Re: [PATCH 1/5] dt-bindings: document the s3c24xx software-reset register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Heiko,

On 06.01.2014 19:37, Heiko Stübner wrote:
The S3C2412/S3C2413 as well as the S3C2443 and following contain a special
register that restarts the system when written to. This adds a simple
binding, so that it gets accessible on dt systems too.

We distinguish between the two types (s3c2412, s3c2443) because the
handling of the swrst register on the s3c2412 also needs to take care
of a hardware glitch at reset time.

Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
  .../devicetree/bindings/arm/samsung/s3c24xx-swrst.txt  |   16 ++++++++++++++++
  1 file changed, 16 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/arm/samsung/s3c24xx-swrst.txt

Is there really a need to have separate bindings for this?

As far as I can see, the swreset register is a part of the clock controller, so restart function could be provided by clock driver and there would be no need to change anything in DT.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux