 << 2)\n"
>> +               "mcr    p15, 0, r0, c1, c0, 0\n"
>> +               : /* no output */
>> +               : /* no input */
>> +               : "r0"  /* clobber r0 */
>> +       );
> 
> This is odd. Why not allow GCC to allocate the register?
> 
>> +
>> +       /*
>> +        * Instruction barrier to ensure cache is really disabled before
>> +        * cleaning/invalidating the caches
>> +        */
>> +       isb();
> 
> I think you could use:
> 
> set_cr(get_cr() & ~CR_C))
> 
> Which would do all of the above (including the isb), and will get GCC to
> allocate the register.
> 
>> +
>> +       flush_cache_all();
>> +
>> +       /* Invalidate all instruction caches to PoU (ICIALLU) */
>> +       /* Data sync. barrier to ensure caches have emptied out */
>> +       __asm__("mcr    p15, 0, r0, c7, c5, 0\n" : : : "r0");
>> +       dsb();
> 
> Why do you need to invalidate the I-cache?
> 
>> +
>> +       /*
>> +        * Clear ACTLR.SMP bit to prevent broadcast TLB messages from reaching
>> +        * this core
>> +        */
>> +       __asm__(
>> +               "mrc    p15, 0, r0, c1, c0, 1\n"
>> +               "bic    r0, r0, #(1 << 6)\n"
>> +               "mcr    p15, 0, r0, c1, c0, 1\n"
>> +               : /* no output */
>> +               : /* no input */
>> +               : "r0"  /* clobber r0 */
>> +       );
> 
> Surely you can use an output operand to get GCC to allocate the register
> for you?
> 
>> +
>> +       /* Disable all IRQs for this CPU */
>> +       arch_local_irq_disable();
>> +
>> +       per_cpu(per_cpu_sw_state, cpu) = 0;
> 
> Your caches are off at this point, so this could be going straight to
> memory. Yet readers of this value aren't cleaning their caches before
> reading this, so they could hit a stale cached copy.
> 
>> +
>> +       /*
>> +        * Final full barrier to ensure everything before this instruction has
>> +        * quiesced.
>> +        */
>> +       isb();
>> +       dsb();
>> +
>> +       /* Sit and wait to die */
>> +       wfi();
>> +
>> +       /* We should never get here... */
>> +       nop();
> 
> Why the nop first?
> 
>> +       panic("Spurious interrupt on CPU %d received!\n", cpu);
>> +}
>> +
>> +int brcmstb_cpu_kill(unsigned int cpu)
>> +{
>> +       u32 tmp;
>> +
>> +       pr_info("SMP: Powering down CPU%d...\n", cpu);
>> +
>> +       while (per_cpu(per_cpu_sw_state, cpu))
>> +               ;
> 
> As this was written to with caches disabled, the cached copy of the
> value (which this is reading) could be stale. Surely you need to
> clean+invalidate the line for this value each time you read it to give
> it a chance to update?
> 
>> +
>> +       /* Program zone reset */
>> +       pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK |
>> +                             ZONE_PWR_DN_REQ_MASK);
>> +
>> +       /* Verify zone reset */
>> +       tmp = pwr_ctrl_rd(cpu);
>> +       if (!(tmp & ZONE_RESET_STATE_MASK))
>> +               pr_err("%s: Zone reset bit for CPU %d not asserted!\n",
>> +                       __func__, cpu);
>> +
>> +       /* Wait for power down */
>> +       do {
>> +               tmp = pwr_ctrl_rd(cpu);
>> +       } while (!(tmp & ZONE_PWR_OFF_STATE_MASK));
>> +
>> +       /* Settle-time from Broadcom-internal DVT reference code */
>> +       udelay(7);
>> +
>> +       /* Assert reset on the CPU */
>> +       cpu_rst_cfg_set(cpu, 1);
>> +
>> +       return 1;
>> +}
>> +
>> +static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
>> +{
>> +       int rc = 0;
>> +       char *name;
>> +       int index;
>> +       struct device_node *syscon_np = NULL;
>> +
>> +       name = "syscon-cpu";
>> +
>> +       syscon_np = of_parse_phandle(np, name, 0);
>> +       if (!syscon_np) {
>> +               pr_err("can't find phandle %s\n", name);
>> +               rc = -EINVAL;
>> +               goto cleanup;
>> +       }
>> +
>> +       cpubiuctrl_block = of_iomap(syscon_np, 0);
>> +       if (!cpubiuctrl_block) {
>> +               pr_err("iomap failed for cpubiuctrl_block\n");
>> +               rc = -EINVAL;
>> +               goto cleanup;
>> +       }
>> +
>> +       index = 1;
>> +       rc = of_property_read_u32_index(np, name, index,
>> +                                       &cpu0_pwr_zone_ctrl_reg);
> 
> The index variable seems rather pointless. Why not just use the value
> in-place?
> 
>> +       if (rc) {
>> +               pr_err("failed to read %d from %s property (%d)\n", index, name,
>> +                       rc);
> 
> It might be better to state _what_ you're looking for (what does the
> value represent?).
> 
>> +               rc = -EINVAL;
>> +               goto cleanup;
>> +       }
>> +
>> +       index = 2;
>> +       rc = of_property_read_u32_index(np, name, index, &cpu_rst_cfg_reg);
> 
> Likewise for all of the above.
> 
> Thanks,
> Mark.
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux