Allwinner H3 features DesignWare HDMI Transmitter paired with custom
PHY.
Add a glue driver for it.
For now, only video and CEC are supported. Audio will be supported at
a later time.
Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
---
drivers/gpu/drm/sun4i/Kconfig | 9 +
drivers/gpu/drm/sun4i/Makefile | 1 +
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 500 ++++++++++++++++++++++++++++++++++
3 files changed, 510 insertions(+)
create mode 100644 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig
index 06f05302ee75..589502ffe31a 100644
--- a/drivers/gpu/drm/sun4i/Kconfig
+++ b/drivers/gpu/drm/sun4i/Kconfig
@@ -40,6 +40,15 @@ config DRM_SUN4I_BACKEND
do some alpha blending and feed graphics to TCON. If M is
selected the module will be called sun4i-backend.
+config DRM_SUN8I_DW_HDMI
+ tristate "Support for Allwinner version of DesignWare HDMI"
+ depends on DRM_SUN4I
+ select DRM_DW_HDMI
+ help
+ Choose this option if you have an Allwinner SoC with the
+ DesignWare HDMI controller with custom HDMI PHY. If M is
+ selected the module will be called sun8i_dw_hdmi.
+
config DRM_SUN8I_MIXER
tristate "Support for Allwinner Display Engine 2.0 Mixer"
default MACH_SUN8I
diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
index 43c753cafc88..9c56173bf140 100644
--- a/drivers/gpu/drm/sun4i/Makefile
+++ b/drivers/gpu/drm/sun4i/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_DRM_SUN4I) += sun4i_tv.o
obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o
obj-$(CONFIG_DRM_SUN4I_HDMI) += sun4i-drm-hdmi.o
obj-$(CONFIG_DRM_SUN8I_MIXER) += sun8i-mixer.o
+obj-$(CONFIG_DRM_SUN8I_DW_HDMI) += sun8i_dw_hdmi.o
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
new file mode 100644
index 000000000000..65db3e10e311
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
@@ -0,0 +1,500 @@
+/*
+ * Copyright (c) 2017, Jernej Skrabec <jernej.skrabec@xxxxxxxx>
+ *
+ * Based on hdmi_bsp_sun8iw7.c which is:
+ * Copyright (c) 2016 Allwinnertech Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <drm/drm_of.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/bridge/dw_hdmi.h>
+
+#include "sun4i_crtc.h"
+#include "sun4i_tcon.h"
+
+#define SUN8I_HDMI_PHY_REG_POL 0x0000
+
+#define SUN8I_HDMI_PHY_REG_READ_EN 0x0010
+#define SUN8I_HDMI_PHY_REG_READ_EN_MAGIC 0x54524545
+
+#define SUN8I_HDMI_PHY_REG_UNSCRAMBLE 0x0014
+#define SUN8I_HDMI_PHY_REG_UNSCRAMBLE_MAGIC 0x42494E47
+
+#define SUN8I_HDMI_PHY_REG_CTRL 0x0020
+#define SUN8I_HDMI_PHY_REG_UNK1 0x0024
+#define SUN8I_HDMI_PHY_REG_UNK2 0x0028
+#define SUN8I_HDMI_PHY_REG_PLL 0x002c
+#define SUN8I_HDMI_PHY_REG_CLK 0x0030
+#define SUN8I_HDMI_PHY_REG_UNK3 0x0034
+
+#define SUN8I_HDMI_PHY_REG_STATUS 0x0038
+#define SUN8I_HDMI_PHY_REG_STATUS_READY BIT(7)
+#define SUN8I_HDMI_PHY_REG_STATUS_HPD BIT(19)
+
+#define SUN8I_HDMI_PHY_REG_CEC 0x003c
+
+#define to_sun8i_dw_hdmi(x) container_of(x, struct sun8i_dw_hdmi, x)
+#define set_bits(p, v) writel(readl(p) | (v), p)
+
+struct sun8i_dw_hdmi {
+ struct clk *clk_ahb;
+ struct clk *clk_ddc;
+ struct clk *clk_sfr;
+ struct device *dev;
+ struct drm_encoder encoder;
+ void __iomem *phy_base;
+ struct dw_hdmi_plat_data plat_data;
+ struct reset_control *rst_ddc;
+ struct reset_control *rst_hdmi;
+};
+
+static u32 sun8i_dw_hdmi_get_divider(int clk_khz)
+{
+ /*
+ * Due to missing documentation of HDMI PHY, we know correct
+ * settings only for following four PHY dividers. Select one
+ * based on pixel clock.
