This patch adds support for USB_OTG on Phytec phyFLEX-i.MX6 Quad module. Signed-off-by: Ashutosh singh <ashutosh.s@xxxxxxxxx> --- arch/arm/boot/dts/imx6q-phytec-pbab01.dts | 4 ++++ arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi | 22 ++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts index 7d37ec6..39e69bd 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts @@ -32,3 +32,7 @@ &usdhc3 { status = "okay"; }; + +&usbotg { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi index 1a3b50d..dcb1d59 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -18,6 +18,19 @@ memory { reg = <0x10000000 0x80000000>; }; + + regulators { + compatible = "simple-bus"; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 0>; + enable-active-low; + }; + }; }; &ecspi3 { @@ -134,6 +147,7 @@ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* USB_OTG_PWR_EN */ >; }; }; @@ -178,3 +192,11 @@ wp-gpios = <&gpio1 29 0>; status = "disabled"; }; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "disabled"; +}; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html