Re: [PATCH v13 05/25] v4l: fwnode: Support generic parsing of graph endpoints in a device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Sakari,

Thank you for the patch.

On Friday, 15 September 2017 17:17:04 EEST Sakari Ailus wrote:
> Add two functions for parsing devices graph endpoints:
> v4l2_async_notifier_parse_fwnode_endpoints and
> v4l2_async_notifier_parse_fwnode_endpoints_by_port. The former iterates
> over all endpoints whereas the latter only iterates over the endpoints in
> a given port.
> 
> The former is mostly useful for existing drivers that currently implement
> the iteration over all the endpoints themselves whereas the latter is
> especially intended for devices with both sinks and sources: async
> sub-devices for external devices connected to the device's sources will
> have already been set up, or they are part of the master device.

Did you mean s/or they/as they/ ?

> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> ---
>  drivers/media/v4l2-core/v4l2-async.c  |  30 ++++++
>  drivers/media/v4l2-core/v4l2-fwnode.c | 185 +++++++++++++++++++++++++++++++
>  include/media/v4l2-async.h            |  24 ++++-
>  include/media/v4l2-fwnode.h           | 117 +++++++++++++++++++++
>  4 files changed, 354 insertions(+), 2 deletions(-)

[snip]

> diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c
> b/drivers/media/v4l2-core/v4l2-fwnode.c index 706f9e7b90f1..44ee35f6aad5
> 100644
> --- a/drivers/media/v4l2-core/v4l2-fwnode.c
> +++ b/drivers/media/v4l2-core/v4l2-fwnode.c

[snip]

> +static int v4l2_async_notifier_fwnode_parse_endpoint(
> +	struct device *dev, struct v4l2_async_notifier *notifier,
> +	struct fwnode_handle *endpoint, unsigned int asd_struct_size,
> +	int (*parse_endpoint)(struct device *dev,
> +			    struct v4l2_fwnode_endpoint *vep,
> +			    struct v4l2_async_subdev *asd))
> +{
> +	struct v4l2_async_subdev *asd;
> +	struct v4l2_fwnode_endpoint *vep;
> +	int ret = 0;
> +
> +	asd = kzalloc(asd_struct_size, GFP_KERNEL);
> +	if (!asd)
> +		return -ENOMEM;
> +
> +	asd->match.fwnode.fwnode =
> +		fwnode_graph_get_remote_port_parent(endpoint);
> +	if (!asd->match.fwnode.fwnode) {
> +		dev_warn(dev, "bad remote port parent\n");
> +		ret = -EINVAL;
> +		goto out_err;
> +	}
> +
> +	/* Ignore endpoints the parsing of which failed. */

I think this comment is outdated.

> +	vep = v4l2_fwnode_endpoint_alloc_parse(endpoint);
> +	if (IS_ERR(vep)) {
> +		ret = PTR_ERR(vep);
> +		dev_warn(dev, "unable to parse V4L2 fwnode endpoint (%d)\n",
> +			 ret);
> +		goto out_err;
> +	}
> +
> +	ret = parse_endpoint ? parse_endpoint(dev, vep, asd) : 0;
> +	if (ret == -ENOTCONN)
> +		dev_dbg(dev, "ignoring endpoint %u,%u\n", vep->base.port,
> +			vep->base.id);

How about "ignoring port@%u/endpoint@%u\n" ? It would make the message more 
explicit.

> +	else if (ret < 0)
> +		dev_warn(dev, "driver could not parse endpoint %u,%u (%d)\n",

Same here.

> +			 vep->base.port, vep->base.id, ret);
> +	v4l2_fwnode_endpoint_free(vep);
> +	if (ret < 0)
> +		goto out_err;
> +
> +	asd->match_type = V4L2_ASYNC_MATCH_FWNODE;

I'd move this line right before setting asd->match.fwnode.fwnode.