+ */
+ if (clk_khz <= 27000)
+ return 11;
+ else if (clk_khz <= 74250)
+ return 4;
+ else if (clk_khz <= 148500)
+ return 2;
+ else
+ return 1;
+}
+
+static void sun8i_dw_hdmi_encoder_disable(struct drm_encoder *encoder)
+{
+ struct sun4i_crtc *crtc = drm_crtc_to_sun4i_crtc(encoder->crtc);
+ struct sun4i_tcon *tcon = crtc->tcon;
+
+ DRM_DEBUG_DRIVER("Disabling HDMI Output\n");
+
+ sun4i_tcon_channel_disable(tcon, 1);
+}
+
+static void sun8i_dw_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+ struct sun4i_crtc *crtc = drm_crtc_to_sun4i_crtc(encoder->crtc);
+ struct sun4i_tcon *tcon = crtc->tcon;
+
+ DRM_DEBUG_DRIVER("Enabling HDMI Output\n");
+
+ sun4i_tcon_channel_enable(tcon, 1);
+}
+
+static void sun8i_dw_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adj_mode)
+{
+ struct sun8i_dw_hdmi *hdmi = to_sun8i_dw_hdmi(encoder);
+ struct sun4i_crtc *crtc = drm_crtc_to_sun4i_crtc(encoder->crtc);
+ struct sun4i_tcon *tcon = crtc->tcon;
+ u32 div;
+
+ sun4i_tcon1_mode_set(tcon, mode);
+
+ div = sun8i_dw_hdmi_get_divider(mode->crtc_clock);
+ clk_set_rate(hdmi->clk_sfr, mode->crtc_clock * 1000 * div);
+ clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000);
+}
+
+static const struct drm_encoder_helper_funcs
+ sun8i_dw_hdmi_encoder_helper_funcs = {
+ .mode_set = sun8i_dw_hdmi_encoder_mode_set,
+ .enable = sun8i_dw_hdmi_encoder_enable,
+ .disable = sun8i_dw_hdmi_encoder_disable,
+};
+
+static int sun8i_dw_hdmi_phy_init(struct dw_hdmi *hdmi_data, void *data,
+ struct drm_display_mode *mode)
+{
+ struct sun8i_dw_hdmi *hdmi = (struct sun8i_dw_hdmi *)data;
+ u32 div = sun8i_dw_hdmi_get_divider(mode->crtc_clock);
+ u32 val;
+
+ /*
+ * Unfortunately, we don't know much about those magic
+ * numbers. They are taken from Allwinner BSP driver.
