Hi Gregory, On Tue, Sep 19, 2017 at 04:25:58PM +0200, Gregory CLEMENT wrote: > On ven., sept. 15 2017, Baruch Siach <baruch@xxxxxxxxxx> wrote: > > > Extend the container size to 0x2000 to include the gpio controller at > > offset 0x1040. > > > > While at it, add start address notation to the gpio node name to match > > its 'offset' property. > > > > Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx> > > I made a quick test on a mcbin and I confirm that the watchdog is here > and usable. > > Tested-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> > and > Applied on mvebu/dt64 This is meant to be a reply to https://patchwork.kernel.org/patch/9947525/, right? Anyway, I see the right patch[1] at mvebu/dt64. Thanks, baruch [1] http://git.infradead.org/linux-mvebu.git/commitdiff/e34ffe32f6e7ae9191d14226ff9d8c0c47400a71 > > --- > > arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > > index 4d360713ed12..30d48ecf46e0 100644 > > --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > > +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > > @@ -254,7 +254,7 @@ > > > > ap_syscon: system-controller@6f4000 { > > compatible = "syscon", "simple-mfd"; > > - reg = <0x6f4000 0x1000>; > > + reg = <0x6f4000 0x2000>; > > > > ap_clk: clock { > > compatible = "marvell,ap806-clock"; > > @@ -265,7 +265,7 @@ > > compatible = "marvell,ap806-pinctrl"; > > }; > > > > - ap_gpio: gpio { > > + ap_gpio: gpio@1040 { > > compatible = "marvell,armada-8k-gpio"; > > offset = <0x1040>; > > ngpios = <20>; -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@xxxxxxxxxx - tel: +972.52.368.4656, http://www.tkos.co.il - -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