> +	notifier->subdevs[notifier->num_subdevs] = asd;
> +	notifier->num_subdevs++;
> +
> +	return 0;
> +
> +out_err:
> +	fwnode_handle_put(asd->match.fwnode.fwnode);
> +	kfree(asd);
> +
> +	return ret == -ENOTCONN ? 0 : ret;
> +}
> +
> +static int __v4l2_async_notifier_parse_fwnode_endpoints(
> +	struct device *dev, struct v4l2_async_notifier *notifier,
> +	size_t asd_struct_size, unsigned int port, bool has_port,
> +	int (*parse_endpoint)(struct device *dev,
> +			    struct v4l2_fwnode_endpoint *vep,
> +			    struct v4l2_async_subdev *asd))
> +{
> +	struct fwnode_handle *fwnode = NULL;
> +	unsigned int max_subdevs = notifier->max_subdevs;
> +	int ret;
> +
> +	if (WARN_ON(asd_struct_size < sizeof(struct v4l2_async_subdev)))
> +		return -EINVAL;
> +
> +	for (fwnode = NULL; (fwnode = fwnode_graph_get_next_endpoint(
> +				     dev_fwnode(dev), fwnode)); ) {
> +		if (!fwnode_device_is_available(
> +			    fwnode_graph_get_port_parent(fwnode)))

Doesn't fwnode_graph_get_port_parent() increment the refcount on the parent, 
which you should then release ?

> +			continue;
> +
> +		if (has_port) {
> +			struct fwnode_endpoint ep;
> +
> +			ret = fwnode_graph_parse_endpoint(fwnode, &ep);
> +			if (ret) {
> +				fwnode_handle_put(fwnode);
> +				return ret;
> +			}
> +
> +			if (ep.port != port)
> +				continue;
> +		}
> +		max_subdevs++;
> +	}
> +
> +	/* No subdevs to add? Return here. */
> +	if (max_subdevs == notifier->max_subdevs)
> +		return 0;
> +
> +	ret = v4l2_async_notifier_realloc(notifier, max_subdevs);
> +	if (ret)
> +		return ret;
> +
> +	for (fwnode = NULL; (fwnode = fwnode_graph_get_next_endpoint(
> +				     dev_fwnode(dev), fwnode)); ) {
> +		if (!fwnode_device_is_available(
> +			    fwnode_graph_get_port_parent(fwnode)))

Same here.

> +			continue;
> +
> +		if (WARN_ON(notifier->num_subdevs >= notifier->max_subdevs)) {
> +			ret = -EINVAL;
> +			break;
> +		}
> +
> +		if (has_port) {
> +			struct fwnode_endpoint ep;
> +
> +			ret = fwnode_graph_parse_endpoint(fwnode, &ep);
> +			if (ret)
> +				break;
> +
> +			if (ep.port != port)
> +				continue;
> +		}
> +
> +		ret = v4l2_async_notifier_fwnode_parse_endpoint(
> +			dev, notifier, fwnode, asd_struct_size, parse_endpoint);
> +		if (ret < 0)
> +			break;
> +	}
> +
> +	fwnode_handle_put(fwnode);
> +
> +	return ret;
> +}

[snip]

> diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h
> index c69d8c8a66d0..96fa1afc00dd 100644
> --- a/include/media/v4l2-async.h
> +++ b/include/media/v4l2-async.h
> @@ -18,7 +18,6 @@ struct device;
>  struct device_node;
>  struct v4l2_device;
>  struct v4l2_subdev;
> -struct v4l2_async_notifier;
> 
>  /* A random max subdevice number, used to allocate an array on stack */
>  #define V4L2_MAX_SUBDEVS 128U
> @@ -50,6 +49,10 @@ enum v4l2_async_match_type {
>   * @match:	union of per-bus type matching data sets
>   * @list:	used to link struct v4l2_async_subdev objects, waiting to be
>   *		probed, to a notifier->waiting list
> + *
> + * When this struct is used as a member in a driver specific struct,
> + * the driver specific struct shall contain the @struct
> + * v4l2_async_subdev as its first member.