+ */
+
+ val = readl(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL);
+ writel(val & ~0xf000, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL);
+
+ switch (div) {
+ case 1:
+ writel(0x30dc5fc0, hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL);
+ writel(0x800863C0, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CLK);
+ usleep_range(10000, 15000);
+ writel(1, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK3);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, BIT(25));
+ msleep(200);
+ val = readl(hdmi->phy_base + SUN8I_HDMI_PHY_REG_STATUS);
+ val = (val & 0x1f800) >> 11;
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL,
+ BIT(31) | BIT(30));
+ if (val < 0x3d)
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL,
+ val + 2);
+ else
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, 0x3f);
+ msleep(100);
+ writel(0x01FFFF7F, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL);
+ writel(0x8063b000, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK1);
+ writel(0x0F8246B5, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK2);
+ break;
+ case 2:
+ writel(0x39dc5040, hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL);
+ writel(0x80084381, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CLK);
+ usleep_range(10000, 15000);
+ writel(1, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK3);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, BIT(25));
+ msleep(100);
+ val = readl(hdmi->phy_base + SUN8I_HDMI_PHY_REG_STATUS);
+ val = (val & 0x1f800) >> 11;
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL,
+ BIT(31) | BIT(30));
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, val);
+ writel(0x01FFFF7F, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL);
+ writel(0x8063a800, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK1);
+ writel(0x0F81C485, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK2);
+ break;
+ case 4:
+ writel(0x39dc5040, hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL);
+ writel(0x80084343, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CLK);
+ usleep_range(10000, 15000);
+ writel(1, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK3);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, BIT(25));
+ msleep(100);
+ val = readl(hdmi->phy_base + SUN8I_HDMI_PHY_REG_STATUS);
+ val = (val & 0x1f800) >> 11;
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL,
+ BIT(31) | BIT(30));
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, val);
+ writel(0x01FFFF7F, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL);
+ writel(0x8063b000, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK1);
+ writel(0x0F81C405, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK2);
+ break;
+ case 11:
+ writel(0x39dc5040, hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL);
+ writel(0x8008430a, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CLK);
+ usleep_range(10000, 15000);
+ writel(1, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK3);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, BIT(25));
+ msleep(100);
+ val = readl(hdmi->phy_base + SUN8I_HDMI_PHY_REG_STATUS);
+ val = (val & 0x1f800) >> 11;
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL,
+ BIT(31) | BIT(30));
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, val);
+ writel(0x01FFFF7F, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL);
+ writel(0x8063b000, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK1);
+ writel(0x0F81C405, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK2);
+ break;
+ }
+
+ /* clear polarity bits */
+ val = readl(hdmi->phy_base + SUN8I_HDMI_PHY_REG_POL);
+ val &= ~0x300;
+
+ /*
+ * Set polarity bits if necessary. Condition in original code
+ * is a bit weird. This is attempt to make it more reasonable
+ * and it works. It could be that bits and conditions are
+ * related and should be separated.
+ */
+ if (!(mode->flags & DRM_MODE_FLAG_PHSYNC) ||
+ !(mode->flags & DRM_MODE_FLAG_PVSYNC)) {
+ val |= 0x300;
+ }
+
+ writel(val, hdmi->phy_base + SUN8I_HDMI_PHY_REG_POL);
+
+ return 0;
+}
+
+static void sun8i_dw_hdmi_phy_disable(struct dw_hdmi *hdmi_data, void *data)
+{
+ struct sun8i_dw_hdmi *hdmi = (struct sun8i_dw_hdmi *)data;
+
+ /* Disable output and stop PLL */
+ writel(7, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL);
+ writel(0, hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL);
+}
+
+static enum drm_connector_status
+ sun8i_dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi_data,
+ void *data)
+{
+ struct sun8i_dw_hdmi *hdmi = (struct sun8i_dw_hdmi *)data;
+ u32 reg_val = readl(hdmi->phy_base + SUN8I_HDMI_PHY_REG_STATUS);
+
+ return (reg_val & SUN8I_HDMI_PHY_REG_STATUS_HPD) ?
+ connector_status_connected : connector_status_disconnected;
+}
+
+static const struct dw_hdmi_phy_ops sun8i_dw_hdmi_phy_ops = {
+ .init = &sun8i_dw_hdmi_phy_init,
+ .disable = &sun8i_dw_hdmi_phy_disable,
+ .read_hpd = &sun8i_dw_hdmi_phy_read_hpd,
+};
+
+static void sun8i_dw_hdmi_init(struct sun8i_dw_hdmi *hdmi)
+{
+ u32 timeout = 20;
+ u32 val;
+
+ /*
+ * HDMI PHY settings are taken as-is from Allwinner BSP code.
+ * There is no documentation.
