* sunil.m@xxxxxxxxxxxx <sunil.m@xxxxxxxxxxxx> [170910 23:31]:
> From: Suniel Mahesh <sunil.m@xxxxxxxxxxxx>
>
> Linux bus numbers should match the numbers defined by the chip
> manufacturer. This patch add's spi aliases to acheive that bus
> naming convention.
OK applying into omap-for-v4.14/fixes to follow what we do
already for am4372 and dra7.
Regards,
Tony
> Signed-off-by: Suniel Mahesh <sunil.m@xxxxxxxxxxxx>
> Signed-off-by: Karthik Tummala <karthik@xxxxxxxxxxxx>
> Tested-by: Karthik Tummala <karthik@xxxxxxxxxxxx>
> ---
> Note:
> - Patch was compile tested and built(ARCH=arm) on next-20170911.
> - Patch was hardware tested on AM335x (McSPI controller) with
> spi flash chips.
> - No build/run-time issues reported.
> - At present bus numbers are represented as spi1 and spi2 in sysfs
> instead of spi0 and spi1, as defined in SOC schematics.
> - The commit:
> "spi: Pick spi bus number from Linux idr or spi alias"
> (SHA1:9b61e302210eba55768962f2f11e96bb508c2408)
> has introduced bus numbering which happens dynamically either
> via Linux IDR or spi alias for master drivers.
> - The commit:
> "spi: omap: Allocate bus number from spi framework"
> (SHA1:b590782afe0a99fca84f451252ed7e2d64b2f155)
> is now using spi framework to allocate bus numbers.
> ---
> arch/arm/boot/dts/am33xx.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 7d7ca05..e58fab8 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -36,6 +36,8 @@
> phy1 = &usb1_phy;
> ethernet0 = &cpsw_emac0;
> ethernet1 = &cpsw_emac1;
> + spi0 = &spi0;
> + spi1 = &spi1;
> };
>
> cpus {
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