Unless I'm mistaken @ is used to refer to function arguments (sphinx typesets 
it using <strong> in HTML). References to structures can be created with &. 
Have you compiled the documentation ? :-)

>   */
>  struct v4l2_async_subdev {
>  	enum v4l2_async_match_type match_type;
> @@ -78,7 +81,8 @@ struct v4l2_async_subdev {
>  /**
>   * struct v4l2_async_notifier - v4l2_device notifier data
>   *
> - * @num_subdevs: number of subdevices
> + * @num_subdevs: number of subdevices used in the subdevs array
> + * @max_subdevs: number of subdevices allocated in the subdevs array
>   * @subdevs:	array of pointers to subdevice descriptors
>   * @v4l2_dev:	pointer to struct v4l2_device
>   * @waiting:	list of struct v4l2_async_subdev, waiting for their drivers
> @@ -90,6 +94,7 @@ struct v4l2_async_subdev {
>   */
>  struct v4l2_async_notifier {
>  	unsigned int num_subdevs;
> +	unsigned int max_subdevs;
>  	struct v4l2_async_subdev **subdevs;
>  	struct v4l2_device *v4l2_dev;
>  	struct list_head waiting;
> @@ -121,6 +126,21 @@ int v4l2_async_notifier_register(struct v4l2_device
> *v4l2_dev, void v4l2_async_notifier_unregister(struct v4l2_async_notifier
> *notifier);
> 
>  /**
> + * v4l2_async_notifier_release - release notifier resources
> + * @notifier: the notifier the resources of which are to be released
> + *
> + * Release memory resources related to a notifier, including the async
> + * sub-devices allocated for the purposes of the notifier. The user is
> + * responsible for releasing the notifier's resources after calling
> + * @v4l2_async_notifier_parse_fwnode_endpoints.

Don't use @. If you want sphinx to generate a link, just append () after the 
function name.

> + *
> + * There is no harm from calling v4l2_async_notifier_release in other

Here too.

> + * cases as long as its memory has been zeroed after it has been
> + * allocated.

As the function WARNs for types other than V4L2_ASYNC_MATCH_FWNODE you might 
want to mention that in the documentation.

> + */
> +void v4l2_async_notifier_release(struct v4l2_async_notifier *notifier);
> +
> +/**
>   * v4l2_async_register_subdev - registers a sub-device to the asynchronous
>   * 	subdevice framework
>   *
> diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h
> index 68eb22ba571b..83afac48ea6b 100644
> --- a/include/media/v4l2-fwnode.h
> +++ b/include/media/v4l2-fwnode.h
> @@ -25,6 +25,8 @@
>  #include <media/v4l2-mediabus.h>
> 
>  struct fwnode_handle;
> +struct v4l2_async_notifier;
> +struct v4l2_async_subdev;
> 
>  #define V4L2_FWNODE_CSI2_MAX_DATA_LANES	4
> 
> @@ -201,4 +203,119 @@ int v4l2_fwnode_parse_link(struct fwnode_handle
> *fwnode, */
>  void v4l2_fwnode_put_link(struct v4l2_fwnode_link *link);
> 
> +/**
> + * v4l2_async_notifier_parse_fwnode_endpoints - Parse V4L2 fwnode endpoints
> in a
> + *						device node
> + * @dev: the device the endpoints of which are to be parsed
> + * @notifier: notifier for @dev
> + * @asd_struct_size: size of the driver's async sub-device struct,
> including
> + *		     sizeof(struct v4l2_async_subdev). The &struct
> + *		     v4l2_async_subdev shall be the first member of
> + *		     the driver's async sub-device struct, i.e. both
> + *		     begin at the same memory address.
> + * @parse_endpoint: Driver's callback function called on each V4L2 fwnode
> + *		    endpoint. Optional.
> + *		    Return: %0 on success
> + *			    %-ENOTCONN if the endpoint is to be skipped but this
> + *				       should not be considered as an error
> + *			    %-EINVAL if the endpoint configuration is invalid
> + *
> + * Parse the fwnode endpoints of the @dev device and populate the async
> sub-
> + * devices array of the notifier. The @parse_endpoint callback function is
> + * called for each endpoint with the corresponding async sub-device pointer
> to
> + * let the caller initialize the driver-specific part of the async sub-
> device
> + * structure.
> + *
> + * The notifier memory shall be zeroed before this function is called on
> the
> + * notifier.
> + *
> + * This function may not be called on a registered notifier and may be
> called on
> + * a notifier only once.
> + *
> + * Do not change the notifier's subdevs array, take references to the
> subdevs
> + * array itself or change the notifier's num_subdevs field. This is because
> this
> + * function allocates and reallocates the subdevs array based on parsing
> + * endpoints.
> + *
> + * The @struct v4l2_fwnode_endpoint passed to the callback function
> + * @parse_endpoint is released once the function is finished. If there is a
> need
> + * to retain that configuration, the user needs to allocate memory for it.
> + *
> + * Any notifier populated using this function must be released with a call
> to
> + * v4l2_async_notifier_release() after it has been unregistered and the
> async
> + * sub-devices are no longer in use, even if the function returned an
> error.
> + *
> + * Return: %0 on success, including when no async sub-devices are found
> + *	   %-ENOMEM if memory allocation failed
> + *	   %-EINVAL if graph or endpoint parsing failed
> + *	   Other error codes as returned by @parse_endpoint
> + */
> +int v4l2_async_notifier_parse_fwnode_endpoints(
> +	struct device *dev, struct v4l2_async_notifier *notifier,
> +	size_t asd_struct_size,
> +	int (*parse_endpoint)(struct device *dev,
> +			      struct v4l2_fwnode_endpoint *vep,
> +			      struct v4l2_async_subdev *asd));
> +
> +/**
> + * v4l2_async_notifier_parse_fwnode_endpoints_by_port - Parse V4L2 fwnode
> + *							endpoints of a port in a
> + *							device node