+ */
+ writel(0, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL, BIT(0));
+ udelay(5);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL, BIT(16));
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL, BIT(1));
+ usleep_range(10, 20);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL, BIT(2));
+ udelay(5);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL, BIT(3));
+ usleep_range(40, 100);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL, BIT(19));
+ usleep_range(100, 200);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL, BIT(18));
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL, 7 << 4);
+
+ /* Note that Allwinner code doesn't fail in case of timeout */
+ while (!(readl(hdmi->phy_base + SUN8I_HDMI_PHY_REG_STATUS) &
+ SUN8I_HDMI_PHY_REG_STATUS_READY)) {
+ if (!timeout--) {
+ dev_warn(hdmi->dev, "HDMI PHY init timeout!\n");
+ break;
+ }
+ usleep_range(100, 200);
+ }
+
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL, 0xf << 8);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL, BIT(7));
+
+ writel(0x39dc5040, hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL);
+ writel(0x80084343, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CLK);
+ usleep_range(10000, 15000);
+ writel(1, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK3);
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, BIT(25));
+ msleep(100);
+ val = readl(hdmi->phy_base + SUN8I_HDMI_PHY_REG_STATUS);
+ val = (val & 0x1f800) >> 11;
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, BIT(31) | BIT(30));
+ set_bits(hdmi->phy_base + SUN8I_HDMI_PHY_REG_PLL, val);
+ writel(0x01FF0F7F, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CTRL);
+ writel(0x80639000, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK1);
+ writel(0x0F81C405, hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNK2);
+
+ /* enable read access to HDMI controller */
+ writel(SUN8I_HDMI_PHY_REG_READ_EN_MAGIC,
+ hdmi->phy_base + SUN8I_HDMI_PHY_REG_READ_EN);
+
+ /* unscramble register offsets */
+ writel(SUN8I_HDMI_PHY_REG_UNSCRAMBLE_MAGIC,
+ hdmi->phy_base + SUN8I_HDMI_PHY_REG_UNSCRAMBLE);
+
+ /* Reset PHY CEC settings. This gives dw hdmi total control over CEC. */
+ writel(0, hdmi->phy_base + SUN8I_HDMI_PHY_REG_CEC);
+}
+
+static const struct drm_encoder_funcs sun8i_dw_hdmi_encoder_funcs = {
+ .destroy = drm_encoder_cleanup,
+};
+
+static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dw_hdmi_plat_data *plat_data;
+ struct drm_device *drm = data;
+ struct drm_encoder *encoder;
+ struct sun8i_dw_hdmi *hdmi;
+ struct resource *res;
+ int ret;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi)
+ return -ENOMEM;
+
+ plat_data = &hdmi->plat_data;
+ hdmi->dev = &pdev->dev;
+ encoder = &hdmi->encoder;
+
+ encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+ /*
+ * If we failed to find the CRTC(s) which this encoder is
+ * supposed to be connected to, it's because the CRTC has
+ * not been registered yet. Defer probing, and hope that
+ * the required CRTC is added later.
+ */
+ if (encoder->possible_crtcs == 0)
+ return -EPROBE_DEFER;
+
+ /* resource 0 is the memory region for the core controller */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ hdmi->phy_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(hdmi->phy_base))
+ return PTR_ERR(hdmi->phy_base);
+
+ hdmi->clk_ahb = devm_clk_get(dev, "iahb");
+ if (IS_ERR(hdmi->clk_ahb)) {
+ dev_err(dev, "Could not get iahb clock\n");
