Hi Icenowy, On 20/09/2017 17:18, Icenowy Zheng wrote: > The AXP803 PMIC has battery support like other AXP PMICs, but with > different definition of max target charging voltage and constant > charging current. > > Add support for AXP803 battery in axp20x-battery driver. > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> > --- > drivers/power/supply/axp20x_battery.c | 88 +++++++++++++++++++++++++++++++---- > 1 file changed, 78 insertions(+), 10 deletions(-) > > diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c > index 7494f0f0eadb..c9a9fb320c92 100644 > --- a/drivers/power/supply/axp20x_battery.c > +++ b/drivers/power/supply/axp20x_battery.c > @@ -49,6 +49,8 @@ [...] > static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val) > { > - if (axp->axp_id == AXP209_ID) > + switch (axp->axp_id) { > + case AXP209_ID: > *val = (*val - 300000) / 100000; > - else > + break; > + case AXP221_ID: > *val = (*val - 300000) / 150000; > + break; > + case AXP803_ID: > + *val = (*val - 200000) / 200000; > + /* > + * The maximum charge current on AXP803 is 2.8A, and the > + * datasheet says "1110-1111 reserved" in this part. > + * So we return an invalid value -1 in this situation, > + * which will be dealed by the caller of this function, > + */ Good, we could do that for the two others compatible as well. They are not explicitly marked as reserved but it stops at 1100 for AXP223/AXP221 for example. > + if (*val > 13) > + *val = -1; > + break; > + } > } > > static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, > @@ -269,9 +322,13 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > if (ret) > return ret; > > - if (axp20x_batt->axp_id == AXP221_ID && > - !(reg & AXP22X_FG_VALID)) > - return -EINVAL; > + switch (axp20x_batt->axp_id) { > + case AXP221_ID: > + case AXP803_ID: > + if (!(reg & AXP22X_FG_VALID)) > + return -EINVAL; > + break; > + }; Looks weird to me. if (axp20x_batt->axp_id != AXP209_ID && !(reg & AXP22X_FG_VALID)) would be a better match? [...] Thanks, Quentin -- Quentin Schulz, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html