Hi Andrzej, On 18 September 2017 at 15:32, Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx> wrote: > Hi all, > > this short series addresses two issues. > > The first issue is devices not enumerating when connected to an Odroid XU4, > to its 3.0 root hub. The interplay between refactoring certain parts of > dwc3's code and handling the SUSPHY quirk results in the said problem. > Please see: https://patchwork.kernel.org/patch/9535235/ > Actually using the quirk solves it. > > The second issue is devices not enumerating and/or wrongly enumerating > as high speed instead of super speed on an Odroid XU3. There was a patch > series from Vivek Gautam in circulation, but it got lost somehow. > Please see: > > https://lkml.org/lkml/2014/9/2/166 > https://lkml.org/lkml/2015/2/2/257 > > I adapted his patch so that it does not use a hacky solution to force > additional initialization in order for calibration to happen. > Instead I used the .reset() in phy_ops. I could have used the .set_mode(), > but the calibration must happen only after dwc3_host_init() but > phy_set_mode() is called either after of before it. With this patch > enumeration happens correctly and a super speed device is recognized as such. > > Rebased onto v4.13. It also applies cleanly to Felipe's testing/next. > > Andrzej Pietrasiewicz (1): > ARM: dts: exynos: Add dwc3 SUSPHY quirk > > Vivek Gautam (1): > phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800 > > arch/arm/boot/dts/exynos54xx.dtsi | 2 + > drivers/phy/samsung/phy-exynos5-usbdrd.c | 183 +++++++++++++++++++++++++++++++ > drivers/usb/dwc3/core.c | 8 +- > 3 files changed, 191 insertions(+), 2 deletions(-) > Thanks for rending this patch series. I would like to suggestion some more pointer to this issue. Both the usb 2.0 phy and usb 3.0 tune and calibrate are missing in the current driver. Lately I have searched on this topic on github so accidentally landed on. [0] https://github.com/wanam/Adam-Kernel-GalaxyS6-G920F/blob/master/drivers/usb/phy/phy-samsung-usb3-cal.c [1] https://github.com/wanam/Adam-Kernel-GalaxyS6-G920F/blob/master/drivers/usb/phy/phy-samsung-usb2-cal.c I have tried to mapped few of the change and was able to partially stabilize the driver. But few of the changes are mixed with other platform soc probably Exynos 5433. Would it be possible for you to look into into this new approach to fix and stabilize this driver. Best Regards -Anand Moon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