+ return PTR_ERR(hdmi->clk_ahb);
+ }
+
+ hdmi->clk_sfr = devm_clk_get(dev, "isfr");
+ if (IS_ERR(hdmi->clk_sfr)) {
+ dev_err(dev, "Could not get isfr clock\n");
+ return PTR_ERR(hdmi->clk_sfr);
+ }
+
+ hdmi->clk_ddc = devm_clk_get(dev, "ddc");
+ if (IS_ERR(hdmi->clk_ddc)) {
+ dev_err(dev, "Could not get ddc clock\n");
+ return PTR_ERR(hdmi->clk_ddc);
+ }
+
+ hdmi->rst_hdmi = devm_reset_control_get(dev, "hdmi");
+ if (IS_ERR(hdmi->rst_hdmi)) {
+ dev_err(dev, "Could not get hdmi reset control\n");
+ return PTR_ERR(hdmi->rst_hdmi);
+ }
+
+ hdmi->rst_ddc = devm_reset_control_get(dev, "ddc");
+ if (IS_ERR(hdmi->rst_ddc)) {
+ dev_err(dev, "Could not get ddc reset control\n");
+ return PTR_ERR(hdmi->rst_ddc);
+ }
+
+ ret = clk_prepare_enable(hdmi->clk_ahb);
+ if (ret) {
+ dev_err(dev, "Cannot enable ahb clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(hdmi->clk_sfr);
+ if (ret) {
+ dev_err(dev, "Cannot enable isfr clock: %d\n", ret);
+ goto err_ahb_clk;
+ }
+
+ ret = clk_prepare_enable(hdmi->clk_ddc);
+ if (ret) {
+ dev_err(dev, "Cannot enable ddc clock: %d\n", ret);
+ goto err_sfr_clk;
+ }
+
+ ret = reset_control_deassert(hdmi->rst_hdmi);
+ if (ret) {
+ dev_err(dev, "Could not deassert hdmi reset control\n");
+ goto err_ddc_clk;
+ }
+
+ ret = reset_control_deassert(hdmi->rst_ddc);
+ if (ret) {
+ dev_err(dev, "Could not deassert ddc reset control\n");
+ goto err_assert_hdmi_reset;
+ }
+
+ drm_encoder_helper_add(encoder, &sun8i_dw_hdmi_encoder_helper_funcs);
+ drm_encoder_init(drm, encoder, &sun8i_dw_hdmi_encoder_funcs,
+ DRM_MODE_ENCODER_TMDS, NULL);
+
+ sun8i_dw_hdmi_init(hdmi);
+
+ plat_data->phy_ops = &sun8i_dw_hdmi_phy_ops,
+ plat_data->phy_name = "sun8i_dw_hdmi_phy",
+ plat_data->phy_data = hdmi;
+
+ ret = dw_hdmi_bind(pdev, encoder, plat_data);
+
+ /*
+ * If dw_hdmi_bind() fails we'll never call dw_hdmi_unbind(),
+ * which would have called the encoder cleanup. Do it manually.
+ */
+ if (ret)
+ goto cleanup_encoder;
+
+ return 0;
+
+cleanup_encoder:
+ drm_encoder_cleanup(encoder);
+ reset_control_assert(hdmi->rst_ddc);
+err_assert_hdmi_reset:
+ reset_control_assert(hdmi->rst_hdmi);
+err_ddc_clk:
+ clk_disable_unprepare(hdmi->clk_ddc);
+err_sfr_clk:
+ clk_disable_unprepare(hdmi->clk_sfr);
+err_ahb_clk:
+ clk_disable_unprepare(hdmi->clk_ahb);
+
+ return ret;
+}
+
+static void sun8i_dw_hdmi_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ return dw_hdmi_unbind(dev);
+}
+
+static const struct component_ops sun8i_dw_hdmi_ops = {
+ .bind = sun8i_dw_hdmi_bind,
+ .unbind = sun8i_dw_hdmi_unbind,
+};
+
+static int sun8i_dw_hdmi_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &sun8i_dw_hdmi_ops);
+}
+
+static int sun8i_dw_hdmi_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &sun8i_dw_hdmi_ops);
+
+ return 0;
+}
+
+static const struct of_device_id sun8i_dw_hdmi_dt_ids[] = {
+ { .compatible = "allwinner,sun8i-h3-dw-hdmi" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sun8i_dw_hdmi_dt_ids);
+
+struct platform_driver sun8i_dw_hdmi_pltfm_driver = {
+ .probe = sun8i_dw_hdmi_probe,
+ .remove = sun8i_dw_hdmi_remove,
+ .driver = {
+ .name = "sun8i-dw-hdmi",
+ .of_match_table = sun8i_dw_hdmi_dt_ids,
+ },
+};
+module_platform_driver(sun8i_dw_hdmi_pltfm_driver);
+
+MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@xxxxxxxx>");
+MODULE_DESCRIPTION("Allwinner H3 DW HDMI bridge");
+MODULE_LICENSE("GPL");
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