This clearly shows that the function name is getting a bit long :-)

> + * @dev: the device the endpoints of which are to be parsed
> + * @notifier: notifier for @dev
> + * @asd_struct_size: size of the driver's async sub-device struct,
> including
> + *		     sizeof(struct v4l2_async_subdev). The &struct
> + *		     v4l2_async_subdev shall be the first member of
> + *		     the driver's async sub-device struct, i.e. both
> + *		     begin at the same memory address.
> + * @port: port number where endpoints are to be parsed
> + * @parse_endpoint: Driver's callback function called on each V4L2 fwnode
> + *		    endpoint. Optional.
> + *		    Return: %0 on success
> + *			    %-ENOTCONN if the endpoint is to be skipped but this
> + *				       should not be considered as an error
> + *			    %-EINVAL if the endpoint configuration is invalid
> + *
> + * This function is just like @v4l2_async_notifier_parse_fwnode_endpoints
> with
> + * the exception that it only parses endpoints in a given port. This is
> useful
> + * on devices that have both sinks and sources: the async sub-devices
> connected
> + * to sources have already been set up by another driver (on capture
> devices).
> + *
> + * Parse the fwnode endpoints of the @dev device on a given @port and
> populate
> + * the async sub-devices array of the notifier. The @parse_endpoint
> callback
> + * function is called for each endpoint with the corresponding async sub-
> device
> + * pointer to let the caller initialize the driver-specific part of the
> async
> + * sub-device structure.
> + *
> + * The notifier memory shall be zeroed before this function is called on
> the
> + * notifier the first time.
> + *
> + * This function may not be called on a registered notifier and may be
> called on
> + * a notifier only once per port.
> + *
> + * Do not change the notifier's subdevs array, take references to the
> subdevs
> + * array itself or change the notifier's num_subdevs field. This is because
> this
> + * function allocates and reallocates the subdevs array based on parsing
> + * endpoints.
> + *
> + * The @struct v4l2_fwnode_endpoint passed to the callback function
> + * @parse_endpoint is released once the function is finished. If there is a
> need
> + * to retain that configuration, the user needs to allocate memory for it.
> + *
> + * Any notifier populated using this function must be released with a call
> to
> + * v4l2_async_notifier_release() after it has been unregistered and the
> async
> + * sub-devices are no longer in use, even if the function returned an
> error.
> + *
> + * Return: %0 on success, including when no async sub-devices are found
> + *	   %-ENOMEM if memory allocation failed
> + *	   %-EINVAL if graph or endpoint parsing failed
> + *	   Other error codes as returned by @parse_endpoint
> + */
> +int v4l2_async_notifier_parse_fwnode_endpoints_by_port(
> +	struct device *dev, struct v4l2_async_notifier *notifier,
> +	size_t asd_struct_size, unsigned int port,
> +	int (*parse_endpoint)(struct device *dev,
> +			      struct v4l2_fwnode_endpoint *vep,
> +			      struct v4l2_async_subdev *asd));
> +
>  #endif /* _V4L2_FWNODE_H */


-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux