Re: [linux-sunxi] [PATCH 2/3] arm64: allwinner: a64: add CPU opp table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello,

On 09/22/17 19:15, Icenowy Zheng wrote:
Add the operating table for the CPU (ARM cores) on Allwinner A64 SoC.

OPPs higher to 816MHz is temporarily dropped, to prevent overheat on
boards with AXP803 support and undervoltage on boards without AXP803
support.

Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
---
  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
  1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 20aba7b186aa..0532da4939eb 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -52,6 +52,23 @@
  	#address-cells = <1>;
  	#size-cells = <1>;
+ cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
  	cpus {
  		#address-cells = <1>;
  		#size-cells = <0>;
@@ -61,6 +78,10 @@
  			device_type = "cpu";
  			reg = <0>;
  			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
CLK_CPUX is not currently exposed in the dt-bindings header, so this
doesn't compile.

+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
  		};
cpu1: cpu@1 {
@@ -68,6 +89,7 @@
  			device_type = "cpu";
  			reg = <1>;
  			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
  		};
cpu2: cpu@2 {
@@ -75,6 +97,7 @@
  			device_type = "cpu";
  			reg = <2>;
  			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
  		};
cpu3: cpu@3 {
@@ -82,6 +105,7 @@
  			device_type = "cpu";
  			reg = <3>;
  			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
  		};
  	};

Thanks,
Samuel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux